Uni-Directional Digital Cable Products Supporting m-card m-udcp device Acceptance Test Plan tp-atp-m-udcp-i05-20080304 issued notice This Test Plan document is furnished by Cable Television Laboratories, Inc



Download 3.36 Mb.
Page31/31
Date28.01.2017
Size3.36 Mb.
#10091
1   ...   23   24   25   26   27   28   29   30   31

M

Submit a copy of the Dolby Digital Certificate and Dolby Laboratory acceptance letter.

HPIL, 5.6

Elementary Stream Buffer


HNETdig_vid.22

The M-UDCP SHALL use an MPEG-2 decoder that is capable of decoding video streams with the low_delay flag enabled.

M

Indicate support for how your device handles low_delay flags in the video sequence extension specific to buffer underflow.

NIF, 2.4.3.2

Dolby

HNETdig_aud.2

The M-UDCP SHALL use the ISO_639_language_descriptor, when present, as defined in [ISO/IEC 13818-1] and constrained by [ANSI/SCTE 54], to identify the language associated with audio tracks and to allow access to each available Complete Main audio stream of stream type 0x81 in a given service.

M

Submit a copy of the Dolby Digital Certificate and Dolby Laboratory acceptance letter.

HD, Annex B Section 6

Dolby

HNETdig_aud.4

The M-UDCP SHALL recognize the synchronization word as syncword = 0x0B77

M

Submit a copy of the Dolby Digital Certificate and Dolby Laboratory acceptance letter.

NIT, 5.4.1.1

Dolby

HNETdig_aud.5

The M-UDCP with audio decoding capabilities SHALL support the frequency code fscod = ‘00’ (which is the sampling rate of 48 kHz).

M

Submit a copy of the Dolby Digital Certificate and Dolby Laboratory acceptance letter.

NIT, 5.4.1.3

HD, Annex B 5.1, 5.2



Dolby

HNETdig_aud.6

The M-UDCP SHALL accept the audio constraints called out in table B1 of reference HD: Any main audio service or associated audio service containing all necessary program elements will have the frmsizecod element less than or equal to ‘011110’, indicating 448 kbps.

M

Submit a copy of the Dolby Digital Certificate and Dolby Laboratory acceptance letter.

HD, Table B-1

Dolby

HNETdig_aud.7

The M-UDCP SHALL support the AC3 audio with a bsid = ‘01000’.

M

Submit a copy of the Dolby Digital Certificate and Dolby Laboratory acceptance letter.

NIT, 5.4.2.1

Dolby

HNETdig_aud.8

The M-UDCP SHALL not be adversely affected by any audio service type (bsmod) defined in HD Annex B Table B2.

M

Submit a copy of the Dolby Digital Certificate and Dolby Laboratory acceptance letter.

HD, Annex B 6.2

Appendix A, R-33



Dolby

HNETdig_aud.9

The M-UDCP SHALL support the AC3 audio with acmod = as defined in Table 5.8 of NIT.

M

Submit a copy of the Dolby Digital Certificate and Dolby Laboratory acceptance letter.

NIT, 5.4.2.3 Table 5.8

Dolby

HNETdig_aud.11

The M-UDCP SHALL not be adversely affected by any audio service type (bsmod) defined in HD Annex B Table B2.

M

Submit a copy of the Dolby Digital Certificate and Dolby Laboratory acceptance letter.

HD, Annex B-6.2, Appendix A, R-33

Dolby

HNETdig_aud.12

The M-UDCP SHALL accept the audio constraints called out in table B-1 of reference HD: The combined rate of a main and an associated service intended to be simultaneously decoded SHALL be less than or equal to 512 kbps.

M

Submit a copy of the Dolby Digital Certificate and Dolby Laboratory acceptance letter.

HD, Annex B 5.1

Dolby

Audio.15

The M-UDCP SHALL be certified by Dolby Laboratories, Inc. for Dolby Digital™ decoding.

M

Submit a copy of the Dolby Digital Certificate and Dolby Laboratory acceptance letter.

Appendix A, R-375

EAS

HNIEAS.30

The M-UDCP SHALL process multi-lingual alert_text(), and SHALL choose at most one language for display when text is provided multi-lingually.

M

Using flowcharts and/or (pseudo) code, demonstrate software analysis to ensure compliance processing of a multi-lingual alert text.

NIQ, 5, 7.2 #15 Appendix A, R-341

Macrovision

HACP.2

The M-UDCP SHALL use APS bits to control copy protection encoding on analog video outputs (Macrovision) as follows: APS=00 no encoding, utilize specific modes of analog protection encoding for APS=01,10,and 11.

Note: Analog copy protection only applies to analog outputs as constrained by the license agreement.



M

Submit a copy of the Macrovision Certificate.

HPIN, 9.1.2

Direct Pick-up

HMech.31

Prior to production, the manufacturer shall demonstrate or document that the M-UDCP meets the requirements of 47 CFR 15.118 (c)(3) Direct pickup interference.

M

Submit complete documentation,

including test results, model number, tester, date, interference levels, test equipment used.



Appendix A, R-202

Radiated Emissions

HMech.7

The M-UDCP SHALL meet radiated emissions limits caused by cable signals on the product's cable RF connector input in accordance with 47 CFR 76.605 (12) (15 uV/m at 30 m for frequencies outside the range 54 to 216 MHz and 20 uV/m at 3 m for frequencies inside the range 54 to 216 MHz).

M

Submit complete documentation,

including test results, model number, tester, date, interference levels, test equipment used.



Appendix A, R-200

Plugfest

HDST.15

If the M-UDCP has a HMDI or DVI output, for the manufacturer’s first M-UDCP or UDCP, manufacturer agrees to participate with cable operators and cable operator vendors in a digital interface plugfest event.

C-M

Submit documentation verifying

this model participated in an authorized plugfest, for example, the participation agreement OR registration form (must show model number and plugfest dates.)



Appendix A, R-40




1 The modified logic analyzer adapter card refers to the standard SYCARD PCCextend 145, which has been changed to allow access to signals CD1 and CD2.

2 : The modified logic analyzer adapter card refers to the standard SYCARD PCCextend, 145 which have been changed to allow access to signals CD1 and CD2. Rework as follows: CD1 connect to JP2 pin F, CD2 connect to JP1 pin A.



Download 3.36 Mb.

Share with your friends:
1   ...   23   24   25   26   27   28   29   30   31




The database is protected by copyright ©ininet.org 2024
send message

    Main page