Uni-Directional Digital Cable Products Supporting m-card m-udcp device Acceptance Test Plan tp-atp-m-udcp-i05-20080304 issued notice This Test Plan document is furnished by Cable Television Laboratories, Inc


Minimum FAT Power Interoperability test



Download 3.36 Mb.
Page27/31
Date28.01.2017
Size3.36 Mb.
#10091
1   ...   23   24   25   26   27   28   29   30   31

12.3.2Minimum FAT Power Interoperability test


All tests in this section are to be performed with the assumption that the CableCARD under test is being used to test interoperability with “vendor XXX” hosts on the Harmonic head-end network. The power level of the FAT channel should be attenuated to –15dBmV for 64 QAM, -12dBmV for 256 QAM and 0dBmV for analog. Check plant with a spectrum analyzer. This test will ensure interoperability of the CableCARD under test “vendor XXX” hosts combination at minimum power levels.


12.3.2.1Verify the ability of NDS CableCARD, “vendor XXX” host combination to tune clear analog channels. Tune “vendor XXX” host to displayed an analog channel. Verify audio and video on TV.


Results

Comments



     



12.3.2.2Verify the ability of NDS CableCARD, “vendor XXX” host combination to tune unencrypted QAM64.Tune “vendor XXX” host to QAM64 channel. Verify audio and video on TV.


Results

Comments



     



12.3.2.3Verify the ability of NDS CableCARD, “vendor XXX host combination to tune unencrypted QAM256. Tune “vendor XXX” host to QAM256 channel. (Refer to NDS/Harmonic Channel map) Verify audio and video on the TV.


Results

Comments



     



12.3.2.4Authorize a NDS CableCARD “vendor XXX” host combination for an encrypted digital service through the NDS system. Verify the host can display the encrypted digital service.


Results

Comments



     



12.3.2.5De-authorize a NDS CableCARD “vendor XXX” host combination for an encrypted digital service through the NDS system. Verify the host cannot display the encrypted digital service.


Results

Comments



     



12.3.2.6Verify NDS CableCARD and “vendor XXX” host ability to re-acquire QAM64 FAT channel. Tune NDS CableCARD and “vendor XXX” host combination, to QAM64 multiplex. Physically remove F-connector from the back of the host. Wait 10 seconds and reconnect. Verify that the NDS CableCARD and “vendor XXX” host combination can re-acquire QAM64 FAT channel and display audio and video on TV.


Results

Comments



     



12.3.2.7Verify NDS CableCARD and “vendor XXX” host ability to re-acquire QAM256 FAT Channel. Tune NDS CableCARD and “vendor XXX” host combination to display QAM256 channel. (Refer to NDS/Harmonic Channel map) Physically remove F-connector from the back of the host. Wait 10 seconds and reconnect. Verify that the NDS CableCARD and “vendor XXX” host combination can re-acquire QAM256 FAT channel and display audio and video on TV.


Results

Comments



     



12.3.2.8Verify that the NDS CableCARD and “vendor XXX” host combination can pass through content advisory information present in the VBI lines to a TV with a V-Chip present. To do this set up a TV with rating control via remote control for TV. Set up V-Chip to block any content over a rating “G”. Channel through the channel map for analog and digital services and verify the TV has the ability to read the VBI lines and block the video with a rating above “G”.


Results

Comments



     



12.3.2.9Tune the NDS CableCARD, “vendor XXX” host combination to an analog service. Send an EAS message from the NDS/Harmonic head-end and verify EAS message is displayed correctly on a TV.


Results

Comments



     



12.3.2.10Tune the NDS CableCARD, “vendor XXX” host combination to digital service. Send an EAS message from the NDS/Harmonic head-end and verify EAS message is displayed correctly on a TV.


Results

Comments



     





Download 3.36 Mb.

Share with your friends:
1   ...   23   24   25   26   27   28   29   30   31




The database is protected by copyright ©ininet.org 2024
send message

    Main page