Zero Point Energy doc
Download 0.97 Mb. View original pdf
|
- Navigate this page:
- The Standard Power Extraction Circuit
| ZP OWER C ORPORATION PAGE OF 352 Z ERO P OINT E NERGY circuit is completely separate from the primary source during cycle two the primary source (the battery) is not connected to anything. In other words, all we've taken from the primary source (the battery) is current-free, force-field-free potential gradient. Soto speak, we've taken a "chunk of potential gradient" from the source, nothing else. You simply multiply the potential gradient's local energy density (the so-called "voltage, which is really excess joules per coulomb) by the number of coulombs of charge that is "activated" (that "collects" this voltage or excess joules/coulomb) in the collector. Specifically, we have not taken any power from the battery itself, and so we have not done any internal work inside the battery upon its internal resistance, by a "closed circuit electron flow" back into the battery. We have not permitted such a flow. Instead, we are using the activated collector as a temporary, secondary battery. We will utilize this secondary battery in a conventional manner to power the load, which will also kill the secondary battery dissipate its trapped EM energy. But that will not affect the primary source. The primary source is never used to directly power the load. It is only used as an infinite source of potential gradient (i.e., as an infinite source of energy density. The Standard Power Extraction Circuit The Conventional Circuit We digress momentarily In the standard electrical method, the potential source (which is a bipolarity) is connected across the load. This connects both the external load and the internal resistance of the battery itself in series, as the "total circuit load" Electrons then pour through the external load circuit and through the internal battery resistance, from the "electron rich" polarity of the source to its "electron poor" opposite polarity. The scattering of energy in the internal battery resistance is actually doing work to upset the chemistry that is maintaining the battery's charge separation the bipolarity. In this manner the source's separation of charges (which is the "gate" furnishing the potential/energy gradient) is being destroyed as the current flows, and this in turn destroys the source of the potential gradient. In other words, normally we engineers are trained to kill the bipolarity, which kills the potential source itself Incredible as it maybe, we engineers and scientists have been trained to utilize the free "trapped EM energy" furnished by nature through the source, to destroy the source of the energy/potential, with the same vigor as we power the external load In fact, our teachers themselves simply have never learned any other way to do it except this deliberately "self-destructive" manner |