Analog: Dial-up Internet Access



Download 18.97 Kb.
Date13.06.2017
Size18.97 Kb.
#20312

Analog: Dial-up Internet Access


Also called dial-up access, an analog Internet connection is both economical and slow. Using a modem connected to your PC, users connect to the Internet when the computer dials a phone number (which is provided by your ISP) and connects to the network. Dial-up is an analog connection because data is sent over an analog, public-switched telephone network. The modem converts received analog data to digital and vice versa. Because dial-up access uses normal telephone lines the quality of the connection is not always good and data rates are limited. Typical Dial-up connection speeds range from 2400 bps to 56 Kbps. Today, analog has been widely replaced by broadband (Cable and DSL).

ISDN - Integrated Services Digital Network


Integrated services digital network (ISDN) is an international communications standard for sending voice, video, and data over digital telephone lines or normal telephone wires. Typical ISDN speeds range from 64 Kbps to 128 Kbps.

B-ISDN - Broadband ISDN


Broadband ISDN is similar in function to ISDN but it transfers data over fiber optic telephone lines, not normal telephone wires. SONET is the physical transport backbone of B-ISDN. Broadband ISDN has not been widely implemented.

DSL – Digital Subscriber Line


DSL is frequently referred to as an "always on" connection because it uses existing 2-wire copper telephone line connected to the premise so service is delivered simultaneously with wired telephone service -- it will not tie up your phone line as an analog dial-up connection does. The two main categories of DSL for home subscribers are called ADSL and SDSL. All types of DSL technologies are collectively referred to as xDSL. xDSL connection speeds range from 128 Kbps to 9 Mbps.

Recommended Reading: Cable vs. DSL.

ADSL - Asymmetric Digital Subscriber Line


ADSL is the most commonly deployed types of DSL in North America. Short for asymmetric digital subscriber line ADSL supports data rates of from 1.5 to 9 Mbps when receiving data (known as the downstream rate) and from 16 to 640 Kbps when sending data (known as the upstream rate). ADSL requires a special ADSL modem.

ADSL+2 - ADSL Extension


An extension to ADSL broadband technology that provides subscribers with significantly faster download speeds when compared to traditional ADSL connections. ADSL+2 works in the same fashion as ADSL a special filter is installed on a subscriber's telephone line to split existing copper telephone lines (POTS) between regular telephone (voice) and ADSL+2. ADSL2+ service is most commonly offered in highly-populated metropolitan areas and subscribers must be in close geographical locations to the provider's central office to receive ADSL2+ service.

SDSL - Symmetric Digital Subscriber Line


Short for symmetric digital subscriber line, SDSL is a technology that allows more data to be sent over existing copper telephone lines (POTS). SDSL supports data rates up to 3 Mbps. SDSL works by sending digital pulses in the high-frequency area of telephone wires and cannot operate simultaneously with voice connections over the same wires. SDSL requires a special SDSL modem. SDSL is called symmetric because it supports the same data rates for upstream and downstream traffic.

VDSL - Very High DSL


Very High DSL (VDSL) is a DSL technology that offers fast data rates over relatively short distances — the shorter the distance, the faster the connection rate.

Cable - Broadband Internet Connection


Through the use of a cable modem you can have a broadband Internet connection that is designed to operate over cable TV lines. Cable Internet works by using TV channel space for data transmission, with certain channels used for downstream transmission, and other channels for upstream transmission. Because the coaxial cable used by cable TV provides much greater bandwidth than telephone lines, a cable modem can be used to achieve extremely fast access. Cable providers typically implement a cap to limit capacity and accommodate more customers. Cable speeds range from 512 Kbps to 20 Mbps.

Recommended Reading: What is 250 GB?

Wireless Internet Connections


Wireless Internet, or wireless broadband is one of the newest Internet connection types. Instead of using telephone or cable networks for your Internet connection, you use radio frequency bands. Wireless Internet provides an always-on connection which can be accessed from anywhere — as long as you geographically within a network coverage area. Wireless access is still considered to be relatively new, and it may be difficult to find a wireless service provider in some areas. It is typically more expensive and mainly available in metropolitan areas.

Recommended Reading: Webopedia's Wireless Networking Standards page.

T-1 Lines – Leased Line


T-1 lines are a popular leased line option for businesses connecting to the Internet and for Internet Service Providers (ISPs) connecting to the Internet backbone. It is a dedicated phone connection supporting data rates of 1.544Mbps. A T-1 line actually consists of 24 individual channels, each of which supports 64Kbits per second. Each 64Kbit/second channel can be configured to carry voice or data traffic. Most telephone companies allow you to buy just one or some of these individual channels. This is known as fractional T-1access. T-1 Lines support speeds of 1.544 Mbps. Fractional T-1 speeds are 64 Kbps per channel (up to 1.544 Mbps), depending on number of leased channels.

Bonded T-1


A bonded T-1is two or more T-1 lines that have been joined (bonded) together to increase bandwidth. Where a single T-1 provides approximately 1.5Mbps, two bonded T1s provide 3Mbps or 46 channels for voice or data. Two bonded T-1s allow you to use the full bandwidth of 3Mbps where two individual T-1s can still only use a maximum of 1.5Mbps at one time. To be bonded the T-1 must run into the same router at the end, meaning they must run to the same ISP. Typical Bonded T-1 (two bonded T-1 lines) speed is around 3 Mbps.

T-3 Lines – Dedicated Leased Line


T-3 lines are dedicated phone connections supporting data rates of about 43 to 45 Mbps. It too is a popular leased line option. A T-3 line actually consists of 672 individual channels, each of which supports 64 Kbps. T-3 lines are used mainly by Internet Service Providers (ISPs) connecting to the Internet backbone and for the backbone itself. Typical T-3 supports speeds ranging from 43 to 45 Mbps.

OC3 - Optical Carrier


Short for Optical Carrier, level 3 it is used to specify the speed of fiber optic networks conforming to the SONET standard. OC3 is typically used as a fiber optic backbone for large networks with large voice, data, video, and traffic needs. Speeds are 155.52 Mbps, or roughly the speed of 100 T1 lines.

Internet over Satellite


Internet over Satellite(IoS) allows a user to access the Internet via a satellite that orbits the earth. A satellite is placed at a static point above the earth's surface, in a fixed position. Because of the enormous distances signals must travel from the earth up to the satellite and back again, IoS is slightly slower than high-speed terrestrial connections over copper or fiber optic cables. Typical Internet over satellite connection speeds (standard IP services) average around 492 up to 512 Kbps.

Download 18.97 Kb.

Share with your friends:




The database is protected by copyright ©ininet.org 2024
send message

    Main page