Cihangir duran



Download 97.65 Kb.
Date08.05.2017
Size97.65 Kb.
CV
CIHANGIR DURAN

30.08.2015


PERSONAL INFORMATION:

Date of Birth: 30.09.1971

Place of Birth: Turkey

Address: Yıldırım Beyazıt University, Materials Engineering Department, Ankara, Turkey

E-mail: cihangirduran@yahoo.com and cduran@ybu.edu.tr


EXECUTIVE SUMMARY:

Education:

Degree

Department

Institution

Year

B.Sc.

Metallurgical Engineering

Middle East Technical University, Ankara, Turkey

1994

M.Sc.

Materials Science and Engineering

Gebze Technical University (formerly Gebze Institute of Technology), Kocaeli, Turkey

1996

Ph.D.

Materials Science and Engineering

Pennsylvania State University, PA, USA

2001


Work Experience:

Year

Title

Institution

Department

4/2013 – Cont.

Prof. Dr.

Yıldırım Beyazıt University, Ankara, Turkey

Materials Engineering

(Head since 6/2014)



6/2014-9/2014

Visiting Scientist

NASA Glenn Research Center, Cleveland, OH, USA

Ceramics Branch

4/2013 – 6/2014

10/2014- 7/2015



Technical Advisor

Meteksan Savunma Sanayii A.Ş. (Meteksan Defense Industry Inc.), Ankara, Turkey

Underwater Acoustic System Engineering

2/2010 - 4/2013

Technology Research Leader / Manager

Meteksan Savunma Sanayii A.Ş. (Meteksan Defense Industry Inc.), Ankara, Turkey

Underwater Acoustic System Engineering

2006-2009

Part time instructor

Yeditepe University, İstanbul, Turkey

Faculty of Arts and Sciences

2007-2010

Founding co-partner

MSE Teknoloji A.Ş. (MSE Technology Inc), Kocaeli, Turkey

Ceramics processing and Sonar technologies

3/2006 – 2/2010

Assoc. Prof. Dr.

Gebze Technical University, Kocaeli, Turkey

Materials Science and Engineering

2/2002 – 3/2006

Assist. Prof. Dr.

Gebze Technical University, Kocaeli, Turkey

Materials Science and Engineering

11/2003-2/2005,

7/2005-9/2005,

6/2006-9/2006,

6/2008-9/2008



Visiting Scientist

National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan

Advanced Sintering Technology Group


8/2001- 2/2002

Post-doctoral Fellow

Pennsylvania State University, PA, USA

Materials Science and Engineering

8/1998 – 8/2001

Research Assistant

Pennsylvania State University, PA, USA

Materials Science and Engineering

8/1994 - 2/2002

Research Assistant

Gebze Technical University, Kocaeli, Kocaeli, Turkey

Materials Science and Engineering



EDUCATION:


  • 1996 to 2001: Pennsylvania State University, University Park, Pennsylvania, USA

PhD Degree: Materials Science and Engineering, Ceramic Science Option

Thesis: “Fabrication and electrical properties of textured Sr0.53Ba0.47Nb2O6 ceramics prepared by templated grain growth";

Key words: Ceramic powder synthesis by solid state, hydrothermal, precipitation, and molten salt methods; Crystal growth by flux method; Tape casting; Sintering; Texture; Electrical characterization (dielectric, piezoelectric, pyroelectric properties); Characterization (XRD, SEM); Processing-microstructure-property relations; Modeling

Advisors: Dr. Gary L. Messing and Dr. Susan Trolier-McKinstry

Ph.D. Committee: Robert E. Newnham, L. Eric Cross, Clive A. Randall


  • 1994 to 1996: Gebze Institute of Technology, Gebze/Kocaeli, TURKEY.

MSc Degree: Materials Science and Engineering


Thesis: “Effect of liquid phase and sintering conditions on the properties of Cr3C2/NiFe and Cr3C2/CrNi cermets”

Key words: Hard materials; Sintering; Densification; Hardness; Fracture toughness; Anisotropic grain growth.

Advisor: Dr. Ahmet Ayhan and Dr. Şerafettin Eroğlu (now at Istanbul University)


  • 1989 to 1994: Middle East Technical University, Ankara, TURKEY

BSc Degree: Metallurgical Engineering





  • Seydişehir High School, Konya, Turkey


EXPERIENCE:

  • 04/2013 – Cont.: Yıldırım Beyazıt University, Materials Engineering Department, Ankara, TURKEY

Professor
06/2014- Cont.: Department Head
Courses taught:

MCE201 Materials Science (for Mechanical Engineering Department)

MSE205 Materials Characterization Techniques

ENGR214 Materials for Engineers (for Electrical and Electronic Engineering Department)

MSE304 Processing of Materials II

MSE302 Materials Processing Lab II

MSE517 Sintering Theory

MSE530 Advanced Ceramic Processing

MSE537 Advanced Materials Characterization Techniques


  • NASA Glenn Research Center, Ceramics Branch, Cleveland, OH, USA

06/2014-09/2014: Visiting Scientist (at the Dr. Alp Şehirlioğlu’s group)


Textured thermoelectric ceramics and their characterizations



  • Meteksan Savunma Sanayii A.Ş. (Defence Industry), Ankara, TURKEY

10/2014 – 7/2015.: Technical Advisor

04/2013– 06/2014: Technical Advisor

02/2010 – 04/2013: Technology Research Leader and Underwater Acoustics System Engineering Manager

Technical management of underwater acoustics projects given by Undersecretariat for Defence Industries of Turkey such as MİLGEM Sonar (national sonar projects) and other confidential projects; Proposal preparation and project management; Establishment of acoustic infrastructure such as ceramic fabrication, transducer fabrication and test facilities (open lake, pressure tank, etc.); Ceramic composition preparation, powder synthesis, sintering and electrical characterization; Design, fabrication and characterization of underwater devices such as active and passive transducers, flank arrays, planar and conformal arrays, and vector sensors, etc.; Application of Materials Science and Engineering approach to the acoustics field such as development of mechanically-strong but acoustically-transparent fiber-reinforced polymer composite parts to be used at deep water.


  • MSE Teknoloji Ltd., Gebze/Kocaeli, TURKEY

2007-2010: Founding Co-partner

Design and fabrication of advanced ceramics such as underwater devices, ceramic filters and crucibles for high temperature use; Design and fabrication of laboratory devices such as attrition and ball mills, manual and automatic presses, tape caster, cold isostatic presses and similar ones; Technical management of ceramic and acoustic-related projects.


  • Yeditepe University, Istanbul, TURKEY

2006-2009: Part-time instructor

Courses taught:

Math 171 and 172: Calculus for Economics Students I and II




  • National Institute of Advanced Industrial Science and Technology (AIST), Advanced Sintering Technology Group, Japan

11/2003-2/2005, 7/2005-9/2005, 6/2006-9/2006 and 6/2008-9/2008: Visiting Scientist (at the Dr. Koji Watari’s group)

Nano powder (e.g., ZrO2 and BaTiO3) synthesis by hydrothermal, hydrothermal-ball milling and precipitation methods, aqueous dispersion and sintering of nano ZrO2 powders, fabrication of macroporous materials, covalently bonded particles in SiO2 green bodies prepared by tape casting, extrusion of Al2O3 and Si3N4 ceramics with organic and inorganic binders, sintering and characterization (XRD, SEM, FTIR, etc.).


  • Gebze Institute of Technology (now Gebze Technical University), Materials Science and Engineering Department, Gebze/Kocaeli, TURKEY

3/2006 – 2/2010: Associate Professor

2/2002 –3/2006: Assistant Professor

8/1994 2/2002: Research Assistant

Processing-microstructure-property relations in electronic (e.g., KSr2Nb5O15, (Pb,Ba)Nb2O6, (Sr,Ba)TiO3, BaTiO3, lead-based relaxors, PZT, etc.) and structural (e.g., carbide, nitride, boride, mullite and alumina-based) ceramics. Nanopowder synthesis by top-down (e.g., high energy mechanical milling) and bottom-up (e.g., chemical methods such as precipitation and hydrothermal) methods and nanopowder processing by colloidal methods such as dispersion and tape casting.


Courses taught:

MBM304 Crystal Chemistry

MBM362 Materials Processing II (Ceramic Processing)

MBM463 Ceramic Powder Synthesis by Chemical Methods

MBM562 Advanced Ceramic Processing

MBM663 Sintering Theory

MBM614 Point Defects in Solids
M.Sc. Thesis Advised:

Investigation of the electrical and mechanical properties of ferroelectric ceramics/ Ceren Efe 2007

Investigation of the stability and the rheological properties of aqueous suspensions of barium titanate powders/ Aslı Çelebi 2007

Fabrication and characterization of ceramics for solid oxide fuel cells applications/ Ezgi Demiralp 2009

Powder synthesis, fabrication and characterization of electroceramic undoped and doped Pb(Zr,Ti)O3]/ İdil Ayan 2009

Powder synthesis, fabrication and characterizations of lead-based electroceramics / Erdem Akça 2010

Fabricating and characterization of barium titanate based ceramics/ Serkan Ersoy 2010
M.Sc. Thesis Co-advised:

Production of textured ferroelectric KSr2Nb5O15 ceramics by using template particles / Kağan Yurdal 2004

Dielectric, piezoelectric and electromechanical characterization of lead-based electronic ceramics / İstek Erdağ 2011

Processing of electrolyte, anode and cathode ceramic materials for solid oxide fuel cells and investigation of their ionic conductivity properties / Burcu Yılmaz 2011





  • Pennsylvania State University, University Park, Pennsylvania, USA

8/2001- 2/2002: Postdoctoral Fellow

Texturing of Pb(Mg1/3Nb2/3)O3-PbTiO3 ceramics by templated grain growth, using SrTiO3 templates.





  • Pennsylvania State University, University Park, Pennsylvania, USA

8/1998 – 8/2001: Research Assistant:

Fabrication and electrical properties in (Sr,Ba)Nb2O6, Pb(Zr,Ti)O3, Pb(Yb1/2Nb1/2)O3-PbTiO3, Pb(Zn1/3Nb2/3)O3-PbTiO3, Pb(Mg1/3Nb2/3)O3-PbTiO3 ceramics; Microstructure control by templated grain growth; Processing-property relations




  • Powder Metal Inc., İstanbul, TURKEY

6/1993 - 8/1993:Summer practice

Fabrication of various products such as electrical contact and automobile parts, using powder metallurgy techniques.




  • Seydişehir Aluminum Plant, Seydişehir, TURKEY

6/1992 - 8/1992:Summer practice:

Melting and alloying of aluminum in induction furnace




PROJECTS:

  1. Fabrication and characterization of novel ferroelectric materials with improved properties, Project Manager (2003-2005), State Planning Organization of Turkey.

  2. Texture development and electrical properties of ferroelectric ceramics with tungsten bronze crystal structure, Project Manager (2003-2005), TÜBİTAK (MİSAG 245)

  3. Molten salt synthesis and characterization of single crystal, shape-anisotropic (e.g., acicular or platelet) ceramic particles, Project Manager (2002-2003), Gebze Institute of Technology-Scientific Research Projects (02-B-03-01-13)

  4. Design of sonars and fabrication by gel casting method, Project Researcher, (2002-2004) TÜBİTAK ( MİSAG 202)

  5. Superhigh energy milling in the production of hard alloys, ceramic and composite materials- Proposal Acronym: ACTIVATION (# 505885-1), European Frame Program 6 (2004-2007)

  6. Improving the toughness of mullite/ZrO2-based composites by templated grain growth and transformation toughening methods and modeling of mechanisms contributing to the toughness enhancement, Project Researcher, (2005-2009) TÜBİTAK

  7. Fabrication of multilayer actuators from textured Pb(Mg1/3Nb2/3)O3-PbTiO3 single layers, Project Researcher, (2005-2007) TÜBİTAK (MISAG 104 M 189)

  8. Designing, fabrication and characterization of underwater acoustic devices (Transducers/hydrophones), Project Manager (2007-2010), TÜBİTAK (107M333)

  9. Mechanical activation, low temperature sintering and mechanical properties of ZrB2 and ZrB2–based ceramics, Project Researcher (15.05.2009-14.05.2011) Bor Institute (BOREN).

  10. Designing and fabrication of underwater acoustic devices using piezoelectric ceramics (KOSGEB project, 2007-2009), Project Manager (with MSE Teknoloji Ltd.)

  11. Fabrication of nebulizers (cold water mist generator) using piezoelectric ceramics (TUBİTAK-TEYDEB project (2008-2009), Project Manager, (with MSE Teknoloji Ltd.)

  12. Si3N4-based ceramic powder synthesis and characterization, TUBİTAK-TEYDEB project (2008-2010), Project Manager, (with MSE Teknoloji Ltd.)

  13. Deagglomeration of submicron and nanoparticles of ceramic materials and detonation diamond, 2010-2012, Tübitak-Rusya Temel Araştırmalar Vakfı (RFBR) Joint Project between Turkey and Russia (109M712), Project Researcher

  14. Confidential projects related to underwater acoustics transducer and array designs given by Undersecretariat for Defence Industries of Turkey (2010-2012), Project Engineering Manager (with Meteksan Savunma Sanayii A.Ş.)

  15. Fabrication of underwater acoustic transducers using Pb(Mg1/3Nb2/3)O3-Pb(Yb1/2Nb1/2)O3-PbTiO3 piezoceramics, Project Manager (2013-2014), Yıldırım Beyazıt University-Scientific Research Projects (No:664)

  16. Establishment of the Materials Engineering Infrastructure, Project Manager (2014-2015), Yıldırım Beyazıt University-Scientific Research Projects (No:1674)

  17. Establishment of the Materials Engineering Infrastructure, Project Manager (2015), Yıldırım Beyazıt University-Scientific Research Projects (No:1965)



PUBLICATIONS:

1. S. Eroglu and C. Duran, “Processing and properties of a 85%Cr3C2-10.5%Ni-4.5%Fe cermet,” Scripta Materialia, 37[7], pp.991-997 (1997).

2. C. Duran and S. Eroglu, “Liquid-phase sintering and properties of Cr3C2/NiCr cermets”, Journal of Materials Processing Technology, Vol. 74, pp.69-73 (1998).

3. C. Duran, S. Trolier-McKinstry, and G. L. Messing, “Fabrication and electrical properties of textured Sr0.53Ba0.47Nb2O6 ceramics by templated grain growth,” Journal of the American Ceramic Society, 83[9], pp. 2203-2213 (2000) (146+ citations)

4. C. Duran, G. L. Messing, and S. Trolier-McKinstry, “Densification and phase formation in seeded, reactively sintered Sr0.53Ba0.47Nb2O6 ceramics,” Journal of Materials Science, 37, 5041-5049 (2002).

5. C. Duran, S. Trolier-McKinstry, and G. L. Messing, “Dielectric and piezoelectric properties of textured Sr0.53Ba0.47Nb2O6 ceramics prepared by templated grain growth”, Journal of Materials Research, 18 [1], 228-238 (2003).

6. C. Duran, S. Trolier-McKinstry, and G. L. Messing, “Processing and Electrical Properties of 0.5Pb(Yb1/2Nb1/2)O3-0.5PbTiO3 ceramics,” Journal of Electroceramics, 10[1], 47-55 (2003).


7. K. Yurdal, C. Duran, S. Alkoy, and H. I. Bakan “Texture development in KSr2Nb5O15 ceramics fabricated by reactive templated grain growth,” Key Engineering Materials Vol.264-268, pp.1285-89 (2004).

8. C. Duran, G. L. Messing, and S. Trolier-McKinstry, “Molten salt synthesis of anisometric particles in the SrO-Nb2O5-BaO system,” Materials Research Bulletin Vol. 39/11, pp. 1679-89 (2004).

9. G. L. Messing, E. M. Sabolsky, S. Trolier-McKinstry, C. Duran, S. Kwon, B. Brahmaroutu, P. Park, H. Yilmaz, P.W. Rehrig, K. B. Eitel, E. Suvaci and M. Seabaugh, “Templated Grain Growth of Textured Piezoelectric Ceramics” Critical Reviews in Solid State and Materials Sciences Vol. 29, pp. 49-96 (2004) (244+citations)

10. C. Duran and Y. K. Tur, “Templated Grain Growth of Textured Mullite/Zirconia Composites” Materials Letters Vol. 59/2-3, pp 245-249 (2005)

11. C. Duran, J. Yu, K. Sato, Y. Hotta, and K. Watari, “Colloidal Processing, Surface Characterization and Sintering of Nano ZrO2 Powders,” Journal of Materials Research Vol. 20[5], pp 1348-55 (2005)

12. Y. Jia, Y. Hotta, C. Duran, K. Sato and K. Watari, “Kinetic study on Nano-ZrO2 from ZrOCl2 solution modified with diglycol,” Journal of the Ceramic Society of Japan 113(5), pp 380-382 (2005)

13. Y. Jia, C. Duran, Y. Hotta, K. Sato and K. Watari, “The effect of polyelectrolyte on preparing macroporous ZrO2 ceramics” Journal of Materials Science 40, pp. 2903 – 2909, (2005)

14. Y. Jia, C. Duran, Y. Hotta, K. Sato and K. Watari, “Macroporous ZrO2 ceramics prepared from colloidally stable nanoparticles building blocks and organic templates” Journal of Colloid and Interface Science 291 (2005) 292–295

15. C. Duran, J. Yu, Y. Hotta, K. Sato, and K. Watari, “Hydrothermal synthesis of nano ZrO2 powders” Key Engineering Materials 317-318 (2006) pp. 195-198

16. W. Chen, S. Kume, C. Duran and K. Watari, “Preparation of single crystalline Sr0.5Ba0.5Nb2O6 particles” Journal of the European Ceramic Society 26[4-5] (2006) pp. 647-653

17. W. Chen, S. Kume, C. Duran and K. Watari, “Effect of different salts on fabrication of Sr0.5Ba0.5Nb2O6 particles in molten salt synthesis,” Key Engineering Materials 317-318 (2006) pp. 69-72

18. C. Duran and Y. K. Tur, “Phase Formation and Texture Development in Mullite/Zirconia Composites Fabricated by Templated Grain Growth”, Journal of Materials Science, 41 (2006) 3303-3313

19. C. Duran, “Processing and ferroelectric behavior of textured KSr2Nb5O15 ceramics, Journal of Materials Science, 41 (22) (2006) 7620-7627

20. T. Wlodek, M. Sopicka-Lizer, H. Gocmez and C. Duran “Influence of the milling environment on the reaction progress in the Si-Al2O3 system” Journal of the European Ceramic Society,27(2-3) (2007) 739-742

21. C. Duran, Y. Hotta, K. Sato, and K. Watari “Covalently Connected Particles in Green Bodies Fabricated by Tape Casting”, Journal of the American Ceramic Society, 90 [1] 279–282 (2007)

22. T. Nagaoka, C. Duran, T. Isobe, Y. Hotta and K.i Watari, “Hydraulic Alumina Binder for Extrusion of Alumina Ceramics”, Journal of the American Ceramic Society,90 [12] 3998–4001 (2007)

23. Y. Hotta, C. Duran, K. Sato, T. Nagaoka and K. Watari “Densification and Grain Growth in BaTiO3 Ceramics Fabricated from Nanopowders Synthesized by Ball-milling Assisted Hydrothermal Reaction” Journal of the European Ceramic Society 28, 599–604 (2008)

24. C. Duran, H. Gocmez and H. Yilmaz “Dispersion of mechanochemically-activated SiC and Al2O3 powders” Materials Science and Engineering A 475 [1-2], 23-26 (2008)

25. Y. Hotta, K. Tsunekawa, C. Duran, K. Sato, T. Nagaoka and K. Watari “Low-temperature sintering of BaTiO3 powders prepared by hydrothermal process with ball milling system” Materials Science and Engineering A 475 [1-2], 57-61 (2008)

26. S. Alkoy, C. Duran and D. A. Hall, “Electrical properties of textured KSr2Nb5O15 ceramics fabricated by reactive templated grain growth”, Journal of the American Ceramic Society 91 [5] 1597–1602 (2008)

27. E. Yassıtepe, C.Öztürk, H.C. Yatmaz, K.Öztürk, C.Duran “Photocatalytic Efficiency of ZnO Plates in Degradation of Azo Dye Solutions” Journal of Photochemistry and Photobiology A: Chemistry, 198, 1–6 (2008).

28. C. Duran, K. Sato, Y. Hotta, T. Nagaoka, and K. Watari, “Eco-friendly processing and methods for ceramic materials – A review”, Journal of the Ceramic Society of Japan,116[11], 1175-1181 (2008)

29. Erdem AKÇA, Hüseyin YILMAZ and Cihangir DURAN “Processing and electrical properties in lead-based (Pb(Mg1/3Nb2/3)O3, Pb(Yb1/2Nb1/2)O3, PbTiO3) systems”, Journal of the American Ceramic Society, 93[1], 28–31 (2010)

30. H. Gocmez, M. Tuncer, Z. Gokyer, H. Fujimori, C. Duran “The preparation and characterization of Al2O3 / ZrO2 nanocrystalline composite by a simple gel method" Materials Sci. Eng. B, 173, 80-83 (2010)

31. S. Dursun and C. Duran, “Processing and electrical properties of Pb0.6Ba0.4Nb2O6 ceramics”, Journal of Materials Research, 25(11), 2143-2149 (2010)

32. Soonil Lee, Sinan Dursun, Cihangir Duran, and Clive A. Randall “Thermoelectric Power Factor Enhancement of Textured Ferroelectric SrxBa1-xNb2O6-δ Ceramics”, Journal of Materials Research 26(1) (2011), pp. 26 -30.

33. Erdem AKÇA and Cihangir DURAN “Fabrication and Characterizations of (Pb(Mg1/3Nb2/3)O3, Pb(Yb1/2 Nb1/2)O3, PbTiO3) Ternary System Ceramics”, Ceramics International 37 (7), pp. 2135-2142 (2011)

34. H.S. Güder, E. Sahin, O. Sahin, H. Göçmez, C. Duran and H. Ali Çetinkara , “Vickers and Knoop Indentation Microhardness Study of -SiAlON Ceramic” 120(6), Acta Physica Polonica A (2011)

35.  Nagaoka, Takaaki; Duran, Cihangir; Gocmez, Hasan; Hideki Hyuga and Koji Watari “Hydraulic alumina as an inorganic binder for extruding and sintering Si3N4 ceramics”, Journal of the Ceramic Society of Japan, 120(1404), pp. 330-333 (2012)

36. Malgorzata Sopicka-Lizer, Cihangir Duran, Hasan Gocmez, Tomasz Pawlik, Marta Mikuskiewicz and Ken MacKenzie “Effect of high energy milling on the formation and properties of sialon ceramics prepared from silicon nitride - aluminium nitride precursors” Ceramics International, 39(4), pp. 4269-4279 (2013)

37. Nuray Karakus, A. Osman Kurt, Cihangir Duran, Cem Öztürk and H. Özkan Toplan “Sintering behaviour of silicon nitride powders produced by carbothermal reduction and nitridation” Advanced Powder Technology, 24(3), pp. 697-702 (2013)

38. Erdem Akça, İstek Tatar and Cihangir Duran “Dielectric and Electromechanical Properties of Mn-doped 0.2875 Pb(Mg1/3Nb2/3)O3-0.2875 Pb(Yb1/2Nb1/2)O3-0.425PbTiO3 Ceramics” Journal of Materials Science, 48(23), pp. 8287-8291 (2013)

39. Cihangir Duran, Kimiyasu Sato, Yuji Hotta, Hasan Göçmez and Koji Watari, “Ball Milling Assisted Hydrothermal Synthesis of Nano ZrO2 Powders,” Ceramics International, 41(4), pp.5588-5593 (2015)

40. Cihangir Duran, Ahmet Levent Avşar, İstek Tatar, Selçuk Koçyiğit, Alper Bereketli, Murat Şansal and Selçuk Alparslan, “Effect of Acoustic Radiation Materials on the Acoustic Properties of Transducer Arrays - Modeling and Testing” submitted to Australian Acoustics (2015)

41. Cihangir Duran, Abdullah Yildiz, Sinan Dursun, Jon Mackey and Alp Sehirlioglu, “Thermoelectric characteristics of textured KSr2Nb5O15 ceramics”, submitted to Scripta Materialia (2015)

42. Cihangir Duran, Sinan Dursun and Erdem Akça, “High strain, <001>-textured Pb(Mg1/3Nb2/3)O3-Pb(Yb1/2Nb1/2)O3-PbTiO3 piezoelectric ceramics”, submitted to Scripta Materialia (2015)

PROCEEDINGS:

1. S. Eroglu and C. Duran, “Effect of sintering temperature on the properties of Cr3C2/NiFe cermets”, European Powder Metallurgy Symposium (EURO PM’95), Birmingham, UK, p. 210, (1995).

2. C. Duran and S. Eroglu, “Effect of liquid phase sintering on the properties of Cr3C2/NiCr cermets”, 1st International Symposium on Powder Metallurgy, Gazi University, Ankara, Turkey, p. 539 (1996) (in Turkish).

3. C. Duran, S. T-McKinstry, and G. L. Messing, “Processing and electrical properties of Pb(Yb1/2Nb1/2)O3-PbTiO3 ceramics at the morphotropic phase boundary,” Proceedings of 12th IEEE International Symposium on the Applications of Ferroelectrics, Edited by S.K. Streiffer, B.J. Gibbons, and T. Tsurumi, pp.409-412 (2000).

4. E. Sabolsky, C. Duran, B. Brahmaroutu, S. Trolier-McKinstry, and G. L. Messing, “Fabrication of textured ferroelectric ceramics by templated grain growth,” Polish Ceramics Bulletin, Edited By J. Liz, 60, pp.21-26 (2000).

5. E. Sabolsky, C. Duran, B. Brahmaroutu, S. Trolier-McKinstry, and G. L. Messing, “Textured ferroelectric ceramics by templated grain growth with property anisotropy”, Proceedings of the 7th International Conference on Ceramic Processing Science, 15-18 May 2000, Inuyama City, Japan, and appeared in Ceramic Processing Science–VI, Edited by S. Hirano, G. L. Messing, N.E. Claussen, American Ceramic Society, Westerwille, OH, pp.747-753 (2001).

6. E. Sabolsky, C. Duran, B. Brahmaroutu, S. Trolier-McKinstry, and G. L. Messing, “Templated grain growth-The art and science of patterning ceramic microstructures,” Techna-Monographs in Materials and Society 5, Edited by N. Claussen, pp. 237-45 (2001).

7. S. Trolier-McKinstry, E. Sabolsky, S. Kwon, C. Duran, T. Yoshimura, J.-H. Park, Z. Zhang, and G. L. Messing “Oriented films and ceramics of relaxor ferroelectric – PbTiO3 solid solutions,” In Piezoelectric Materials in Devices, ed. N. Setter. EPFL Swiss Federal Institute of Technology,

Lausanne, 2002, pp. 497–518.



8. C. Ozturk, C. Duran, Y.K. Tur and H. Yilmaz, “Mechanical properties of textured mullite/zirconia ceramics” pp. 313-318, Proceedings of the VI. Ceramic Congress with International Participation, 30 Oct.-1 Nov. 2006, Sakarya University, Turkey, 2006

9. A. A. Gultekin, C. Duran and H. Yilmaz “Ceramic powder synthesis and phase evolution in the (1-x)[(1-y)(Pb(Mg1/3Nb2/3)O3)-y(Pb(Yb1/2Nb1/2)O3)]-xPbTiO3 system” pp.266-271 Proceedings of the VI. Ceramic Congress with International Participation, 30 Oct.-1 Nov.2006, Sakarya University, Turkey, 2006

10. M. Sopicka-Lizer, T. Pawlik, T. Włodek, M. Tańcula, C. Duran and H. Gocmez,” Preparation and characterization of nanostructured silicon-nitride based ceramics” Ecers, Verona, Italy 2008.

11. Ali ÖZER, Yahya Kemal TÜR and Cihangir DURAN “Investigation of Sintering Behavior And Mechanical Properties of Cr3C2-NiCr Cermets” XVI. National Mechanics Congress, Kayseri, June 2009, Kayseri, Turkey

12. Mehmet KONYAR, Didem OVALI, H. Cengiz YATMAZ, Cihangir DURAN and Koray ÖZTÜRK “Photocatalytic Efficiency of ZnO/TiO2 Composite Plates in Degradation of RR180 Dye Solutions” Advances in Science and Technology,12th INTERNATIONAL CERAMICS CONGRESS, Editors: Pietro VINCENZINI, Mark HADFIELD and Alberto PASSERONE, Vol. 65, pp 244-250 (2010) Trans Tech Publications, Switzerland.

13. Ali ÖZER, Yahya Kemal TÜR and Cihangir DURAN, “Effect of Polymorphic Zirconia Phases on the Mechanical and Wear Properties of Cr3C2-NiCr Cermets” Advances in Science and Technology,12th INTERNATIONAL CERAMICS CONGRESS, Editors: Pietro VINCENZINI, Mark HADFIELD and Alberto PASSERONE, Vol.64, pp 59-65 (2010)Trans Tech Publications, Switzerland

14. K. Sato, M. Kawai, Y. Hotta, T. Nagaoka, K. Watari and C. Duran, “Mutual linkage of particles in ceramic green bodies through reactive organic binders” Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, Edited by: Tatsuki Ohji and Mrityunjay Singh, Vol. 28 No 7, pp. 35-47 (2008) John Wiley and Sons.

15. K. Sato, Y. Hotta, T. Nagaoka, K. Watari and C. Duran, “Novel ceramic forming methods with a reactive organic binder,” Enviromental Issues and waste management technologies in the materials and nuclear industries XII, Edited by: Alex Cozzi and Tatsuki Ohji, Ceramic Transcations Volume 207, pp.235-243 (2009), John Wiley and Sons.

16. Yuji Hotta, Cihangir Duran, Kimiyasu Sato, and Koji Watari “Colloidal Processing and Sintering of Nano-ZrO2 Powders Using Polyethylenimine (PEI)” Characterization, Design, And Processing of Nanosize Powders And Nanostructured Materials, Edited by: Kevin G. Ewsuk and Yury Gogotsi, Ceramic Transcations Volume 190, pp.85-95 (2006), John Wiley and Sons.

17. Tür, Y. K., Sünbül, A. E., Yilmaz, H. and Duran, C. Effect of Mullite Grains Orientation on Toughness of Mullite/Zirconia Composites, in Ceramic Materials and Components for Energy and Environmental Applications (eds D. Jiang, Y. Zeng, M. Singh and J. Heinrich), John Wiley & Sons, Inc., Hoboken, NJ, USA, (2010). doi: 10.1002/9780470640845.ch38

18. A.L. Avşar, İ. Tatar and C. Duran, “Dynamical Modeling and Verification of Underwater Acoustic System, ” Topics in Model Validation and Uncertainty Quantification, Vol. 5 Conference Proceedings of the Society for Experimental Mechanics Series, pp 255-263, 2013

19. C. Efe, H. Yilmaz, Y. K. Tur, and C. Duran, “Mechanical Property Characterization of Na1/2Bi1/2TiO3-BaTiO3 Ceramics” International Journal of Chemical Engineering and Applications, Vol. 5, No. 5, 2014.

Total citations: 906 (according to Google Academic Citation Search, http://scholar.google.com.tr/citations?hl=tr&user=AZIsSRUAAAAJ)

h-index: 13

i10-index: 18

CONFERENCE ORGANIZATIONS:

1. Conference chairs: C. Duran and E. Suvaci

The 2nd Workshop on Anisotropic Science and Technology of Materials and Devices,

22-25 June 2008, Kocaeli, Turkey

2. Technical Committee, The 5th International Powder Metallurgy Conference, October 8-12, 2008, Ankara, Turkey.

3. Organizing committee of Symposium 3 (Nano-Crystals and Advanced Powder Technology), The 3rd International Congress on Ceramics (ICC3), Nov.14-18, 2010, Osaka, Japan.

4. Session Chair, the 3rd Naval System Seminar with international participation, METU, 11-12 October 2010, Ankara, Turkey.

5. Advisory Board, the 16th International Metallurgy & Materials Congress (IMMC 2012) 13-15 September 2012, Istanbul, Turkey

6. Session Chair, the 5th Naval System Seminar with international participation, METU, 8-9 October 2012, Ankara, Turkey.

7. Scientific Committee, 4th International Advances in Applied Physics and Materials Science Congress & Exhibition, April 2014, Turkey

8. Scientific Committee, International Congress & Exhibition on Current Trends on Science Technology Education (SCITEED), April 2014, Turkey

9. Academic Advisory Committee, The International Porous and Powder Materials Symposium and Exhibition, PPM 2015, September 15-18, 2015, Turkey

CONFERENCE PARTICIPATIONS:

1. 100th American Ceramic Society Meeting, Cleveland, Ohio, USA, 1998

2. 101st American Ceramic Society Meeting, Indianapolis, Indiana, USA, 1999

3. 102nd American Ceramic Society Meeting, St. Louis, Missouri, USA, 2000

4. 103rd American Ceramic Society Meeting, Indianapolis, Indiana, USA, 2001

5. The Second International Conference on the Science, Technology, and Application of Sintering, The Pennsylvania State University, PA, November 1-3, 1999, USA

6. 8th European Ceramic Society Meeting, 29 June- 3 July 2003, Istanbul, Turkey

7. 8th International Symposium on Synergy Ceramics, February 5-6 2004, Tokyo, Japan

8. Green Manufacturing in Ceramics, July 9, 2004, Nagoya, Japan

9. International Symposium on Inorganic and Environmental Materials (ISIEM)



October 18-21, Eindhoven, The Netherlands, 2004

10. Third International Symposium on the Science of Engineering Ceramics, October 31-November 3, 2004, Osaka, Japan

11. First International Workshop on Anisotropic Science and Technology of Materials and Devices, October 31-November 1, 2004, Osaka, Japan

12. The 43rd Symposium on Basic Science of Ceramics, January 20-21, 2005, Chiba, Japan

13. International Symposium on Inorganic Interfacial Engineering, Stockholm, Sweden, June 20-21, 2006

14. VI. Ceramic Congress with International Participation, 30 Oct.-1 Nov. 2006, Sakarya, Turkey, 2006

15. The 5th Asian Meeting on Electroceramics, Bangkok, Thailand, December 2006

16. 10th International Conference on Ceramic Processing Science (ICCPS-10), Inuyama, Japan, May 25-28, 2008.

17. Second International Workshop on Anisotropic Science and Technology of Materials and Devices, June 22-25, 2008, Gebze, Turkey

18. VII. Ceramic Congress with international participitation, Afyon Kocatepe University, Afyon, Turkey, 26-28 November 2008.

19. PacRim 8 Conference on Ceramic and Glass Technology, May 31 - June 5, 2009 Vancouver, British Columbia, Canada.

20. Undersea Defense Technologies, Munich 2010, Germany

21. 3rd Naval System Seminar with international participation, METU, October 11-12 2010, Ankara, Turkey.

22. The 3rd International Congress on Ceramics (ICC3), Nov.14-18 2009, Osaka, Japan.

23. International Symposium Acoustic Transduction Materials and Devices, May 10-12 2011, PA, USA.

24. 5th Naval System Seminar with international participation, METU, October 8-9 2012, Ankara, Turkey

25. The 8th Asian Meeting on Electroceramics, Pattaya, Thailand, December 10-14, 2012.

26. 5th PCGMR/NCKU Symposium on “ Nano-Technology/-Materials for Energy, Electronics and Others” Tainan, Taiwan, December 11-14, 2013.

27. 1st International Aeronautics and Astronautics Conference, University of Turkish Aeronautical Association, September 25-26 2014, Ankara, Turkey

28. Workshop on Advanced Materials and Processing, Undersecretariat for Defence Industries of Turkey (Savunma Sanayii Müsteşarlığı), Organized by SaSaD and Roketsan, December 2-3 2014 Ankara, Turkey

29. 2015 Joint IEEE International Symposium on Applications of Ferroelectric (ISAF) – International Symposium on Integrated Functionalities (ISIF) – Piezoresponse Force Microscopy Workshop (PFM) Conference, 24-27 May 2015, Singapore

PRESENTATIONS:

1. C. Duran, Gary L. Messing, and Susan Trolier-McKinstry, “Electrical properties of textured Sr0.53Ba0.47Nb2O6 ceramics”, 101st American Ceramic Society Meeting, Indianapolis, Indiana, USA, 1999.

2. C. Duran, Gary L. Messing, and Susan Trolier-McKinstry, “Microstructure-property relations in textured Sr0.53Ba0.47Nb2O6 ceramics” 102nd American Ceramic Society Meeting, St. Louis, Missouri, USA, 2000.

3. C. Duran, Gary L. Messing, and Susan Trolier-McKinstry, “Processing and electrical properties of textured Sr0.53Ba0.47Nb2O6 ceramics”, 103rd American Ceramic Society Meeting, Indianapolis, Indiana, USA, 2001.

4. C. Duran, S. Trolier-McKinstry, and G. L. Messing, “Templated grain growth of Sr0.53Ba0.47Nb2O6 ceramics,” Sintering’99, The Second International Conference on the Science, Technology, and Application of Sintering, The Pennsylvania State University, Pennsylvania, USA, 1999.

5. C. Duran, S. Trolier-McKinstry, and G. L. MessingModeling of polarization in highly textured Sr0.53Ba0.47Nb2O6 ceramics prepared by templated grain growth” 8th European Ceramic Society Meeting, Istanbul, Turkey, 2003

6. C. Duran, Y. Jia, Y. Hotta, K. Sato and K. Watari, “Aqueous Dispersion and Sintering of Nano ZrO2 Powders” International Symposium on Inorganic and Environmental Materials (ISIEM), Eindhoven, The Netherlands, 2004

7. C. Duran, J. Yu, Y. Hotta, K. Sato and K. Watari, “Hydrothermal synthesis of nano ZrO2 powders” Third International Symposium on the Science of Engineering Ceramics, Osaka, Japan, 2004

8. C. Duran, Gary L. Messing, and Susan Trolier-McKinstry, “Textured Sr0.53Ba0.47Nb2O6 ceramics prepared by templated grain growth,” First International Workshop on Anisotropic Science and Technology of Materials and Devices, Osaka, Japan, 2004

9. A. Alkan, C. Duran and H. Yilmaz, “Processing and electrical properties of Pb(Yb,Nb)O3-Pb(Mg,Nb)O3-PbTiO3 ceramics” The 5th Asian Meeting on Electroceramics (AMEC-5), Bangkok, Thailand, 2006

10. C. Duran, “Textured functional ceramics prepared by templated grain growth” VII. Ceramic Congress with international participitation, Afyon Kocatepe University, Afyon, Turkey, 26-28 November 2008.

11. C. Duran, Y. Hotta, K. Sato and K. Watari, “Ball milling assisted hydrothermal synthesis of nano ZrO2 (BaTiO3) powders” Invited talk, PacRim 8 Conference on Ceramic and Glass Technology May 31 - June 5, 2009 Vancouver, British Columbia, Canada. 

12. C. Duran, M. Sopicka-Lizer, H. Gocmez, T. Pawlik, M. Mikuskiewicz and K. MacKenzie “Effect of high energy milling on the formation and properties of sialon ceramics prepared from silicon nitride-aluminium nitride precursors”, Invited talk, The 3rd International Congress on Ceramics (ICC3), Nov.14-18, 2009 Osaka, Japan.

13. Hasan ÇİTÇİ and Cihangir DURAN “National Sonar Wet-End System Industrialization Project, Lessons Learned” 5th Naval System Seminar with international participation, METU, October 8-9 2012, Ankara, Turkey

14. İstek TATAR, Ahmet Levent AVŞAR, Cem ORHUN and Cihangir DURAN “Determination of piezoelectric material properties for transducer applications” 5th Naval System Seminar with international participation, METU, October 8-9 2012, Ankara, Turkey

15. Ahmet Levent Avşar, Murat Şansal ve Cihangir Duran “Low-frequency Transducer Design and Characterization” 5th Naval System Seminar with international participation, METU, October 8-9 2012, Ankara, Turkey

16. Cihangir Duran, Erdem Akça, İstek Tatar and Hasan Göçmez, “Fabrication and characterization of (Pb(Mg1/3Nb2/3)O3, Pb(Yb1/2Nb1/2)O3, PbTiO3) ternary system ceramics” The 8th Asian Meeting on Electroceramics, Pattaya, Thailand, December 2012

17. C. Duran, “Processing-property relationship in technical ceramics: Texturing structural (mullite/ZrO2) and ferroelectric (Sr0.53Ba0.47Nb2O6, KSr2Nb5O15) ceramics, Bottom-up particle synthesis and colloidal dispersion of nano powders (ZrO2 and BaTiO3), Top-down nano particle synthesis by high energy milling (Si3N4-based)”

  • Toyota Central R&D Laboratory, Nagoya, Japan, 2006

  • Silesian University of Technology, Katowice, Poland, 2007

  • TOBB-Economy and Technology University, Ankara, Turkey, 2012

  • Yıldırım Beyazıt University, Ankara, Turkey, 2013

  • NASA Glenn Research Center, Ceramics Branch, Cleveland, OH, USA, 2014

18. Cihangir Duran, Cem H. Orhun, İstek Tatar and Erdem Akça, “Pb(Mg1/3Nb2/3)O3-Pb(Yb1/2Nb1/2)O3-PbTiO3 Ternary System: Processing, Properties and Transducer Application”, 2015 Joint IEEE International Symposium on Applications of Ferroelectric (ISAF) – International Symposium on Integrated Functionalities (ISIF) – Piezoresponse Force Microscopy Workshop (PFM) Conference, 24-27 May 2015, Singapore

CERTİFİCATES:

1. Fundamentals of Sonar Transducer Design, ATI Course, September 2009, Marryland, USA

2. Underwater Acoustic Calibration and Measurement, National Physical Laboratory, April 2010, London, UK


SCHOLARSHIPS AND AWARDS:

1. Scholarship from Higher Educational Council of Turkey towards a PhD degree in the USA (1995).

2. Best poster in Particulate Materials Center Industry Advisory Board poster contest, Pennsylvania State University, USA (1999).

3. National Science Foundation (NSF) scholarship to attend Gordon Research Conference, New Hampshire, USA (2000).

4. IEEE scholarship to attend 12th IEEE International Symposium on the Applications of Ferroelectrics (ISAF), Hawaii, USA (2000).

5. 3rd place in American Ceramic Society Ceramographic Contest, 102nd American Ceramic Society Meeting, St. Louis, Missouri, USA, April 30-May 3 (2000).

6. Scholarship from Turkish Scientific and Technological research Council of Turkey to attend The 5th Asian Meeting on Electroceramics, Bangkok, Thailand, 2006

7. Gebze Institute of Technology, Research Promotion Award, 2009

8. Gebze Institute of Technology, Best M.Sc. Thesis Award with Erdem Akça, 2010

9. Scholarship from Higher Educational Council of Turkey for visiting NASA Glenn Research Center-Ceramics Branch, Cleveland, USA, June - September 2014.

REFERENCES:

  • Prof. Dr. Gary Messing

Pennsylvania State University (USA)

Materials Science and Engineering Department

Phone: (814) 8652262

E-mail: messing@matse.psu.edu




  • Prof. Dr. Susan Trolier-McKinstry

Pennsylvania State University (USA)

Materials Science and Engineering Department

Phone: (814) 863 8348

E-mail: STMcKinstry@psu.edu




  • Dr. Koji Watari

National Institute of Advanced Industrial Science and Technology (AIST), Advanced Sintering Technology Group (Japan)

E-mail: Watari1655@aol.com




  • Prof. Dr. Şerafettin Eroğlu;

Istanbul University (Turkey)

Metallurgy and Materials Science Department

Phone: (212) 4737065

E-mail: seref@istanbul.edu.tr




  • Selçuk Alparslan, Deputy General Manager

Meteksan Savunma Sanayii A.Ş. (Turkey)

Beytepe Koyu yolu, Cyberpark F Block, Bilkent/ Ankara



Phone: (312) 2661520

E-mail: salparslan@meteksan.com

Download 97.65 Kb.

Share with your friends:




The database is protected by copyright ©ininet.org 2020
send message

    Main page