Curriculum vitae name : Dr. A. K. M. Mohiuddin



Download 116.78 Kb.
Date19.10.2016
Size116.78 Kb.
#4906
CURRICULUM VITAE
1. Name : Dr. A.K.M. Mohiuddin

2. Father's Name : Mr. Md. Yahya

3. Present Address : Professor,

Kulliyyah of Engineering

Dept. of Mech. Engg.,

International Islamic University Malaysia

Jln. Gombak, 53100 Kuala Lumpur

Malaysia.

4. Mailing Address : 282-17-05 Condo Heritage, Jln. Pahang,

53000 Kuala Lumpur, Malaysia.

Telephone No. 603-61964437 (Off)

603-40225966 (Res)

6012-3168454 (Mobile)

5. e-mail Address :

6. Date & Place of Birth : 31-3-54, Lakshmipur, Bangladesh

7. Nationality : Bangladeshi

8. Marital Status : Married & got two sons.
Academic Qualification

Exam./ Degree

Year

Board/

University

Major

Academic

Standing etc.

Ph.D*

Thesis submitted in March '93,

Degree awarded in May 1994

Indian Institute of Technology (IIT), Kanpur, India

Mech. Engg. (Thermal Stream)

Percentage of marks in the course work 94.1%

MBA**

1985-'88

Institute of Business Administration, University of Dhaka, Bangladesh

Qualitative Business Analysis (QBA)

First Class


M.Sc.+ (Integrated Program)

1972-'78

Peoples Friendship University, Moscow, U.S.S.R.

Mech.Engg. (Internal CombustionEngines)

First Class with Honours



Thesis Titles
* Ph.D. : Expert System for the Thermal Design of Wet Cooling Towers

Including Database from Experiments.

** MBA : Analysis of Admission System of BIT Dhaka, Bangladesh.

+ M.Sc. : Design of a Diesel Engine for a Tractor of 30 kN.


PROFESSIONAL EXPERIENCE

Dates

Position

Employer

Nature of Duties

Nov. ’06 – to date

Professor

Mechanical Engg.

International Islamic University Malaysia

Teaching and Research


Jan. ’01 – Nov. ‘06

Associate Professor

Mechanical Engg.

International Islamic University Malaysia

Teaching and Research


Dec. ’96 – March ‘04

Professor

Mechanical Engg.

Dhaka University of Engineering & Technology

Teaching, Research and Consultancy

June ’94 – Dce.’96

Associate Professor Mechanical Engg.


Dhaka University of Engineering & Technology

Teaching, Research and Consultancy

Dec. ’92 – Dec. ‘00

Head, Dept. of Mechanical Engg.

Dhaka University of Engineering & Technology

Responsible for overall activities of the Deptt.

Jan. ’86-June ’94

Asstt. Professor

Mechanical Engg.

Dhaka University of Engineering & Technology

Teaching, Research and Consultancy

April ’85

-Jan. '86

Project Manager

The Bengal Electric Ltd. Dhaka (Sub-contractor of GEC Gas Turbine Services Ltd., England)

Civil, Mechanical and Electrical works of 60 MW Gas Turbine Project Ashugang, Bangladesh

Jan. ’84- March '85

Managing Partner

The Mechanical and Industrial Engineers, Dhaka, Bangladesh

Manufacturing of spare parts for Jute Industries of Bangladesh

Oct. ’80- Dec. ’83

Engineer-in-Charge

Agri-Engg. Ltd., Dhaka, Bangladesh

Manufacturing of machinery and spare parts

April ’80 Sept., '80

Project-in-Charge

The New Engg. (Int.) Co. (Sub-Contractor of Rosse -tti & Saver spa, Italy)

Thermal insulation and painting works of Basrah Lube Oil plant, Iraq .

Sept. ’78 March '80

Mechanical Engineer.

Bangladesh Diesel Plant (An Enterprise of BSEC), Gazipur

Incharge of Assembly & Testing Section.

PUBLICATIONS
JOURNAL


  1. Ataur, R., A.K.M. Mohiuddin, and Faris, I., 2009. Design and development of hybrid full-tracked air-cushion vehicle on swamp peat terrain in Malaysia, Journal of Terramechanics, Elsevier Science, (Accepted).




  1. Ataur, R. Mohiuddin, A.K.M. and Azmi Y. 2008. Integrated Mathematical Model for the Traction Mechanics of Hybrid Electrical Air-cushion Tracked Vehicle for Swamp Peat in Malaysia. Reviewed and resubmitted. Accepted to be published in International Journal of Heavy Vehicle System.




  1. Rahman, A., Mohiuddin, A.K.M., Altab, H. and Yahya, A., ‘Hybrid Electrical Air-Cushion Tracked Vehicle for Swamp Peat in Malaysia’, The Open Mechanical Engineering Journal, Bentham Publication. Accepted in November 2008. Publishing year 2009. Vol.4, No. xxx, pp.xxx. In press.




  1. Rahman, A., Mohiuddin, A.K.M. and Yahya, A., ‘Tracked Vehicle for Low Bearing Capacity Peat in Malaysia’, Journal of Terramechanics, (2009) Elsevier Publication, Accepted in December 2008. Publishing year 2009. Vol.46 no. xxx, pp.xxx. In Press.




  1. Rahman, A., Mohiuddin, A.K.M. and Yahya, A., (2009) ‘Kinematics Model for the Wheeled Vehicle Tractive Performance Determination on Sepang Peat Terrain in Malaysia’, Int. J. Heavy Vehicle Systems, Vol. 16, Nos. 1/2, pp. 225-242, Inderscience Publisher.




  1. Rahman, A., Yahya, A. and Mohiuddin, A.K.M., (2008) “Tractive Performance of LGP-30 Wheeled Vehicle During Straight Motion on Sepang Peat Terrain in Malaysia”, The Open Transportation Journal, Bentham Publisher, Vol.2, pp.105-117.




  1. Mohiuddin, A.K.M., A. Rahman, A. Arfah and M.A. Farraen, “Investigation and Probable solution of Low End Torque Dip Problem of CAMPRO 1.6L Engine”, International J. of Mechanical and Materials Engineering (IJMME), Vol. 3 (2008), No. 2, pp. 176-186.




  1. Mohiuddin, A.K.M., Ideres, M.R. and Hashim, S.M., “Experimental Analysis of Noise and Back Pressure for Muffler Design”, Jurnal Kejuruteraan, Vol. 20 (2008), pp.151-161.



  1. Mohiuddin, A.K.M., Ataur, R., and Asral F., “Design and Development of Valve Train System for Gasoline Engine Using GT-Suite Software”, International J. of Mechanical and Materials Engineering (IJMME), Vol. 3 (2008), No. 1, pp. 80-89.




  1. Mohiuddin, A.K.M., Saidur, R., Sattar MA., and Ataur, R., “comparison of Drift Eliminators Characteristics in Evaporative Condenser and Spray Filled Tower”, International Energy Journal, Vol. 8 (2007), pp. 155-161.




  1. Mohiuddin, A.K.M., Ataur, R. and Yazid, G., “Simulation and Experimental Investigation of Muffler Performance”, International J. of Mechanical and Materials Engineering (IJMME), Vol. 2 (2007), No. 2, pp. 118-124.




  1. Ataur, R., Mohiuddin, A.K.M., and Hossain, A., “Effectiveness of the Developed Instrumentation System on the Vehicle Performance Measurement”, International J. of Mechanical and Materials Engineering (IJMME), Vol. 2 (2007), No. 2, pp. 189-199.




  1. Rahman, A., Yahya, A. and Mohiuddin, A.K.M.,“Mobility Investigation of a Designed and Developed Segmented Rubber Track Vehicle on Sepang Peat Terrain in Malaysia”, J. Automobile Engineering, Proc. IMechE Vol.221 (2007), pp. 789-800.




  1. Mohiuddin, A.K.M. and Nurhafez, M., “Experimental Analysis and Comparison of Performance Characteristics of Catalytic Converters Including Simulation”, International J. of Mechanical and Materials Engineering (IJMME), Vol. 2 (2007), No. 1, pp. 1-7.




  1. Mohiuddin, A.K.M., Ataur, R. and and Dzaidin, M., “Optimal Design of Automobile Exhaust System Using GT-Power”, International J. of Mechanical and Materials Engineering (IJMME), Vol. 2 (2007), No. 1, pp. 40-47.




  1. Saidur R, Hasanuzzaman M, Sattar MA, Masjuki HH, Irfan Anjum M and Mohiuddin, A.K.M., An Analysis of Energy Use, Energy Intensity and Emissions at the Iindustrial Sector of Malaysia, International J. of Mechanical and Materials Engineering (IJMME), Vol. 2 (2007), No. 1, pp. 84-92.




  1. Mohiuddin, A.K.M., Ideres, M.R. and Hashim, S.M., “Experimental Study of Noise and Back Pressure for Silencer Design Characteristics”, Journal of Applied Sciences 5(7): 1292-1298, 2005.




  1. Ahmed, S. and Mohiuddin, A.K.M., “The Successful Implementation of TPM in Conjunction with EOM and 5S: A Case Presentation”, Journal of Applied Sciences 5(5): 938-951, 2005.




  1. Mohiuddin, A.K.M., “Experimental Study in a Spray Filled Tower for Flow Visualization and Drift Eliminators Characteristics”, Journal of Applied Sciences 5(2): 284-291, 2005.




  1. Mohiuddin, A.K.M. and Quik, W.H., “Collaborative Technologies in New Factory Certification Process”, Journal of Applied Sciences 5(2): 267-272, 2005.




  1. Mohiuddin, A.K.M. and Kant, K., "Optimal Thermal Design of Wet Cooling Towers", Journal of the Institution of Engineers, Singapore, Vol. 37, No. 6, 1997, pp. 31-34.



  1. Mohiuddin, A.K.M., Kant, K. and Sangal, R., "ESTOWER : Expert System for the Thermal Design of Wet Cooling Towers", J. of Engineering Applications of Artificial Intelligence, Vol. 9, No. 2, 1996, pp. 185-194, Elsevier Science Ltd., (Pergamon).




  1. Mohiuddin, A.K.M. and Kant, K., "Knowledge Base for the Systematic Design of Wet Cooling Towers - Part I : Selection and Tower Characteristic", Int. J. of Refrigeration, Vol. 19, No. 1, 1996, pp. 43 - 51, Elsevier Science Ltd.




  1. Mohiuddin, A.K.M. and Kant, K., "Knowledge Base for the Systematic Design of Wet Cooling Towers - Part II : Fill and Other Design parameters", Int. J. of Refrigeration, Vol. 19, No. 1, 1996, pp. 52 - 60, Elsevier Science Ltd.




  1. Singh, A.K., Mohiuddin, A.K.M. and Kant, K., "Characteristics of Drift Eliminators of an Evaporative Condenser", Journal of Energy, Heat and Mass Transfer, Vol. 15, 1993, pp. 331 - 337.




  1. Mohiuddin, A.K.M. and Kant, K., "Cooling Tower - An Energy Conservation Resource", Journal of the Institution of Engineers, Bangladesh, Vol. 20, No. 1-2, 1992, pp. 63 - 68.




  1. Mohiuddin, A.K.M., Kant, K. and Sen, S., "An Experimental Study on Packing and Drift Eliminators in an Evaporative Condenser with Induced Draft", Indian Journal of Technology, Vol. 30, October 1992, pp. 507 - 511.




  1. Mohiuddin, A.K.M. and Kant, K., "Analysis of Mechanical Draft wet Cooling Towers", Journal of Energy, Heat and Mass Transfer, Vol. 13, 1991, pp. 165 - 187.


CONFERENCE


  1. Mohiuddin, A.K.M. and A. Rahman, “Investigation of the Swirl Effect on CAMPRO 1.6L Engine Using GT-SUITE”, Proceedings of the National Tribology Conference 2009, 4 – 5 May, 2009, Kuala Lumpur, Malaysia, Paper No. NTC-2009-029, pp. 144-148.




  1. Mohiuddin, A.K.M., A. Rahman, A. Arfah and M.A. Farraen, “Probable solution of Torque Dip Problem of CAMPRO 1.6L Engine”, Proceedings of the 4th BSME – ASME International Conference on Thermal Engineering, 27 – 29 December, 2008, Dhaka, Bangladesh, Paper No. 129.




  1. Hossain, A., Rahman, A. Mohiuddin, A.K.M., Iqbal, A.K.M.P. and Arifin, M. “Modeling of the Developed Flexible Skirt Air-Cushion Track Vehicle Model”, Proceedings of the 4th BSME – ASME International Conference on Thermal Engineering, 27 – 29 December, 2008, Dhaka, Bangladesh, Paper No. 097.




  1. Rahman, A., Hossain, A. and Mohiuddin, A.K.M., “Integrated Mechanics for Design of the Hybrid Electrical Air-Cushion Track Vehicle for Swamp Peat”, Proceedings of the 4th BSME – ASME International Conference on Thermal Engineering, 27 – 29 December, 2008, Dhaka, Bangladesh, Paper No. 103.




  1. Ataur, R., Mohiuddin, A.K.M., Irwan, Idly and Azoa, “Design and development of an automatic car door opening and locking system”, Proceedings of the 3rd International Conference on Mechatronics,ICOM ’08, 10-12 December, 2008, Kuala Lumpur, Malaysia, pp. 10-14.




  1. Ataur, R., Mohiuddin, A.K.M. and Yahya, A., “Hybrid Electrical Air-Cushion Tracked Vehicle for Swamp Peat in Malaysia”, Proceedings of the World Automotive Congress (FISITA 2008), 14-19 September, 2008, Munich, Germany, Paper No. F2008-05-106.




  1. Mohiuddin, A.K.M., A.A.I.S. Ashour and Y.H. Shin, “Design Optimization of Valve Timing at Various Engine Speeds using Multi-Objective Genetic Algorithm (MOGA)”, Proceedings of the 19th IASTED International Conference on MODELLING & SIMULATION (MS 2008), May 26 – 28, 2008 Quebec city, Quebec, Canada, pp 41-46.




  1. Mohiuddin, A.K.M., A. Rahman, A. Arfah and M.A. Farraen, “Investigation of Low End Torque Dip Problem of CAMPRO 1.6L Engine”, Proceedings of the 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME-13), 27 - 29 May, 2008, Cairo, Egypt, AE-3-43.




  1. Mohiuddin, A.K.M., Ataur, R. and Yazid, G., “Experimental Investigation and Simulation of Muffler Performance”, Proceedings of the International Conference on Mechanical Engineering (ICME 2007), 29 – 31 December, 2007, Dhaka, Bangladesh, ICME07–TH-27.




  1. Ataur, R., Mohiuddin, A.K.M., Hossain, A., Nursyifa, S., Nora, A., Hidayah, N. and Eshah, J., “A ¼ Scale Hybrid Full-Tracked Air-Cushion Vehicle for Swamp Peat Terrain in Malaysia”, Proceedings of the International Conference on Mechanical Engineering (ICME 2007), 29 – 31 December, 2007, Dhaka, Bangladesh, ICME07–FL-25.




  1. Ataur, R., Mohiuddin, A.K.M., Hossain, A., Noraini and Irwan, “Mobility of the LGP-30 Wheeled Vehicle on Peat Terrain in Malaysia”, Proceedings of the International Conference on Mechanical Engineering (ICME 2007), 29 – 31 December, 2007, Dhaka, Bangladesh, ICME07–AM-60.




  1. Sattar, MA., Saidur, R., Masjuki, HH. and Mohiuddin, A.K.M., “Energy and Thermodynamic Performance of Refrigerator Using Pure Hydrocarbon and Mixture of Hydrocarbons as Refrigerants”, Proceedings of the International Conference on Mechanical Engineering (ICME 2007), 29 – 31 December, 2007, Dhaka, Bangladesh, ICME07–TH-35.




  1. Mohiuddin, A.K.M., Ataur, R. and Asral Fikri, “Design and Development of Valve Train System for Terrain Vehicle Engine Using GT-SUITE Software”, Proceedings of the Joint North America, Asia-Pasific ISTVS Conference and Annual Meeting of Japanese Society for Terramechanics (ICTVS 2007), 23 – 26 June, 2007, Fairbanks, Alaska, USA, PI-041.




  1. Mohiuddin, A.K.M. and Dzaidin, M., “Design and Development of Automobile Exhaust System Using GT-Power”, Proceedings of the 3rd BSME – ASME International Conference on Thermal Engineering, 20 – 22 December, 2006, Dhaka, Bangladesh, BA – 128.




  1. Mohiuddin, A.K.M. and Quik, W.H., “Facility and Maintenance Engineering for New Factory’s Certification Process”, Proceedings of the1st International Conference & 7th AUN/SEED-Net Fieldwise Seminar on Manufacturing and Materials Processing (ICMM2006), 14 – 15 March 2006, Kuala Lumpur, Malaysia, pp 665 – 670.




  1. Mohiuddin, A.K.M. and Nurhafez, M., “Analysis and Comparison of Performance Characteristics of Catalytic Converters”, Proceedings of 6th International Conference on Mechanical Engineering (ICME2005), Paper No. ICME05-TH-38, 28-30 December 2005, Dhaka, Bangladesh.




  1. Mohiuddin, A.K.M. and Nurhafez, M., “Experimental Investigation and Simulation of Catalytic Converter Performance”, Proceedings of 4th International Conference on Heat Transfer, Fluid mechanics and Thermodynamics (HEFAT2005), Paper No. MA2, 19-22 September 2005, Cairo, Egypt.




  1. Mohiuddin, A.K.M., Ideres, M.R. and Hashim, S.M., “Experimental Analysis of Noise and Back Pressure for Muffler Design”, Proceedings of the Advance in Malaysian Noise, Vibration and Comfort (NVC 2005), 17-18 May, 2005, Bangi, Malaysia, pp. 11- 22.




  1. Mohiuddin, A.K.M., Ideres, M.R. and Hashim, S.M., “Muffler Design Optimization through Experimental Analysis of Noise and Back Pressure”, Proceedings of the 2nd International Conference on Mechatronics, ICOM’05, 10-12 May, 2005, Kuala Lumpur, Malaysia, Vol. 2, pp. 685-692.



  1. Mohiuddin, A.K.M. and Quik, W.H., “New Factory's Certification Process – Use of Collaborative Technologies as a Tool”, Proceedings of the 4th International Mechanical Engineering Conference (IMEC-2004) & 9th Annual Paper Meet (APM), 29-31 December, 2004, Dhaka, Bangladesh, pp. 296-302.




  1. Mohiuddin, A.K.M. and Quik, W.H., “Accelerated New Factory Certification using CE Methodology”, Proceedings of the 2nd International Industrial Engineering Conference (IIEC-2004), December 19-21, 2004, Riyadh, Kingdom of Saudi Arabia.




  1. Mohiuddin, A.K.M., “Experimental Study of Drift Eliminators in a Spray Filled Tower” Proceedings of 3rd International Conference on Heat Transfer, Fluid mechanics and Thermodynamics (HEFAT2004), Paper No. MA1, 21-24 June 2004, Cape Town, South Africa.




  1. Mohiuddin, A.K.M. and Quik, W.H., “Establishing New Factory with Technology Certification Roadmap”, Proceedings of the 3rd International Conference on Advanced Manufacturing Technology (ICAMT2004), Paper No. G3_ 273, 11-13 May 2004, Kuala Lumpur, Malaysia, pp 530-534.




  1. Mohiuddin, A.K.M., “Artificial Intelligence – A Tool for Thermal Design of Cooling Towers”, Proceedings of 2nd International Conference on Heat Transfer, Fluid mechanics and Thermodynamics (HEFAT2003), Paper No. MA5, June 23-26, 2003, Victoria Falls, Zambia.




  1. Mohiuddin, A.K.M., “Expert System for the Thermal Design of Absorption Chiller”, Proceedings of the 3rd International Conference of Mechanical Engineering (ICME) and 8th Annual Paper Meet(APM), March 20-22, 2003, Institution of Engineers Bangladesh, Dhaka, Bangladesh.




  1. Mohiuddin, A.K.M., “Expert System for the Thermal Design of Mechanical Devices”, Proceedings of IEEE 7th International Conference on Intelligent Engineering Systems, March 4-6, 2003, Assiut – Luxor, Egypt, pp 568-571.




  1. Mohiuddin, A.K.M., “Solar Energy Management for Poverty Alleviation and Income Generating Activities in Rural Areas”, Proceedings of International Conference on Manufacturing (ICM 2002), Vol.2, August 09-11, 2002, Dhaka, Bangladesh, pp 480-485.




  1. Mohiuddin, A.K.M., “An Experimental Study on Spray Filled Tower”, Proceedings of BSME-ASME International Conference on Thermal Engineering, 31st Dec. 2001- 2nd Jan 2002, Dhaka, Bangladesh, pp 393-402.




  1. Mohiuddin, A.K.M., "Solar Energy Utilization Scenario in Bangladesh", Proceedings of the National Seminar on Coastal Environment and Energy resources in Bangladesh, Dec 8-9, 1998, Khulna, Bangladesh.




  1. Islam, M.S., Monde, M., Hino, R., Huq, A.M.A. and Mohiuddin, A.K.M., "Heat Transfer Augmentation in Rib-Roughened Narrow Channels with One-Sided Heating", Proceedings, Second International Seminar on Fluid Mechanics and Heat Transfer, Dec. 17-18, 1997, Dhaka, Bangladesh, pp. 143-150.




  1. Kant, K and Mohiuddin, A.K.M., "Thermal Design of Wet Cooling Towers", Proc. of the Summer School on New Trends in Refrigeration, IIT Kanpur, India, June 17-30, 1996, pp. 37-62.




  1. Mohiuddin, A.K.M., "Energy Conservation through Optimal Design of Cooling Towers", Proceedings Third Annual Paper Meet, The Institution of Engineers, Bangladesh, Mech. Engg. Division, 31 Oct-2 Nov., 1996, Paper No. 4, pp. 28-37.



Under Review:


    1. Ataur, R. Azmi Yahya and A.K.M. Mohiuddin. 2008. Design and development of hybrid full-tracked air-cushion vehicle on swamp peat terrain in Malaysia. Under Review, Journal of Terramechanics, Elsevier Science.




    1. Ataur, R, Mohiuddin, A.K.M, Hossain, A, Noraini And Irwan. 2008. Mobility of the LPG-30 wheeled vehicle on peat terrain in Malaysia: Theoretical and Field investigation. Under Review, Journal of American Society of Mechanical Engineers.


3. Ataur, R, Mohiuddin, A.K.M, Nursyifa, S, Nora, N, Hidayah, N, and Jamiatul, E. 2008. Integrated Mechanics for the Design of hybrid electrical tracked air-cushion vehicle for swamp peat in Malaysia. Under Review, International Journal of heavy vehicle system.

      1. Ataur, R. Mohiuddin, A.K.M. Irwan, Idly and Azoa . 2008. Design and development of passenger car door locking system. Under Review, International Journal of vehicle Design, Inderscience Publisher.

      2. Ataur, R. Mohiuddin, A.K.M. Iuar, M and Zaimi, Z. 2008. Design and development of Electromechanical Actuated CVT for passenger car. Under Review, International Journal of vehicle Design, Inderscience Publisher.




      1. Ataur, R, Mohiuddin, A.K.M, Nursyifa, S, Nora, N, Hidayah, N, and Jamiatul, E. 2008. Design and development of Hybrid air-cushion tracked vehicle for swamp peat Terrain in Malaysia. Under review, Journal of Terramechanics.



TECHNICAL REPORTS

1. "Modelling of Mechanical Draft Wet Cooling Towers", A.K.M. Mohiuddin and Keshav Kant, IITK/ME/FTS - 93004, Deptt. of Mech. Engg., IIT, Kanpur, India.


2. "Characteristics of Drift Eliminators of an Evaporative Condenser", A.K. Singh, A.K.M. Mohiuddin and Keshav Kant, IITK/ME/FTS - 94003, Deptt. of Mech. Engg., IIT, Kanpur, India.
3. "ESTOWER : Expert System for the Thermal Design of Wet Cooling Towers", A.K.M. Mohiuddin, Keshav Kant and Rajeev Sangal, IITK/ME/FTS - 94016, Deptt. of Mech. Engg. IIT, Kanpur, India.
PRESENTATIONS
Mohiuddin, A.K.M., A. Rahman, A. Arfah and M.A. Farraen, “Probable solution of Torque Dip Problem of CAMPRO 1.6L Engine”, Proceedings of the 4th BSME – ASME International Conference on Thermal Engineering, 27 – 29 December, 2008, Dhaka, Bangladesh, Paper No. 129.
Mohiuddin, A.K.M., A.A.I.S. Ashour and Y.H. Shin, “Design Optimization of Valve Timing at Various Engine Speeds using Multi-Objective Genetic Algorithm (MOGA)”, Proceedings of the 19th IASTED International Conference on MODELLING & SIMULATION (MS 2008), May 26 – 28, 2008 Quebec city, Quebec, Canada, pp 41-46.
Mohiuddin, A.K.M., Ataur, R. and Yazid, G., “Experimental Investigation and Simulation of Muffler Performance”, Proceedings of the International Conference on Mechanical Engineering (ICME 2007), 29 – 31 December, 2007, Dhaka, Bangladesh, ICME07–TH-27.
Mohiuddin, A.K.M. and Dzaidin, M., “Design and Development of Automobile Exhaust System Using GT-Power”, Proceedings of the 3rd BSME – ASME International Conference on Thermal Engineering, 20 – 22 December, 2006, Dhaka, Bangladesh, BA – 128.
Mohiuddin, A.K.M. and Quik, W.H., “Facility and Maintenance Engineering for New Factory’s Certification Process”, Proceedings of the1st International Conference & 7th AUN/SEED-Net Fieldwise Seminar on Manufacturing and Materials Processing (ICMM2006), 14 – 15 March 2006, Kuala Lumpur, Malaysia, pp 665 – 670.
Mohiuddin, A.K.M. and Nurhafez, M., “Analysis and Comparison of Performance Characteristics of Catalytic Converters”, Proceedings of 6th International Conference on Mechanical Engineering (ICME2005), Paper No. ICME05-TH-38, 28-30 December 2005, Dhaka, Bangladesh.
Mohiuddin, A.K.M. and Nurhafez, M., “Experimental Investigation and Simulation of Catalytic Converter Performance”, Proceedings of 4th International Conference on Heat Transfer, Fluid mechanics and Thermodynamics (HEFAT2005), Paper No. MA2, 19-22 September 2005, Cairo, Egypt.
Mohiuddin, A.K.M., Ideres, M.R. and Hashim, S.M., “Experimental Analysis of Noise and Back Pressure for Muffler Design”, Proceedings of the Advance in Malaysian Noise, Vibration and Comfort (NVC 2005), 17-18 May, 2005, Bangi, Malaysia, pp. 11- 22.
Mohiuddin, A.K.M., Ideres, M.R. and Hashim, S.M., “Muffler Design Optimization through Experimental Analysis of Noise and Back Pressure”, Proceedings of the 2nd International Conference on Mechatronics, ICOM’05, 10-12 May, 2005, Kuala Lumpur, Malaysia, Vol. 2, pp. 685-692.

Mohiuddin, A.K.M. and Quik, W.H., “New Factory's Certification Process – Use of Collaborative Technologies as a Tool”, Proceedings of the 4th International Mechanical Engineering Conference (IMEC-2004) & 9th Annual Paper Meet (APM), 29-31 December, 2004, Dhaka, Bangladesh, pp. 296-302.
Mohiuddin, A.K.M. and Quik, W.H., “Accelerated New Factory Certification using CE Methodology”, Proceedings of the 2nd International Industrial Engineering Conference (IIEC-2004), December 19-21, 2004, Riyadh, Kingdom of Saudi Arabia.
Mohiuddin, A.K.M., “Experimental Study of Drift Eliminators in a Spray Filled Tower” Proceedings of 3rd International Conference on Heat Transfer, Fluid mechanics and Thermodynamics (HEFAT2004), Paper No. MA1, 21-24 June 2004, Cape Town, South Africa.
Mohiuddin, A.K.M. and Quik, W.H., “Establishing New Factory with Technology Certification Roadmap”, Proceedings of the 3rd International Conference on Advanced Manufacturing Technology (ICAMT2004), Paper No. G3_ 273, 11-13 May 2004, Kuala Lumpur, Malaysia, pp 530-534.
Mohiuddin, A.K.M., “Artificial Intelligence – A Tool for Thermal Design of Cooling Towers”, Proceedings of 2nd International Conference on Heat Transfer, Fluid mechanics and Thermodynamics (HEFAT2003), Paper No. MA5, June 23-26, 2003, Victoria Falls, Zambia.
Mohiuddin, A.K.M., “Expert System for the Thermal Design of Absorption Chiller”, Proceedings of the 3rd International Conference of Mechanical Engineering (ICME) and 8th Annual Paper Meet(APM), March 20-22, 2003, Institution of Engineers Bangladesh, Dhaka, Bangladesh.
Mohiuddin, A.K.M., “Expert System for the Thermal Design of Mechanical Devices”, Proceedings of IEEE 7th International Conference on Intelligent Engineering Systems, March 4-6, 2003, Assiut – Luxor, Egypt, pp 568-571.
Mohiuddin, A.K.M., “Solar Energy Management for Poverty Alleviation and Income Generating Activities in Rural Areas”, Proceedings of International Conference on Manufacturing (ICM 2002), Vol.2, August 09-11, 2002, Dhaka, Bangladesh, pp 480-485.
Mohiuddin, A.K.M., “An Experimental Study on Spray Filled Tower”, Proceedings of BSME-ASME International Conference on Thermal Engineering, 31st Dec. 2001- 2nd Jan 2002, Dhaka, Bangladesh, pp 393-402.
Mohiuddin, A.K.M., "Solar Energy Utilization Scenario in Bangladesh", Proceedings of the National Seminar on Coastal Environment and Energy resources in Bangladesh, Dec 8-9, 1998.
Islam, M.S., Monde, M., Hino, R., Huq, A.M.A. and Mohiuddin, A.K.M., "Heat Transfer Augmentation in Rib-Roughened Narrow Channels with One-Sided Heating", Proceedings, Second International Seminar on Fluid Mechanics and Heat Transfer, Dec. 17-18, 1997, Dhaka, Bangladesh, pp. 143-150.
Kant, K and Mohiuddin, A.K.M., "Thermal Design of Wet Cooling Towers", Proc. of the Summer School on New Trends in Refrigeration, IIT Kanpur, June 17-30, 1996, pp. 37-62.
Mohiuddin, A.K.M., "Energy Conservation Through Optimal Design of Cooling Towers", Proceedings Third Annual Paper Meet, The Institution of Engineers, Bangladesh, Mech. Engg. Division, 31 Oct-2 Nov., 1996, Paper No. 4, pp. 28-37.

Consultancy Works


  1. Worked with complete authority in the construction and installation work of 60MW Gas Turbine Plant in Ashugang. Developed expertise in power generation and transmission field.

  2. Worked as Advisor, Alternate Energy Division (Solar Dept.), Rahimafrooz (Bangladesh) Ltd., 104 Motijheel C/A, Dhaka, 1998-‘99.

  3. Worked as a Consultant in TPRM project (Management Training of Mid Level Managers of Retained Jute Mills) financed by World Bank under Ministry of Jute and Textiles from Nov. 23, 1995 to Nov. 22, 1997.

  4. Executed erection work of 210MW Power Plant Project in Ghorashal under The Bengal Electric Co. Ltd. in 1987.


Additional Qualification


  1. Passed the State Examination of USSR and qualified as an Interpreter from Russian into English.

  2. Fellow of the Institution of Engineers, Bangladesh, (F/2163)

  3. Fellow of Bangladesh Society of Mechanical Engineers, (F 99 005ME)

  4. Member, American Society of Mechanical Engineers (ASME), (8517476)

  5. Member of Bangladesh Computer Society, (M/390)

  6. Member of Bangladesh Environmental Society, (M/226)

  7. Member of the IBA Alumni Association, Institute of Business Administration, University of Dhaka.

  8. Passed the Examinations both in theory and practice of ’98 SHP (Small Hydro Power) Equipment Training Workshop organised by HRC at Hangzhou, the People’s Republic of China, (From 3rd June 1998 to 17th June, 1998).

  9. Successfully completed a training programme on Training of Trainers (ToT) organised by the Institution of Engineers, Bangladesh from 2nd August 1998 to 13th August 1998.

  10. Published biography as an educator, Marquis Who’s Who in the World, USA.

  11. Nominated as an International Man of the Year for 1999/2000, International Biographical Centre, Cambridge, England.


Extra Activities
a) Coordinator, Experimental and Computational Thermo-fluid Mechanics Research Group, Faculty of Engineering, IIUM, April, 2004 – till date.

b) Postgraduate Coordinator, Department of Mechanical Engineering, IIUM, July, 2006 – June, 2007.

c) Academic Advisor for Automotive Engineering, IIUM, 01-10-2003 to 30-6- 2004.

d) Member, Board of Studies: Bachelor of Engineering in Automotive Engineering Programme, IIUM.

e) Member, Board of Studies: Post Graduate Automotive Engineering Programme, IIUM.

f) Chairman, Curriculum Committee, Automotive Engineering, IIUM.

g) Participant, Curriculum Development Workshop for UNITEK MARA (British Malaysian Institute) on 10-12 June 2002.

h) Member, Departmental Recruitment and Promotion Committee, Department of Mechanical Engineering, IIUM, 2002 -’05.

i) Member, Departmental Post Graduate Committee, Department of Mechanical Engineering, IIUM, 2005-2008.

j) Member, Kulliyyah Board, Faculty of Engineering, IIUM, 2002-’04, 2006 – till date.

k) Chairman, Technical Session, 4th BSME – ASME International Conference on Thermal Engineering, 27 – 29 December, 2008, Dhaka, Bangladesh.

l) Chairman, Technical Session, 2nd International Conference on Mechatronics, ICOM’05, 10-12 May, 2005, Kuala Lumpur, Malaysia.

m) Chairman, Technical Session, 4th International Mechanical Engineering Conference (IMEC-2004) & 9th Annual Paper Meet (APM), 29-31 December, 2004, Dhaka, Bangladesh.

n) Chairman, Technical Session, 3rd International Conference on Advanced Manufacturing Technology (ICAMT2004), 11-13 May 2004, Kuala Lumpur, Malaysia.

o) Chairman, Technical Session, IEEE 7th International Conference on Intelligent Engineering Systems, March 4-6, 2003, Assiut – Luxor, Egypt.

p) Reviewer, Int. J. Heat Mass Transfer, Elsevier Science.

q) Reviewer, Journal Energy and Environment.

r) Reviewer, IIUM Engineering Journal.

s) Member, Organizing Committee, 3rd International Conference on Advanced Manufacturing Technology (ICAMT2004), 11-13 May 2004, Kuala Lumpur, Malaysia.

t) Member, Board of Governors, 1998-2000, BIT, Dhaka.

u) Member, Academic Council, 1986- 2000, BIT, Dhaka.

v) Member, Advisory Committee, 1992- 2000, BIT, Dhaka.

w) Chairman, Computer Center, 1997-2000, BIT, Dhaka.

x) Member, Executive Committee, Bangladesh Society of Mechanical Engineers, 1999-2000.



y) Vice-Chairman, Mechanical Engineering Divisional Committee, The Institution of Engineers, Bangladesh, 2000-‘01.

        1. Life Member, Anjumane Hedaetul Ummat – a philanthropic organization.



AWARDS

1. RESEARCH AWARD

    1. SILVER Medal

  • Organizer: KERIE 2007

  • Title of the Project: “Development of Hybrid Engine Model”.

  • Researchers: Prof. Dr. A.K.M. Mohiuddin and Dr. Md. Ataur Rahman

    1. SILVER Medal

  • Organizer: KERIE 2007

  • Title of the Project: “Design and development of an Electro-mechanical Torque Transducer for the Investigation of LGP-30 Wheeled Vehicle Mobility”.

  • Researchers: Dr. Md. Ataur Rahman, Prof. Dr. A.K.M. Mohiuddin, Noraini binti Mat, Md. Irwan Sifa



    1. SILVER Medal

  • Organizer: KERIE 2008

  • Title of the Project: “Electromagnetic Actuated CVT System for Vehicle”.

  • Researchers: Dr. Md. Ataur Rahman, Prof. Dr. A.K.M. Mohiuddin, Faradillah, Suryha.

2. Scholarship of the Soviet Government to pursue Integrated Masters Program (1972 – 1978)
3. Scholarship of Indian Government (ICCR) to pursue Ph. D. Program (1989 – 1992).
SUPERVISION OF Ph.D. STUDENTS
Adeyemi, Nabeel Adedapo, “Dynamic Modeling of a Batch Bioreactor for Trans-Esterification of Vegetable Oil” (Supervisor).
Md. Altab Hossain, “Intelligent Air-Cushion System for a Swamp Peat Terrain Vehicle”, (Co-Supervisor)
SUPERVISION OF M.Sc. STUDENTS
Noor Azammi, “Study on Engine Performance and Emission Effect of an After Market Voltage Stablizer”.
Mohammad Edilan, “ Study and Analysis of Performance and Emission Control of SI Engine Using Water Injection in the Intake Manifold”.
SUPERVISED M.Sc. ENGINEERING STUDENTS
MSc. Thesis: “The Studies and Improvement of Ventilation System in the Paint Shop” by Abdul Rashid bin Mohd. Ali, June 2008.
MSc. Thesis: “Establishing a New Factory: A Technology Certification Process” by Quik Wee Hock, 2005.
MSc. Thesis: “Implementation of ISO 9000 and Malaysia Automotive Industries Suppliers Production Performance” by Fawzi Bin Ahmad, 2005.
MSc. Thesis: “A Study of ISO 9000:2000/1994 Proton Vendors Industrial Business Performance: Financial Aspect” by Ahmad Halimi Bin Kasani, 2005.
SUPERVISION OF B.Sc. ENGINEERING (FINAL YEAR) PROJECTS (At IIUM):
“Robust Design Optimization of Valve Timing at Various Engine Speeds Using Multi-Objective Genetic Algorithm (MOGA)”, by Yap Haw Shin, December, 2007.
“Design of Exhaust Muffler to Optimize Noise and Back Pressure”, by Yazid Bin Ghazali, April, 2007.

“Design and Development of Automotive Valve Train System Using GT-SUITE Software”, by Asral Fikri Bin Ahmad Asnawi, December, 2006.


“Development of Hybrid Engine Car Model – Internal Combustion Engine”, by Irman Ezzuan Ismail, December, 2006.
“Development of Hybrid Engine Car Model – Charging System”, by Ahmad Fakhzan Bin Omar, December, 2006.
“Development of Hybrid Engine Car Model – Electric Motor”, by Mohd Hazwan B Mohamed Norli, December, 2006.

“Experimental Study of Noise and Back Pressure on Muffler Design”, by Mohd Firdaus Bin Abu Bakar and Mohammad Adib Bin Bakar, April, 2006.


“Design and Development of Automobile Intake System Using GT-POWER Software”, by Rahayu Kasmu, April, 2006.
“Development of a Hybrid Car – Engine and Power Train Selection”, by Mohd Faisal Bin Ismail, April, 2006.
“Development of a Hybrid Car – Structure and Chasis”, by Norul Huda Binti Md. Rasdi, April, 2006.
“Development of a Hybrid Car – Electrical and Control Systems”, by Raziedah Binti Ahmad, April, 2006.
“Design and Development of Automobile Exhaust System Using GT-Power Software”, by Mohd Dzaidin Bin Mohd Subri, December, 2005.
“Automotive Frontal Collision Warning System”, by Mohd Izhar Bin Ahmad Mokhtar, December, 2005.
“Performance Study of a CI (Diesel) Engine with and without a Turbocharger”, by Nabilah Bt. Ramli and Azlifah Bt. Aziz, April, 2005.
“Experimental Study and Analysis on Combustion”, by Noorashikin Bt Anuar, April, 2005.
“Performance Study of a Gasoline Engine with and without Using a Turbocharger”, by Adib Bin Hasan Abrar and Muhammad Shuaib Bin Jamaludin, April, 2005.
“Comparison Study of Ceramic Monolith Catalytic Converters”, by Muhammad Nurhafez Bin Sharif, March 2005.
“Design and Analysis of Continuously Variable Transmission for Vehicles”, by Afsaridar Bin Baijuri and Khairul Affendi Bin Aminshah, November, 2004.
“Design, Analysis and Fabrication of an Automobile Muffler”, by Mohd Rashidin Ideres and Shukri Mohd Hashim, August, 2004.
“Performance Study of a Diesel Engine with and without Using a Turbocharger”, by Mohamed Aslam Bin S. Masohood, July, 2004.
“Design, Analysis and Fabrication of the Frame Structure of a Buggy Car”, by Radin Muhd Imaduddin and Mohd Zainor Azree Zakaria, April, 2004.
“Analysis of Vapour Absorption Refrigeration System Including the Design, Fabrication and Analysis of Heat Exchanger”, by Suriati Akmal and Fadhilah Mohd Zahari, February, 2003.

Examiner


      1. External Examiner, Masters Thesis, “Heat and Moisture Transfer and Energy Performance of a Refrigerator with Open and Closed Door Condition”, University Malaya, 2008.




      1. External Examiner, Masters Thesis, “Implementation of TPM in a Roof Tile Factory for Improving Plant Effectiveness”, University Malaya, 2008.




      1. Internal Examiner, Masters Thesis, “Job satisfaction and Staff Turnover: A Case Study on IKIP Education Sdn Bhd”, Kulliyyah of Engineering, IIUM, 2008.




      1. Examiner for MBA Project Paper, “A Survey of Operations Management Practices in Islamic Banks of Bangladesh”, Management Centre, IIUM, 2007.




      1. External Examiner, Masters Thesis, “Effect to Lot Size on Cycle Time for Semiconductor Back-End Manufacturing: A Simulation Approach”, University Malaya, 2006.




      1. External Examiner, Masters Thesis, “Development of Powder Metallurgical Techniques for the Production of Self-Lubricating Bearing in Tin Base Alloys”, University Malaya, 2005.




      1. Internal Examiner, Ph.D. Thesis, “Experimental and Mathematical Analysis of a Multistage Evacuated Solar Still”, Kulliyyah of Engineering, IIUM, 2004.

8. Internal Examiner, Masters Thesis,“A Study of Motivation in Business Start Ups Among Malay Entrepreneurs”, Kulliyyah of Engineering, IIUM, 2003.



Completed Research Project
IRPA Project No. 02-02-08-9623 Advanced Cycles for Absorption Chillers, (December, 2004).
Ongoing Research Projects


  1. IIUM Fundamental Research Grant (IFRG)

  1. Project Title: “Design of an Exhaust Muffler to Optimize Noise and Backpressure”

    • Year : 2008

    • Project no. : IFRG 0704-84

    • Amount : RM 15,000

    • Researchers:Prof. Dr. A.K.M. Mohiuddin and Prof. Dr. Waqar Asrar.

  2. Project Title: “Fundamental Study and Development of a Low Cost Catalytic Converter”

    • Year : 2008

    • Project no. : IFRG 0704-85

    • Amount : RM 15,000

    • esearchers:Prof. Dr. A.K.M. Mohiuddin and Prof. Dr. Ahmad Faris Ismail.

(iii) Project Title: “Study on the Traction Mechanics of a Hybrid Semi-Tracked-Wheeled vehicle for Low Bearing capacity Peat.”

  • Year : 2008

  • Project no. : IFRG 0703-69

  • Amount : RM 15,500

  • Reserachers: Dr. Md. Ataur Rahman and Prof. Dr. AKM Mohiuddin.

  1. Research Endowment (Type B)

(i) Title of the project: Investigation and Probable Solution of Low End Torque Dip Problem of 1.6L Gasoline Engine

  • Year: 2008

  • Project no. : ENDW B 0803-97

  • Amount : 20,000

  • Researcher: Prof. Dr. AKM Mohiuddin and Dr. Md. Ataur Rahman.

  1. Title of the Project: Design and development of a model on Hybrid Full-Tracked Air-cushion Electrical Vehicle for Swamp peat in Malaysia”.

  • Year : 2008

  • Project no. : ENDW B 0703-50

  • Amount : RM 10,000

  • Reserachers: Dr. Md. Ataur Rahman and Prof. Dr. AKM Mohiuddin.

  1. Title of the Project: Hydraulic actuated control metal belt pulley continuous variable transmission system for a medium scale vehicle.

      • Year : 2008

  • Project no. : ENDW B 0804-130

  • Amount : RM 20,000

  • Reserachers: Dr. Md. Ataur Rahman and Prof. Dr. AKM Mohiuddin.

  1. Research Endowment (Type A)

(i) Title: Design and fabrication of 2nd generation IIUM buggy Car.

  • Year : 2008

  • Project no. : ENDW A08-310

  • Amount : RM5000

  • Researcher: Prof. Dr. AKM Mohiuddin and Dr. Md. Ataur Rahman.



      1. Title: Design and fabrication of 2nd generation IIUM buggy Car.

  • Year : 2008

  • Project no. : ENDW A09-337

  • Amount : RM5000

  • Researcher: Dr. Kassim A. Abdullah and Prof. Dr. AKM Mohiuddin.


Courses taught in Under Graduate and Post Graduate Level:

Internal Combustion Engines, Automotive Engineering, Thermodynamics, Heat Transfer, Combustion, Advanced Internal Combustion Engines, Engineering Mechanics (Static and Dynamics), Engine Design, Fluid Mechanics, Thermo-fluid Mechanics, Power Trains, Refrigeration, Renewable Energy Resources, Organisational Behaviour, Strategic Management, Decision Science (Operations Research), Engineering Project Management, Management Information Systems (MIS), Operations Management, Quantitative Approaches to Decision Making etc.



References

1. Prof. Dr. Ahsan Ali Khan, Dept. of Manufacturing and Materials Engineering, International Islamic University Malaysia, Jalan Gombak, Kuala Lumpur – 53100, Malaysia.

2. Prof. Dr. A.K.M. Iqbal Hossain, Mechanical and Chemical Engineering Department, Islamic University of Technology (IUT), Board Bazar, Gazipur, Bangladesh.

3. Prof. Dr. S. K. Choudhury, Mechanical Engineering Department, Indian Institute of Technology (IIT), Kanpur-208016, India.


(Prof. Dr. A.K.M. Mohiuddin)
Download 116.78 Kb.

Share with your friends:



The database is protected by copyright ©ininet.org 2024
send message
    Main page
international conference
successful implementation
soviet government
national seminar
summer school