Curriculum Vitae of Peter Hodgson contact



Download 453.23 Kb.
Page6/7
Date31.07.2017
Size453.23 Kb.
#25807
1   2   3   4   5   6   7

P.D. Hodgson, “Developments in Steel to Meet Automotive Industry Needs”, 2nd National Steel Conference, Institute of Materials Engineering Australasia Ltd. 17-18 Nov. 2003

  • Y. Frayman, B.F. Rolfe, P.D. Hodgson and G.I. Webb, “Improving the prediction of the roll separating force in a hot steel finishing mill”, Intelligence in a Small Materials World, Proceedings Fourth International Conference on Intelligent Processing & Manufacturing of Materials, Sendai, Japan, (2003), pp 1-12

  • M.E. Dingle, P.D. Hodgson, and M.J. Cardew-Hall, “Optimisation of draw die structures to reduce bedding time during try-out”, Sheet Metal 2003, 14-16 April, 2003, Proceedings of 10th International Conference, United Kingdom, pp 333-340

  • Petrescu, M. Dingle and P.D. Hodgson, “Prediction of Ductile Fracture in the Cold Forging of Steel”, 6th EsaForm Conference on Metal Forming, Palermo, Italy, 26-28 April, (2003), pp 919-922

  • G.L. Kelly and P.D. Hodgson, “Surface Performance Research at Deakin University”, Heat Treatment and Surface Engineering for the Automotive Industry”, IFHTSE, Bangkok, Thailand 27-29 January (2003)

  • M.J. Cardew-Hall, M. Pantano and P.D. Hodgson, “The changing nature of University-Industry Research Alliances”, International Conference Manufacturing Excellence, Melbourne, Australia, Day 2, Session 3, October 13-15 (2003)

  • Teletovic and P.D. Hodgson, “Turbulent filling of Iron Castings”, 34th Australian Foundry Institute National Conference, October 19-23 (2003)

  • H. Beladi, A. Zarei-Hanzaki, G.L. Kelly and P.D. Hodgson, “Formation of Ultrafine Ferrite by Deformation of Austenite During Single-Pass Hot Rolling”, International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control”, ed. E.J. Palmiere, M. Mahfouf and C. Pinna, June 23-26 2002, Published by The University of Sheffield England, (2003), pp 252-256

  • P. D. Hodgson, M. Barnett, R H. Beladi and G.L. Kelly, “The Production of Ultrafine Grained Steel by Thermomechanical Processing, International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control”, June 23-26 2002, ed. E.J. Palmiere, M. Mahfouf and C. Pinna, Published by The University of Sheffield, England, (2003) pp 170-175

  • I.B Timokhina, P.D. Hodgson and E.V. Pereloma, “Effect of Alloying Elements on the Microstructure-property Relationship in Thermomechanically Processed C-Mn-Si TRIP Steels,” Proceedings of International Conference on Trip-Aided Strength Ferrous Alloys, 2002, Ghent, Belgium, pp 153-157

  • I.B. Timokhina, P.D. Hodgson, and E.V. Pereloma, “Effect of Strain and Morphology of the Bainitic Microstructure on the Retained Austenite Stability and Mechanical Properties of Thermomechanically Processed C-Mn-Si (-Nb) TRIP Steels”, Proceedings of International Conference on TRIP Aided High Strength Ferrous Alloys. Ghent, Belgium, June 19-21 (2002) pp 181-185

  • B.F. Rolfe, Y. Frayman, P.D. Hodgson, G.I. Webb and G.L. Kelly, “Fault detection in a cold forging process through feature extraction with a neural network”, Proceedings of the IASTED Conference on Artificial Intelligence and Applications, Malaga, Spain. September (2002) pp 155-159

  • P.D. Hodgson, H. Beladi and M.R. Barnett, “Grain Refinement Through Thermomechanical Processing”, Materials Science Forum, Vols. 500-501, (2005) pp 39-48

  • M.J. Cardew-Hall, J.I. Smith, V. Pantano and P.D. Hodgson, “Knowledge Capture and Feedback System for Design and Manufacture”, 2002 IBEC International Body Engineering Conference and Exhibition, Palais des Congres, Paris. July (2002) pp 1-5

  • Y. Frayman, B.F. Rolfe, P.D. Hodgson and G.I. Webb, “Predicting the Rolling Force in Hot Steel Rolling Mill using an Ensemble Model”, Proceedings of the second IASTED International Conference on Artificial Intelligence and App lications. September, Malaga, Spain.(2002) pp 143-148

  • D.A. Haynes, P.D. Hodgson, “Influence of Galvanneal Coating Structure on Press Formability”, 44th Mechanical Working and Steel Processing Conference. International Symposium on Zinc-Coated Steels: Processing, Structure and Properties, 8-11 September 2002, Orlando, Fla, USA

  • G.L. Kelly, H. Beladi and P.D. Hodgson, “Ultrafine Grained Steels Through Thermomechanical Processing”, Proc. Of 1st International Conference on Advanced Structural Steels (ICASS 2002) 22-24 May 2002, pp 13-14

  • V. Pantano, M.J. Cardew-Hall and P.D. Hodgson, “Technology Diffusion and Organisational Culture Preliminary Findings from the Implementation of a Knowledge Management System”, 2002 IEEE International Engineering Management Conference, Cambridge, U.K. August (2002) pp 1-6

  • M.J. Cardwell-Hall, P.D. Hodgson and N. Miller, “Leaving the Lab Behind : Australian students move stamping research to the plant”, Stamping Journal, Vol 13, No. 2, pp 26-29, FABTECH, 2001, Rockford, Illinois, USA

  • W.M. Gao, LX Kong and P.D. Hodgson, “Numerical Simulation of Heat Transfer and Temperature Fields of Workpiece in Fluidized Bed Heat Treatment Furnaces”, Engineering Materials, 23-26 September (2001), pp 25-31

  • G.L. Kelly and P.D. Hodgson, “Post-Deformation Softening and Strain-Induced Transformation” Engineering Materials 2001, ed. E. Pereloma & K. Raviprasad, The Institute of Materials Engineering, Australasia Ltd, 23-26 September 2001, Melbourne

  • Szyndler, M Pietrzyk and P.D. Hodgson, “Modification of Parameters in the Internal Variable Constitutive Model and Friction Model for Hot Forming of Steels”, Simulation of Materials Processing, ed. Ken-ichiro Mori, (2001) pp 297-302

  • P.D. Hodgson, P.J. Hurley and G.L. Kelly, “The Formation of Ultrafine Ferrite in Low C Steels Through Thermomechanical Processing”, School of Engineering and Technology, Deakin, Geelong, Australia, Manchester Materials Science Centre, University of Manchester and UMIST, Manchester, M1 7HS, UK

  • M.E Dingle, P.D. Hodgson and M.J. Cardew-Hall, “Analysis of the Elastic Behaviour of the Press System in Draw Die Forming”, Innovations in Processing and Manufacturing of Sheet Materials, TMS Minerals, Metals and Materials Society, (2001), Ed.: M.Y. Demeri-tms (The Minerals, Metals & Materials Society) 2001, pp 405-414

  • M.E. Dingle, P.D. Hodgson and M.J. Cardew-Hall, “Effect of Global and Local Stiffness on Blankholder Pressure in Draw Die Forming”, SAE Technical Paper Series, 2001-01-1138 SAE World Congress, Detroit, Michigan. 5-8 March (2001) pp 1-7

  • T. Hosking, B. Hill and P.D. Hodgson, “Runner Design to Control Defects in Iron Castings”, Society of Automotive Engineers, Inc. (2001)

  • S. Zhang, P.D. Hodgson, M.J. Cardew-Hall and S. Kalyanasundaram, “The finite element modelling of rear suspension arm using an non-uniform friction law”, The 7th International Conference on Numerical Methods in Industry Forming Processes, ed. Ken-ichiro Mori, 18-21 June, Toyohashi, Japan. (2001) pp

  • M. Gotzinger, S. Kalyanasundaram, P.D. Hodgson and M.J. Cardew-Hall, “A Methodology for Springback Prediction”, 2001 Automotive and Transport Technology (ATT) Congress and Exhibition (2001)

  • Fabijanic, G.L. Kelly and P.D. Hodgson, “Combating Adhesive Wear in Automotive Stamping”, Engineering Materials, 23-26 September (2001) pp 237-242

  • R.J. Gresham, P.D. Hodgson, J.I. Smith and M.J. Cardew-Hall, “Data Capture and Analysis System for Sheet Metal Forming Problems”, Sheet Metal 200 Proceedings, 9th International Conference on Sheet Metal, Leuven, Belgium. April 2-4 (2001) pp 521-527

  • J.J. Whale, G.L. Kelly and P.D. Hodgson, “Dynamic Transformation of Ferrite to Austenite to Ferrite Through Deformation Heating”, Institute of Materials Engineering Conference, ed. E. Pereloma & K. Raviprasad, 23-26 September (2001) pp 81-86

  • G.L. Kelly and P.D. Hodgson, “Dynamic Transformation of Ferrite to Austenite to Ferrite Through Large Strain Deformation”, Institute of Materials Engineering Conference, 23-16 September (2001) pp 96-99

  • I.B. Timokhina. P.D. Hodgson and E.V. Pereloma, “The Effect of Nb, Mo, and A1 Additions on the Transformation Behaviour and Mechanical Properties of Thermomechanically Processed C-Si-Mn Trip Steel”, Proceedings Institute of Materials Engineering Conference, 23-26 September (2001), Melbourne, Australia pp 57-62

  • S.T. Vlahovic, S.C. Savage, M.R. Barnett and P.D. Hodgson, “Warm Net Forging in the Production Environment”, Engineering Materials Conference, 23-26 September, ed. E. Pereloma, K. Raviprasad (2001) pp 69-74

  • Fabijanic, C.R. Miller, M.R. Barnett, M.J. Cardew-Hall, D.Haynes, and P.D. Hodgson, “Investigation of Tool Finish Direction and Lubrication in the Forming of Cylindrical Cups”, Proceedings 9th International Conference, Sheet Metal, Katholicke Leuvan, Belgium, 2-4 April, 2001

  • Scott-Murphy, M.J. Cardew-Hall, S. Kalyanasundaram and P.D. Hodgson, “Knowledge Based Optimisation Techniques for Sheet Metal Forming Die Design”, 7th International Conference on Numerical Methods in Industry Forming Processes, Numiform, Japan, Ed. Ken-ichiro Mori, 18-20 June (2001) pp 751-758

  • I.B. Timokhina, P.D. Hodgson and E.V. Pereloma, “Laboratory Simulations of Controlled Thermomechanical Processing of C-Mn-Si Steel”, Thermec, 4-8 December (2001)

  • I.B. Timokhina, P.D. Hodgson, and E.V. Pereloma, “Morphology and Stability of Retained Austenite in Thermomechanically Processed C-Mn-Si (-Nb) Trip Steels”, Conference Proceedings - Euromat 2001 - Rimini, 10-14 July 2001, Associazione Italiana di Metallurgia

  • P.J. Campbell, P.D. Hodgson, and M.J. Cardew-Hall, “Optimisation of Production Decisions with Stochastic Process Failures”, 16th International Conference on Production Research - ICPR -16, Prague, Czech Republic

  • R.I. Scott, H. Wolfkamp, A.Brownrigg and P.D. Hodgson, “Prediction of Plastic Set in Sheet Steel using Variable Radius Springback Measurements”, 43rd MWSP Conference Proceedings, ISS, Vol. XXXIX, 2001, Charlotte, North Carolina, October 28-31, 2001, pp 221-234

  • P.J. Campbell, M.J. Cardew-Hall and P.D. Hodgson, “Production Decisions and Lot Sizing for Automotive Stamping”, SAE Technical Papers Series, (2001)

  • M.C. Doolan, S. Kalyanasundaram, P.D. Hodgson, and M.J. Cardew-Hall, “Signature Analysis Using Active Shape Models”, 9Proceedings of Sheet Metal 2001, 9th International Conference, Leuven, Belgium, 2-4. April 2001, pp 547-554

  • H. Beladi, A. .Zarei-Hanzaki, P.D. Hodgson and S. Yue, “Austenite Formation in Si-Mn TRIP Steels”, J.J. Jonas Symposium, COM 2000, ed. S. Yue and E. Essadiqi, CIM, Montreal (2000) pp 515-526

  • S. Zhang, P.D. Hodgson, M. Cardew-Hall, S. Kalyanasundaram, “Micromechanical Simulation of frictional behaviour in metal forming”, The Conference of Metallurgists COM 2000

  • L.X. Kong and P.D. Hodgson, “Development of an Artificial Neural Network Model Integrated with Constitutive and FEM Models”, Mathematical Modelling in Metals Processing and Manufacturing – COM 2000, File name: artificial.pdf, Martin et al (eds), , ed. P. Martin, S. MacEwen, Y. Verreman, W. Lui, J. Goldale, Met Soc., Ottawa, Canada, August (2000)

  • L.X. Kong, P.D. Hodgson and S. Nahavandi, “Development of an Intelligent Decision Support System”, International Conference on Systems Thinking in Management, (ICSTM2000) Geelong, Australia, November ( 2000) pp 306-311

  • S. Zhang, P.D. Hodgson, M.J. Cardew-Hall and S. Kalyanasundaram, “The Finite Element Simulation of Metal Forming Using Local Contact”, The 8th International Conference on Manufacturing Engineering, Australian Technology Park, 27-30 August, 2000, Sydney, Australia (2000) pp 144

  • M. Doolan, S. Kalyanasundaram and P.D. Hodgson, “Identifying the Cause of Variation in Sheet Metal Stamping”, ICME2000, 8th Int. Conf. On Manufacturing Engineering, Sydney, Australia, 27-30 August (2000)

  • D.M. Fabijanic, M.R. Barnett, P.D. Hodgson and M.J. Cardew-Hall, “Improving the Galling Resistance of Automotive Stamping Tools”, Metal Forming 2000, Proceedings 8th Int. Conf. On Metal Forming, Krakow, Poland, 3-7 September 2000, ed: M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, I. Pillinger and A.A. Balkema, Rotterdam, (2000) pp 641-646

  • S.C. Savage, M.R. Barnett and P.D. Hodgson, “Investigation into Cold Heading Lubricants”, Metal Forming 2000, ed. M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley and I. Pillinger, A.A. Balkema, Rotterdam, (2000) pp 569-575

  • J. Smith, R. Gresham, P.D. Hodgson and M.J. Cardew-Hall, “Knowledge Capture System for Sheet Metal Forming Problems”, 8th International Conference Manufacturing Engineering, ICME2000, Australian Technology Park, Sydney, Australia, 27-30 August (2000)

  • S. Zhang, P.D. Hodgson, M.J. Cardew-Hall and S. Kalyanasundaram, “Microscopic Simulation of Frictional Behaviour in Metal Forming”, The 39th Conference of Metallurgists, ed. P. Martin, S. Macewan, V. Yerreman, W.J. Liu, J. Goldak, 20-23 August, Ottawa, Canada. (2000)

  • L.X. Kong and P.D. Hodgson, “Prediction of Deformation Force at Different Strains During Steel Rolling”, Metal Forming 2000, ed. M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley and I. Pillinger, A.A. Balkema, (2000) pp 263-268

  • M.R. Barnett, G.L. Kelly and P.D. Hodgson, “Predictions of Dynamic Recrystallisation in Aluminium Based on Static Recrystallisation Data”, Light Metals 2000 Métaux Légers, COM2000, ed. J. Kazadi and J. Masounave, CIM, Montreal (2000) pp 439-452

  • P. Campbell, S. Kalyanasundaram, P.D. Hodgson and M.J. Cardew-Hall, “Production Decisions and Lot Sizing Incorporating Random Machine Failure”, 8th Int. Conf. on Manufacturing Engineering, ICME2000, Australian Technology Park, Sydney, Australia, 27-30 August (2000)

  • G.L. Kelly and P.D. Hodgson, “The Production of Fine-grained Austenite and Ferrite in Steels Through Thermomechanical Processing”, Thermomechanical Processing of Steel. J.J. Jonas Symposium, COM 2000, ed. S. Yue and E. Essadiqi, CIM, Montreal (2000) pp 335-349

  • P.D. Hodgson and M.R. Barnett, “The Thermomechanical Processing of Steels–Current Status and Future Trends”, Proceedings of the 8th Int. Conf. On Metal Forming 2000, ed. M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley and I. Pillinger, A.A. Balkema, Rotterdam (2000) pp 21-28

  • G.L. Kelly and P.D. Hodgson, “Ultrafine Ferrite Production by Strain-Induced Transformation”, 42nd Mechanical Working and Steel Processing ISS-AIME, Vol. XXXVIII, (2000) pp 515-522

  • D.C. Martin, P. Mantyla and P.D. Hodgson, “An Analysis of Friction in Finish Rolling of Hot Steel Strip”, Modelling of Metal Rolling Processes 3, ed. J.H. Beynon, M.T.R. Clark, P. Ingham, P. Kern and K. Waterson, The Institute of Materials, London, UK. December (1999) pp 150-159

  • L.X. Kong, P.D. Hodgson, K.K Um and B. Wang, “a systems aporoach

  • of Hot Strength on Hot Rolling”, Modelling of Metal Rolling Processes 3, ed. J.H. Beynon, M.T.R. Clark, P. Ingham, P. Kern and K. Waterson, The Institute of Materials, London, UK, December (1999) pp 116-122

  • Baliga, P.D. Hodgson and E.D. Doyle, “Analysis of Punch Grinding Tools” Tooling'99, Melbourne (1999) pp 7-12

  • L. Lin, R.G. Bathgate, L.X. Kong, P.D. Hodgson, B. Wang and G. Lu, “The Effect of Die Design on the Bar Drawing with Combined Torsion”, Tooling '99, IMEA and TIFA, Melbourne (1999) p 50

  • A S. Murphy, S. Zhang, P.D. Hodgson, M.J. Cardew-Hall and S. Kalyanasundaram, “Finite Element Modelling of Sheet Metal Forming” Tooling '99, Melbourne (1999) pp 39-44

  • S.C. Savage, D.J. Kershaw and P.D. Hodgson, “Lubrication Coating Evaluation Technique for a Cold Heading Operation”, Tooling'99, Melbourne (1999) pp 55-60

  • J.B. Balatbat, M.J. Cardew-Hall and P.D. Hodgson, “A Systems Approach to Sheet Metal/Tool Surface Interface Incorporating Wear” Tooling '99, Melbourne (1999) pp 13-18

  • L.X. Kong, L. Lin, P.D. Hodgson and B. Wang, “Behaviour of Materials under Combined Drawing and Cyclic Torsion”, 8th International Conference on Mechanical Behaviour of Materials, ed. F. Ellyin and J.W. Provan, Vol. I, Victoria, Canada, May (1999) pp 195-200

  • G.L. Kelly and P.D. Hodgson, “Comparison of Static and Metadynamic Recrystallisation in Plain Carbon Steel”, Materials Research Forum, ed. E.V. Pereloma and G.H. Edward, Monash University, Clayton. November (1999) pp 115-120

  • L.X. Kong and P.D. Hodgson, “Constitutive Analysis of Flow Strength of Austenitic Steels with the Integration of ANN models”, 8th International Conference on Mechanical Behaviour of

  • Baliga, P.D. Hodgson and E. Doyle, “Effect of Contact Length in Off-round Grinding”, ABTEC 99, World Scientific Publishing Co. Singapore [E1] (1999) pp 116-123

  • Scott-Murphy, M.J. Cardew-Hall, P.D. Hodgson and S. Kalyanasundaram, “FEM Optimisation of Sheet Metal Forming”, Sheet metal Forming Technology, (1999) pp 77-91

  • S. Zhang, P.D. Hodgson, M.J. Cardew-Hall and S. Kalyanasundaram, “The Finite Element Simulation of Metal Forming with Improved Constitutive Equation for Local Contact”, Thirteenth Australian Compmod Users Conference, Kimberley Gardens, Melbourne, Victoria, Australia. Section 21, 12-13 October (1999) pp 1-19

  • S. Zhang, P.D. Hodgson, M.J. Cardwell-Hall and S. Kalyanasundaram, “The Finite Element Simulation of Sheet Metal Forming with Local Friction Model”, Proceedings of the IASTED International Conference of App lied Modelling and Simulation. 1-3 September Cairns, Australia. 300-159 (1999) pp 1-6

  • M.R. Hickson, P.J. Hurley, G.L. Kelly, P.D. Hodgson and M.R Barnett, “Formation of Ultra-fine Grained Steels”, Second Symposium on Super Metal, November 1999, National Olympics Memorial Youth Centre, Tokyo, Japan (1999) Invited paper, pp 203-213

  • M. Doolan, S. Kalyanasundaram, P.D. Hodgson and M.J. Cardew-Hall, “Identifying Variation in Sheet Metal Forming”, 7th International Conference on Sheet Metal, SHEMET99 (1999) pp 117-124

  • L.X. Kong and P.D. Hodgson, “Improving the Prediction Accuracy of Constitutive Model with ANN Models”, IPMM '99, Hawaii, June (1999), Ed:. J.A. Meech, M.M. Veriga, M.H. Smith and S.R. LeClair, Vol. II, IEEE, pp 389-394

  • L.X. Kong, P.D. Hodgson, L. Lin, and B. Wang, "Material Properties under Drawing and Extrusion with Cyclic Torsion", Materials Science and Engineering, A. Structural materials : properties, microstructure and processing, Vol 308, No. 1-2, pp 209-215

  • L.X. Kong L. Lin, P.D. Hodgson and B. Wang, “Material Properties under Combined Drawing/Extrusion and Cyclic Torsion”, IPMM '99, ed. J.A. Meech, M.M. Veriga, M.H. Smith and S.R. LeClair, Vol. I, IEEE, Hawaii, June (1999) pp 953-958

  • Scott-Murphy. M. J. Cardew-Hall, P.D. Hodgson and S. Kalyanasundaram, “Novel Criteria and Tools for the FE Optimisation of the Sheet Metal Forming Process”, NUMISHEET 99, 4th International. Conference On Numerical Simulation of 3D (1999) pp 305-310

  • P.D. Hodgson, “Recent Developments in the Thermomechanical Processing of Steels”, Materials Research Forum, ed. E.V. Pereloma and G.H. Edward, Monash University, Clayton, November (1999) pp 87-94

  • T.D. Hosking, B. Hill and P.D. Hodgson, “Shrinkage Porosity Assessment and Minimisation in a Grey Iron Casting”, Materials Research Forum Proceedings, ed. E.V. Pereloma and G.H. Edward, Monash University, Clayton November (1999) pp 29-34

  • E.V. Pereloma, I.B. Timokhina and P.D. Hodgson, “TEM Characterisation of Microstructures Formed in Discontinuously Cooled C-Mn-Si(-Nb) Steels”, Proc Int. Conference on Solid-Solid Phase Transformations, ed.. M. Kolwa, K. Otsuka and T. Miyazaki, The Japan Institute of Metals (1999) pp 1513-1516

  • D.A Haynes, M. Barnett and P.D. Hodgson, “The Production of ZINCANNEAL Coated Steels in Sheet Metal Forming”, Materials Research Forum, ed. E.V. Pereloma and G.H. Edward, Monash University, Clayton November (1999) pp 133-136

  • P.D. Hodgson and P. Mandal, “A Systems Approach to Rod and Bar Processing”, 41st MWSP Conference Proceedings, ISS, Vol XXXVII, 1999, pp.159-170

  • L.X. Kong, D.C. Collinson and P.D. Hodgson, “Application of an Integrated Phenomenological Neural Network Model to Extrapolatively Predict the Hot Strength of Austenitic Steels”, Proceedings 7th International Conference on Steel Rolling (Steel Rolling '98) Chiba, Japan Iron and Steel Institute, Japan pp 540-545

  • L.X, Kong, D.C. Collinson and P.D. Hodgson, “Optimisation of ANN Models to Predict the Effect of Carbon Content on the Hot Strength of Austenite”, Proceedings of Materials 98, The Biennial Conference of the Institute of Materials Engineering, Australasia Ltd, July 6-8 1998, University of Wollongong, pp 553-558

  • Baliga, E.D. Doyle, P.D. Hodgson, B. Wang, “Punch Grinding Torque Analysis”, Proceedings of the International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Indian Institute of Technology, Karagpur, India

  • L.X. Kong and P.D. Hodgson, “Development of ANN Model Strategy to Improve the Prediction of Flow Strength of Austenitic Steels”, Advances in Engineering Computational Technology. ed. Topp ing, B.H.V. Civil-Comp Press, Edinburgh (1998). pp 155-164

  • L.S. Burgess-Dean, B.R. Crawford and P.D. Hodgson, “A Mechanical Test for the Durability of Fire ClayProducts Usiing Brinell Hardness Measurements”, The 5th Australasia Masonry Conference, July 1-3, pp.37-46, Central Queensland University, Gladstone, Australia

  • J. Lanzon, M.J. Cardew-Hall and P.D. Hodgson, “Effect of Boundary Lubricant Regimes in Sheet Metal Forming”, Proceedings of Materials, 1998 Ed.: Michael Ferry,. Inst of Materials Engineering, Australasia Ltd (1998) pp 239-246

  • M.E. Dingle, B.R. Crawford, J.J. Whale and P.D. Hodgson, “The Effect of Retained Strain on Ferrite Formation in C-Mn-Nb Steels”, Materials 1998 ed Michael Ferry, Inst of Materials Engineering, Australasia Ltd (1998) pp 559-566

  • D.C. Martin and P.D. Hodgson, “Friction Modelling in the Hot Rolling of Steel Strip”, Materials 1998 ed Michael Ferry, Inst of Materials Engineering, Australasia Ltd, (1998) pp 253-258

  • J.B. Balatbat, J.M. Lanzon, M.J. Cardew-Hall and P.D. Hodgson, “Hard Chrome Plating Effects on Friction”, Materials 1998 ed Michael Ferry, Inst of Materials Engineering, Australasia Ltd, (1998) pp 353-358

  • P. Cizek, B.P. Wynne, C.H.J. Davies, B.C. Muddle, C.R. Killmore and P.D. Hodgson, “Microstructural Characteristics of Mo – containing Low and Ultra Low Carbon Microalloyed Pipeline Steels”, Materials 1998 ed Michael Ferry, Inst of Materials Engineering, Australasia Ltd (1998) pp 547-552

  • B.P. Wynne, P. Cizek, C.H.J. Davies, B.C. Muddle, M.R. Hickson and P.D. Hodgson, “Texture in Cold-Rolled and Annealed Low-Carbon Microalloyed Steels”, Materials 1998 ed Michael Ferry, Inst of Materials Engineering, Australasia Ltd (1998) pp 185-190

  • Baliga, E.D. Doyle and P.D. Hodgson, “Thermal Modeling of Punch Grinding”, Materials 1998 ed Michael Ferry, Inst of Materials Engineering, Australasia Ltd, (1998) pp 227-232

  • J. Jaipal, C.M.J. Davies, B.P. Wynne, A. Brownrigg, W.Y.D. Yuen and P.D. Hodgson, “Work Hardening and Strain Rate Sensitivity of 0.06 Wt%C Steel”, Proceedings of Materials 1998 ed Michael Ferry, Inst of Materials Engineering, Australasia Ltd (1998) pp 541-546

  • Download 453.23 Kb.

    Share with your friends:
    • 1   2   3   4   5   6   7



    The database is protected by copyright ©ininet.org 2024
    send message
        Main page
    third international conference