Curriculum Vitae personal details
Download 319.53 Kb.
|
- Navigate this page:
- Consultancy Portfolio
- Professor P R MOORE PUBLICATIONS LIST Supervised Ph.D. / M.Phil. Completions
- Skaraborg Regional Prize – Best PhD. Thesis 2001/2.
- Articles in, or Contributions to Edited Works
- Papers in Refereed Academic Journals
Study ToursFlexible Assembly and Robotics - to assess assembly technology, applications and research programmes. December 1986. Europe including Italy, France, Switzerland, West Germany and Holland in addition to many UK visits. March 1987 USA. These study tours involved visits to Research Institutions, Universities, Equipment manufacturers, Systems builders and application sites to assess the current state of the art in Flexible Assembly and Robotics. Some 4 research institutions, 25 companies, and 11 universities were personally visited during this study programme. Open Architecture Real-time Control Systems - to assess the current status of research and development in open architecture control systems in the USA (May 1993). Visits included NIST, Wright-Patterson, Purdue, Echelon, and Cimetrix. Overseas Science and Technology Expert Mission Scheme (OSTEMS) study tour (sponsored by the DTI) of the Basque country in Spain to investigate manufacturing organisation and technology (with a particular emphasis on control technology). I was invited to lead this mission of four eminent industrialists and one academic. We were hosted by nine organisation including manufacturing companies, research centres, and science parks. The mission was reported extensively in the local in the local media. 10-15 September 1995. Organiser and lead for a UK Global Watch Service Mission sponsored by the DTI on “Mechatronics: Applications in specialised machinery, production, aerospace and defence sectors” to Russia from 13-17th November 2006 with technical visits to industrial sites, research institutions and HEI’s in Moscow and St Petersburg. The delegation included members from Rolls-Royce, MBDA, Mitsui-Babcock, RU Robots, PERA-ITP, De Montfort University and the British Embassy in Moscow. The Mission Report launch and national dissemination event will take place on 21st March 2006 at the IMechE in London. Consultancy Portfolio A moderate consultancy role has been pursued. Clients have included: DTI, Hestair Maclaren Ltd, S S White Industrial Ltd, Croydex, Davy McKee, Southpoint Ltd, WDA and Calon Associates. Consultancy tenders have also been written on behalf of clients. Client studies have included: appraisals of existing manufacturing methods and product designs, automation feasibility studies, workstation design, configuration and implementation, and engineering support functions. Professor P R MOORE PUBLICATIONS LIST Supervised Ph.D. / M.Phil. Completions Goh A S. (1994) “Steps Towards Next Generation Machine Control Systems”. Loughborough University of Technology. Chen C. (1995) “Motion Control and Synchronisation of Multi-Axis Drive Systems” Loughborough University of Technology. Eriksson P. (1996) “Enhancements in Virtual Robotics”. De Montfort University. Yeung R W H (1998) “Advanced Cell Control Architectures: Applications in Flexible Assembly Systems”, De Montfort University. Mahalik N P (1998) “Steps towards Component Validation and Life Cycle Data Acquisition in Distributed Machine Control Systems”, De Montfort University. Xie C (1999) “Component-based Distributed Control for Machine Systems”, De Montfort University. Zhang Z (1999) “Design and Modelling of High Performance and Energy Efficient Servo-Pneumatic Systems”, De Montfort University. Oscarsson J (2001) “Enhanced Virtual Manufacturing: An Application of Digital Mock-up Technology”, De Montfort University. Skaraborg Regional Prize – Best PhD. Thesis 2001/2. Chong S K (2002) “Component-based Run-time Support Framework for Agile Manufacturing Machine Systems”, De Montfort University. Danielsson F (2002) “Design, verification and off-line programming of industrial control systems”, De Montfort University, UK / University of Trollhattan-Udvalle. Pan H (2002) “Closed circuit pneumatic servo systems”, M.Phil., De Montfort University. M Shafik (2003) “Design, control and optimisation of piezo-actuation for application in manufacturing machinery”, De Montfort University. Dai H (2003) “Distributed control architectures and smart sensing for intelligent semi-autonomous vehicles”, De Montfort University. Chen X (2003) “Component based control system development for agile manufacturing machine systems”, De Montfort University. Graves A (2003) “Enhanced control of mobile robots using AI techniques”. De Montfort University. Ng H C (2003) “Integrated Design, Simulation and Programming Environments for Modular Manufacturing Machine Systems", De Montfort University. Ujvari S (2003) “The use of simulation in automated guided vehicle system design”, De Montfort University. Nordqvist A (2004) “User Interface Design and Evaluation in a Manufacturing Engineering Context: A Usability Perspective”. De Montfort University. Jagstam M (2005) “On efficient use and integration of Discrete Event Simulation in Industry“, De Montfort University. Olofsgard P (2005) “Distributed systems integration for the development of modular machines”, De Montfort University. Karlsson T (2005) “Information Reuse and Structuring for Virtual Manufacturing”, De Montfort University. Yeo San Ho (2006) “3D-based Advanced Machine Service Support”, De Montfort University. Yang X. Kevin (2006) “A Methodology for Implementing Product Service Systems for Consumer Products”, De Montfort University. Pan H (2006) “Design and control of components-based integrated servo pneumatic drives”, De Montfort University. Yang A (2006) “Energy efficient pneumatic servo systems”, De Montfort University. Saleem A (2006) “Modelling and control of servo-pneumatic systems”, De Montfort University. Solding P (2008) “Use of Simulation for Modelling and Optimisation of Energy Intensive Industries”, De Montfort University. Hussein M (2008) “Real-Virtual Systems in the Design of Machine Control Systems”, De Montfort University. Syberfeld A (nee Persson) (2009) “Optimisation Techniques used in the Simulation of Real World Problems”, De Montfort University. Urenda Moris M (2010) “Modelling variability in inpatient healthcare units”, De Montfort University. Niami I (2011) “Multimodal Approach for Non-tagged Indoor Occupancy Identification and Tracking”, De Montfort University. Gustavsson P (2012) “Modelling, Formalising, and Implementing Intent in Command and Control Systems”, De Montfort University. Frantzen M (2013) “A real-time simulation based optimisation environment for industrial scheduling”, De Montfort University. Al-Khawaldeh M (2014) “Robotic systems as an aid in assistive living” De Montfort University. Proesser M (2014) “A New Approach Towards Systems Integration Within the Mechatronic Engineering Design Process of Manufacturing Systems” De Montfort University. Speltz H F (2014) “Life Cycle Information Acquisition and Management for blood products in a transfusion - medical environment”. Submitted for MPhil., De Montfort University. G M J Qaryouti (2014) “Open architecture smart home technologies”. De Montfort University. Articles in, or Contributions to Edited Works Weston R H and Moore P R (1988) "Industrial Robots - Modular Systems", Encyclopaedia of Systems & Control, pp 2459-2464. Editor-in-Chief Madan Singh, Pergamon Press. Thatcher T W, Weston R H and Moore P R (1984) "Software for Modular Robots", Advanced Software in Robotics. Edited by A Danthine & M Geradin, North Holland Press. Moore P R, Ssenkungo F W, Weston R H and Thatcher T W (1987) "Motion Control of Distributed Manipulators Using Pneumatic Servo Drives", Computer Applications in Production and Engineering, CAPE '86 pp 91-110. Edited by K Bo, Le Estensen, P Falster and E Warman. Published by North-Holland. Pu J, Weston R H and Moore P R (1990) "Performance Characteristics of Spool Type Pneumatic Valves", Fluid Power Proceedings of the 9th Int. Symposium. Scientific & Technical International, UK. Chapter 10, pp 111-124. Moore P R, Pu J, Harrison R and Weston R H (1992), Chapter "A General Purpose Digital Motion Controller for Fluid Power Systems" in 'Fluid Power Systems, Modelling & Control'. Edited by K. Edge & C. Burrows. Published by Research Studies Press, ISBN 0 86380 130 7, pp 276-290. Moore P R, Pu J and Harrison R (1993), Chapter "Progression of Servo Pneumatics Towards Advanced Applications" in 'Fluid Power Circuit, Component & System Design'. Edited by K. Edge & C. Burrows. Published by Research Studies Press, ISBN 0 86380 139 0, pp 347-365. Pu J, Moore P R, Harrison R and Weston R H (1994), Chapter “A Study of Gain-Scheduling Method for Controlling the Motion of Pneumatic Servos” in ‘Modelling and Simulation’. Edited by K. Edge and C. Burrows. Published by Research Studies Press, ISBN 0 86380 162 5, pp 193-210. 10th International Workshop on Research and Education in Mechatronics (2009). Conference Proceedings Edited by: Xui-Tian Yan, Jonathon Corney and Philip Moore. Published by University of Strathclyde. Moore P R., Wong C B., and Chen X. (2013), Article title: “Smart Appliances” as a “Research Update” December 2013. McGraw-Hill Yearbook of Science & Technology. McGraw-Hill Professional. Papers in Refereed Academic Journals Moore P R, Weston R H and Thatcher T W (1985) "Compensation in Pneumatically Actuated Servo-Mechanisms" Transactions Institute of Measurement and Control. Vol. 7, No 5, October - December, pp 238-244. Weston R H, Moore P R, Thatcher T W and Morgan G (1984) "Computer Controlled Pneumatic Servo-Drives" IME Pt B, December, Vol. 198B, No 14, pp 175-281. Moore P R, Ssenkungo F W, Weston R H and Thatcher T W (1986) "Control Strategies for Pneumatic Servo-Drives" International Journal of Production Research, Vol. 24, No 6, pp 1363-1382. Weston R H, Moore P R and Thatcher T W (1984) "Design of Modular Robotic Systems" Microprocessors and Microsystems, February, Vol. 8, No 1, pp 15-20. Thatcher T W, Weston R H and Moore P R (1984) "Software Structures for Modular Robots" International Journal of Production Research, Jan, Vol. 22, No 1, pp 71-84. Harrison R, Weston R H and Moore P R (1987) "A Study of Application Areas for Modular Robots" in Robotica, Vol. 5, pp 217-221. Weston R H, Harrison R, Booth A H and Moore P R (1989) "Universal Machine Control System Primitives for Modular Distributed Manipulator Systems", Special Issue on Robotics of Int. J. Prod. Res., Vol. 27, No 3, March, pp 395-410. Weston R H, Harrison R, Booth A H and Moore P R (1989) "A New Approach to Machine Control", Computer Aided Engineering Journal, February, pp 27-32. Weston R H, Moore P R, Harrison R and Booth A H (1989) "Modular Machines and a New Approach to Machine Control", Computer Integrated Mechanical Engineering, ASME, USA. Weston R H, Harrison R, Booth A H and Moore P R (1989) "A New Concept in Machine Control" Journal of CIM, Butterworth, Vol. 2, No 2, May, pp 115-122. Pu J, Weston R H, Harrison R and Moore P R (1989) "Software Design of Distributed Single-Axis Motion Controllers for Industrial Applications". Microprocessing & Microprogramming, Vol. 27, North-Holland, pp 53-60. Pu J, Harrison R, Weston R H and Moore P R (1990) "Architecture/Software Design for Machine Control". J. of Advanced Manufacturing Engineering, Butterworth-Heineman, October, Vol. 2, pp 195-203. Pu J, Moore P R and Weston R H (1991) "Digital Servo Motion Control of Air Motors". International Journal of Production Research, Taylor-Francis, Vol. 29, No. 3, pp 599-618. Pu J, Moore P R and Weston R H (1991) "High-gain Control and Tuning Strategy for Vane Type Reciprocating Pneumatic Servo Drives". International Journal of Production Research, Taylor-Francis, Vol. 29, No. 8, pp 1587-1601. Pu J, Weston R H and Moore P R (1992) "Digital Motion Control and Profile Planning of Servo Pneumatic Drives". Journal of Dynamic Systems, Measurement and Control, Trans. of ASME, December, Vol. 114, pp 634-640. Moore P R and Armstrong N (1994) "A Distributed Control Architecture for Intelligent Crane Automation". International Journal 'Automation in Construction 3'. Published by Elsevier Science, No. 3, pp 45-53. Pu J, Moore P R and Wong C B (1995) “Commissioning of a Servo-Pneumatic System for Timing and Profile Control in a High Speed Food Packaging Application”. International Journal of Production Research, Taylor-Francis, Vol. 33, No.10, October. pp 2907-2922. (ISN 0020 - 7543) Carrott A J, Moore P R, Weston R H and Harrison R. (1996) “The UMC Software Environment for Machine Control System Integration, Configuration and Programming”. IEEE Transactions on Industrial Electronics, Special Issue on ‘Developments in Mechatronics.’ pp. 1-29, Vol. 43, No. 1, February. (ISN 0278-0046) Moore P R and Chen C (1996) “Fuzzy Logic Coupling and Synchronised Control of Multiple Independent Drives”. Journal of IFAC ‘Control Engineering Practice’, December, Volume 3, No. 12, pp. 1697-1709. Yeung W H R and Moore P R. (1997) “Distributed Cell Controllers using Petrinets and Fieldbus: An Application in Flexible Assembly”. International Journal of Production Research, Taylor-Francis, Volume 35, Number 2, pp. 327-340. Yeung W H R and Moore P R. (1996) “Object-Oriented Modelling and Control of Flexible Conveyor Systems for Automated Assembly”. Mechatronics, Elsevier, Volume 6, Number 7, pp. 799-815. Qiao H, Moore P R and Knight J A G. (1996) “Validation of Two Strategies for Robotic Peg-Hole Operations Without Force Sensors or RCC Using Any Type of Robot”, Accepted by the Institution of Mechanical Engineers, Journal of Mechanical Engineering Science, Proceedings, Part C. Qiao H, Moore P R and Knight J A G. (1996) “A Model and Strategy Analysis of a Peg-Hole System…”, Robotica, Cambridge University Press, Volume 14, pp. 647-658. Qiao H and Moore P R. (1996) “Simulation of the Searching Process in Peg-Hole Assembly Operations Without Chamfers”. Submitted for publication. Mahalik N P and Moore P R. (1997) “Fieldbus Technology Based Distributed Control in Process Industries: A Case Study with LonWorks Technology”. Journal of Integrated Manufacturing Systems, MCB University Press, Volume 8, Issue 4. Mahalik N P, Moore P R and Pu J (1997) “Emerging Real-Time Control Networking Systems for Manufacturing and Process Plant: Design Methodology”. Journal of Production Engineering, IE (I), India, Volume 78, May. Mahalik N P, Moore P R and Pu J (1998) “Fault Detection in Technical Processes with Fieldbus”. Journal of Production Engineering, IE (I), India, Volume 79, May. Mahalik N P and Moore P R (1998) “Mechatronics: A Technology with New Possibility”. Journal of Interdisciplinary, IE(I). To be published Yeung W HR and Moore P R. (1998) “Towards a Fault Tolerant Cell Controller for Flexible Assembly Systems: An Approach Using Colour Petri-Nets”. Accepted for publication in March, Mechatronics (Elsevier). Pu J, Wong C B and Moore P R (1996) “Pressure, Speed and Torque Characteristics of Servo-Pneumatic Drives”. Submitted to ASME Transactions. pp. 1-25. Wang J, Pu J, Moore P R and Wong C B (1997) “Modelling Study of Air Motor Systems”. Accepted by Journal of IFAC ‘Control Engineering Practice’. Wang J, Pu J, Moore P R and Zhang Z (1998) “Modelling Study and Servo-Control of Air Motor Systems”. Accepted by the International Journal of Control, Taylor Francis. 19 pages. Wang J (1997) “Feedback Stabilisation of a Class of Uncertain Nonlinear Dynamical Systems”. Accepted by the Journal of ‘Dynamic Systems and Applications’, USA, July. Xie C, Pu J and Moore P R (1998) “A Case Study on the Development of Intelligent Actuator Components for Distributed Control Systems Using LONWORKS Neuron Chips”. Accepted for publication, Mechatronics (Elsevier). Yeung W H R and Moore P R (1999) “Steps Towards Advanced Cell Control Systems: An Application in Flexible Assembly Systems”, International Journal of Intelligent Automation and Soft Computing - Special issue on Advances in Intelligent Manufacturing. Paper IA.98.27, Volume 7, Number 1. Zheng Y, Z.Z Han and Moore P R (1998) “The Design of Time Optimal Control for Two Wheel Driven Carts Catching a Target Moving on a Known Trajectory”. Mechanism and Machine Theory, pp1-12, Oct.. Pu J, Moore P R and Wong C B (1998) “Energy Efficient Pneumatic Servo Control”, Invited Paper for OLEODINAMICA-PNEUMATICA, for a forthcoming issue on ‘Motion control in pneumatics’, Publisher Techniche-Nuove, Milan. Yeung, W H R and Moore P R (2000) “Genetic Algorithms and Flexible Process Planning in the Design of Fault Tolerant Cell Control for Flexible Assembly Systems”, International Journal of Computer Integrated Manufacturing (IJCIM), editor S.T. Newman. ISSN 0951-192X / ISSN 1362-3052. Wang J, Pu J and Moore P R (1999) “Accurate Position Control of Pneumatic Actuators and Application to Food Packaging”, Journal of IFAC ‘Control Engineering Practice’, Volume 7 Issue 6, pp 699-706. Wang J, Pu J and Moore P R (1999) “A Practical Control Strategy for Servo Pneumatic Actuator Systems”, Journal of IFAC ‘Control Engineering Practice’, Volume 7, pp 1483-1488. Moore P R, Ujvari S, Pu J, Lundgren J O and Xie C (1999) “Intelligent Semi-Autonomous Vehicles in Materials Handling”, Journal of Mechatronics (Elsevier) for a ‘Special Issue’ from Mechatronics ’98 International Conference, The 6th UK Mechatronics Forum Conference, 9-11 September 1998, Skövde, Sweden. Mechatronics 9 (1999), pp 881-892, ISSN 0957-4158/99/00027-6. Moore P R (1999) “Guest Editorial – Special Issue based on Mechatronics ’98 - The 6th UK Mechatronics Forum Conference”. Journal of Mechatronics (Elsevier) - ‘Special Issue’ from Mechatronics ’98 International Conference, 9-11 September 1998, Skövde, Sweden. Mechatronics 9 (1999), pp iii-iv, ISSN 0957-4158/99/00027-6. Pu J and Moore P R (2000) “Smart Components-based Servo Pneumatic Actuation Systems”, Journal of Microprocessors and Microsystems (Elsevier) for a ‘Special Issue’ from Mechatronics ’98 International Conference, The 6th UK Mechatronics Forum Conference, 9-11 September 1998, Skövde, Sweden. Moore P R (2000) “Guest Editorial – Special Issue based on Mechatronics ’98 - The 6th UK Mechatronics Forum Conference”. Journal of Microprocessors and Microsystems (Elsevier) for a ‘Special Issue’ from Mechatronics ’98 International Conference, The 6th UK Mechatronics Forum Conference, 9-11 September 1998, Skövde, Sweden. Oscarsson J and Moore P R (1999) “Production System Design Using Advanced Computer Aided Robotics”, Selected papers from CIRP, 31st CIRP Conference on Manufacturing Systems, Berkley, California, USA, 26-28 May. CIRP – Journal of Manufacturing Systems, Volume 29, Number 3, October 1999, pp 241-245. Ermolov I, Moore P R, Poduraev J and Shvedov V V (2000) “The Mobile Robots for Inspection and Repair of Underground Pipelines: The Modern State and Perspectives of Development”. Published in Journal ‘MEXATPOHNKA’ (Mechatronics), Volume Number 1, pp 36-38. (In Russian). Lakota N A, Noskov V P, Rubstov I V, Lundgren J O and Moore P R (2000) “Experience of Application of Primitive Artificial Intelligence in Control System of Workshop Transport Robot”. Published in Journal ‘MEXATPOHNKA’ (Mechatronics), Volume Number 4, pp 44-47. (In Russian). Simon M, Bee G, Moore P R, Pu J and Xie C (2001) “Modelling of the Life Cycle of Products with Data Acquisition Features”. Journal ‘Computers in Industry’ – Special Issue on Reuse (Elsevier). 1534 (2001) 1-12. PII: S0166-3615(01)00088-4 Wang J, Moore P R and Pu J (2001) “Modelling Study, Analysis and Robust Servo Control of Pneumatic Cylinder Actuator Systems”. IEE Proceedings – Control Theory and Applications. Volume 148, Number 1, January, pp 35-42. Adolfsson J, Ng H C, Olofsgard P, Moore P R, Pu J and Wong C B (2001) “Design and Simulation of Components-based Manufacturing Machine Systems”. Journal of Mechatronics (Elsevier) – selected for a ‘Special Issue’ from Proceedings - Mechatronics 2000 International Conference, The 7th UK Mechatronics Forum Conference, Atlanta, USA, 6-8th September 2000. Olofsgard P, Moore P R, Pu J and Wong C B (2002) “Distributed Virtual Manufacturing for Development of Modular Machine Systems”. International Journal of Advanced Manufacturing Systems – special issue on Virtual Manufacturing (International Society of Agile Manufacturing) December 2002 Issue. Danielsson F, Moore P R and Eriksson A P (2003) “Validation, Off-line Programming and Optimisation of Industrial Control Logic“. Journal ‘Mechatronics: the science of intelligent machines.’ (Elsevier Science). Paper ME996. ISSN 0957-4158, Volume 13, Issue 6, pp 571-585. Moore P R, Pu J, Ng H C, Wong C B, Chen X, Adolfsson J, Olofsgard P and Lundgren J O (2003) “ Virtual Engineering: An Integrated Approach to Agile Manufacturing Machinery Design and Control”. Invited contribution for 10th Anniversary Special Issue IFAC / Elsevier Science Journal – Mechatronics: the science of intelligent machines. ISSN 0957-4158/99/00027-6 De Vin L J, Ng H C, Sundberg M, Moore P R, Pu J and Wong C B (2006). “Information Fusion for Decision Support in Manufacturing: studies from the defence sector.” Published in the International Journal of Advanced Manufacturing Technology (Springer). October 2006. http://10.1007/s00170-006-0773-2 (Selected for publication from the IMC-22 conference papers). Mahalik N, Xie C, Pu J and Moore P R (2006). “Virtual Distributed Control Systems: a Components-based Design Method for Mechatronic Systems”. Emerald Journal ‘Assembly Automation’, Vol. 26, No. 1. pp44-53. Emerald 0144-5154. DOI 10.1108/01445150610645657 Moore P R, Ng H C, Yeo S H, Sundberg M, Wong C B and De Vin L (2006). “Advanced Machine Service Support using Internet-enabled 3-D based Virtual Engineering”. International Journal of Production Research (IJPR) – Tay;or-Francis. Ref: TPRS-2006-IJPR-0468.R1 Moore P R, Yeo S H, Wong C B and Pu J “Conceptual Framework for an Integrated 3-D based Machine Service Support Strategy” (2006). Accepted for publication subject to final amendments by the International Journal of Production Research (IJPR) – Taylor-Francis. October 2006. Yang K. X., Moore P. R., Wong C.B., Pu J. and Chong S. K. (2007) “Product Lifecycle Information Management for Consumer Products”. Journal of ‘Industrial Management and Data Systems’. (March 2007). IMDS ISSN: 0263-5577, Vol. 107, No. 7. (http://www.emeraldinsight.com/info/journals/imds/imds.jsp) Moore P R, Yang K X, Chong S K, Wong C B and Pu J (2007) “A component based software framework for product life-cycle information management for consumer products”. IEEE Transactions on Consumer Electronics, Vol. 53, No. 3, 2007. Yang A, Pu J, Wong C B and Moore P R (2008). “By-pass valve control to improve energy-efficiency of pneumatic drive system”. IFAC Journal of ‘Control Engineering Practice.’ CONPRA_CONENGPRAC-D-06-00126 Reference: CONPRA 2362. On-line publication: 6 December 2008. http://dx.doi.org/10.1016/j.conengprac.2008.10.013 Yang K. X., Moore P. R., Wong C.B., Pu J. Chong S. K. and Simon M (2008) “A Practical Methodology for Realising Product Service Systems for Consumer Products”. (In Press) Elsevier Journal of ‘Computers and Industrial Engineering’. CAIE-07-325R1. On line: http://dx.doi.org/10.1016/j.cie.2008.05.008 Yang K. X., Moore P. R., Wong C.B. and Pu J. (2008) “IDU and Service Enabler in Intelligent Products: from Lifecycle Data Acquisition to Knowledge-Intensive Service Enabler.” (In Press) Elsevier Journal of ‘Computers in Industry’. Special Issue on Intelligent Products. (Guest Editor: Prof. D McFarlane). Syberfeldt A, Grimm H, Ng A and Moore P R (2009). “Multi-Objective Evolutionary-Optimisation of a Real-World Manufacturing Problem”. Flexible Automation and Intelligent Manufacturing (FAIM 2008), International Conference, Skovde, Sweden. Accepted for publication in the FAIM2008 Special Issue in Elsevier Journal of ‘Robotics and Computer Integrated Manufacturing (RCM)’, Vol. 25, pg 926-931. DOI: dx.doi.org/10.1016/j.rcim.2009.04.013 Yang K. X., Moore P. R., and Chong S K. (2009) “Intelligent Products: From Lifecycle Data Acquisition to Enabling Product-related Services.” Elsevier Journal of ‘Computers in Industry’. Vol. 60, pp184-194. DOI http://dx.doi.org/10.1016/j.compind.2008.12.009 Saleem A, Moore P R, Wong C B & Pu J (2009) “Mixed reality environment for frictional parameters identification in servo-pneumatic system”. Published by Simulation Modelling Practice and Theory. DOI: 10.1016/j.simpat.2009.06.016 Solding P. Thollander P and Moore P R (2009). “Improved Energy Efficient Production Using Discrete Event Simulation”. Journal of Simulation. Vol 3, pg191-201. (www.palgrave-journals.com/jos/), 1747-7778/09. Syberfeldt A, Grimm H, Ng A, John R I and Moore P R (2009). “Evolutionary Optimisation of Multi-objective Problems using Confidence-based Dynamic Re-Sampling”. Published by Elsevier - European Journal of Operational Research (EJOR) November 2009 – Ms. No. EJOR-D-08-01942. Gustavsson P M, Hieb M R, Moore P R, Eriksson P and Niklasson L (2010), “Operations Intent and Effects Model”. Journal of Defense Modeling and Simulation: Applications, Methodology, Technology. DOI: 10.1177/1548512910379477. http://dms.sagepub.com. Pp1-23. Frantzen M, Ng H C and Moore P R (2011), “A Simulation-based Scheduling System for Real-time Optimisation and Decision Making Support”. Journal of Robotics and Computer-Integrated Manufacturing. Special Issue based on the FAIM 2010 International Conference best papers. DOI: 10.1016/j.rcim.2010.12.006 Wang. L., Adamson. G., Holm. M. & Moore. P R (2012) “A Review of function Blocks for Process Planning and Control of Manufacturing Equipment”. Journal of Manufacturing Systems Vol 31 No 3 (2012) 269-279. Prosser M, Moore P R, Chen X, Wong C B and Schmidt U (2013), “A new approach towards systems integration within the mechatronics engineering design process of manufacturing sytems”. Published by International Journal of Computer Integrated Manufacturing. DOI: 10.1080/0951192X.2013.785026. http://dx.doi.org/10.1080/0951192X.2013.785026 Wong C B, Chen X and Moore P R (2013), “Smart Appliances”. Published by McGraw-Hill Inc. Yearbook of Science & Technology 2014. The article will appear on-line as a ‘Research Update’ in December 2013. Chen X, Wong C B, Moore P R, and Pan H (2014). “Domestic energy management system: Holistic approach to domestic energy conservation.” Accepted by Journal of Energy and Building (Elsevier). Niami I, Chen X and Moore P R (2014). “Multimodal approach for non-tagged indoor identification and tracking using smart floor and pyroelectric infrared sensors”. Accepted for publication by International Journal of Computational Science and Engineering, Inderscience Publishers Ltd. Guo X, Chen X, Wong C B and Moore P R. “State based customised multiple-device service composition for a smart home system”. To be submitted to Journal of Ambient Intelligence and Smart Environments. Directory: sites -> default -> files -> staff-downloads files -> Northern England’s set-jetting locations files -> Nstructions for Acquiring Excess Equipment online, through the 1033 Program files -> Occupational health and safety files -> The Black Panther Party’s Ten Point Program files -> International programs roel profile files -> Fermi Questions a guide for Teachers, Students, and Event Supervisors Lloyd Abrams, Ph. D. DuPont Company, cr&D/ccas experimental Station Wilmington, de 19880 files -> Personal Information Name: Maha Al-Ammari Nationality: Saudi Relationship Status staff-downloads -> John Hall curriculum vitae address Download 319.53 Kb. Share with your friends:
|