CTE/ctepa/Trans/Documents
  Aut 184-185/aut 292 Automotive Service Technology Section C/Automotive Special Problems
  Inspect A/C condenser for airflow restrictions; perform necessary action
  Aut 188-189/aut 293 Automotive Service Technology Section D/Automotive Special Problems
  Identify abnormal operating noises in the A/C system; determine necessary action
  Identify and interpret heating and air conditioning problems; determine necessary action
  Aut 188-189/aut 293 Automotive Service Technology Section D/Automotive Special Problems
  Damage analysis, estimating and customer service
  Aut 150-151 Maintenance and Light Repair Section A
  Perform Engine Oil and Filter Change. Lesson Plan for aut 150-151 Maintenance and Light Repair Section A
  Differentiate between electrical and engine mechanical problems that cause a slow-crank or a no-crank condition
  Remove and replace spark plugs; inspect secondary ignition components for wear and damage
  Diagnose (troubleshoot) incorrect operation of motor-driven accessory circuits; determine necessary action
  Damage analysis, estimating and customer service
  Diagnose (troubleshoot) charging system for causes of undercharge, no-charge, or overcharge conditions
  Remove, inspect, and Re-install generator (alternator)
  Damage analysis, estimating and customer service
  Non-structural analysis and damage repair section I
  Identify and inspect electronic brake control system components; determine necessary action
  Non-structural analysis and damage repair section I
  Inspect and test components and hoses of the evaporative emissions control system; perform necessary action
  Perform exhaust system back-pressure test; determine necessary action
  Measure brake pedal height, travel, and free play (as applicable); determine necessary action
  Diagnose (troubleshoot) incorrect operation of cruise control systems; determine necessary action
  Non-structural analysis and damage repair section I
  Identify type and color code by manufacturer’s vehicle information label
  Diagnose wheel/tire vibration, shimmy, and noise; determine necessary action
  Diagnose strut suspension system noises, body sway, and uneven riding height concerns; determine necessary action
  Aut 186-187/aut 292 Automotive Service Technology Section C/Automotive Special Problems
  Aut 182-183/aut 290 Automotive Service Technology Section A/Automotive Special Problems
  Remove and Install Starter in a Vehicle Lesson Plan for aut 156-157 Maintenance and Light Repair Section D
  Diagnose pressure concerns in a transmission using hydraulic principles
  Aut 182-183/aut 290 Automotive Service Technology Section a /Automotive Special Problems
  Non-structural analysis and damage repair section I
directory CTE ctepa  

---

The database is protected by copyright ©ininet.org 2024
send message