Version
|
Date
|
Changes Made
|
Notes
|
V2.5.0
|
12/01/09
| -
Initial release for McLane and WASP
|
|
V2.5.1
|
12/14/10
| -
Fix BT disconnection issue.
-
Updated USI to v6.3
-
Remove SD card delay upon resume.
|
|
V2.5.2
|
12/16/10
| -
Released from release PC
-
Added generic R/W functions to IOC driver to R/W to physical addresses (now uses SetSerialNumber_v1.2)
-
Added option to disable/enable single hand Fn key shortcuts (default is DISABLED, so must use two hands to use Fn key shortcuts)
To enable single hand Fn key shortcuts, must change HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\FKEYS\FKeySingleHand to “1” and warm boot
|
|
|
01/07/11
| -
Adjusted SD card port power on timing
|
|
V2.5.3
|
12/30/10
| -
Released from release PC
-
Adjust volume control to avoid flat top on sine wave.
-
In PQT, touch point drift after 40,000 punches, change sampling to legacy method and tighten the delta check.
-
In PQT, operation time is 2.5-3hrs with Wifi. Enable 66MHz bus clock for idle to try.
-
Removed Windows Media Player component, Added PNG component to be able to view PNGs from IE
-
Decreased Battery On brightness to 20%, Battery Dim brightness to 10%
|
|
|
01/07/11
| -
Adjusted SD card port power on timing
|
|
V2.5.3 a MCLANE
|
01/24/11
| -
Renamed “Flash Storage” to “Storage Card” to make SD card obsolete for McLane application
-
Added new BootApp.exe utility
-
Disabled DVS
|
|
V2.5.3 b MCLANE
|
01/24/11
| -
“Flash Storage” and “Storage Card” drives are both used
-
Added new BootApp.exe utility
-
Disabled DVS
|
|
QFE Update
|
01/25/11
| -
Updated release PC to WinCEPB60-101231-Product-Update-Rollup-Armv4I.msi
|
|
V2.5.3 c MCLANE
|
02/02/11
| -
Renamed “Flash Storage” to “Storage Card” to make SD card obsolete for McLane application
-
Added new BootApp.exe utility
-
Disabled DVS
-
Disable SD slot by default
|
|
V2.5.4
|
03/11/11 (WASP & McLane)
3/15/11 (ENG, CHS, CHT, JPN)
| -
Disabled DVS
-
Added new BootApp.exe utility
-
Updated timing of CPU power on to address suspend/resume hangup issue
-
Implemented battery smart charging
-
Set default keyboard layout to English
-
Updated Summit Driver to v3.03.08
-
Updated the following according to new BSP from Samsung: OALLIB, POWERBUTTON, DISPLAY, OTG, PLATFORM\COMMON\SRC\SOC\S3C6410_SEC_V1\OAL\INTR
|
|
V2.5.5
|
04/08/11
(WASP)
04/11/11 (ENG)
04/13/11
(McLane)
| -
Fixed PowerUp() hangup issue in HSMMC drivers
|
|
V2.5.6
|
04/21/11 (ENG)
| |
|
V2.5.6
|
04/29/11 (CHS, CHT, JPN)
| -
Fixed PowerUp() hangup issue in HSMMC drivers
-
Added more locale code pages to match the PA968/document that Danny provided
|
|
QFE Update
|
05/09/11
| -
Installed WinCEPB60-110131-2011M01-Armv4I.msi and WinCEPB60-110228-2011M02-Armv4I.msi updates on mr-release PC.
-
Rolled back Image.lib from WinCEPB60-101231-Product-Update-Rollup-Armv4I.msi because it causes problems with video playback
|
|
V2.5.7
|
08/23/11 (ENG, CHS, CHT, JPN)
| -
Added new code for NANDFLASH
-
Adds functionality to access SD card via USB as mass storage device; included utility called “USB connection” that switches between mass storage device and ActiveSync
-
Add complete custom hard key support
-
Remove SMU utility
-
Added registry entry to display import/export button in SCU
-
Added in the file mfcce400.dll
|
|
V2.5.8
|
10/04/11
(ENG, CHS, CHT, JPN)
| -
Change behavior for when battery door is open: cold boot instead of warm boot in the case of emergency shut down; this fixes the blue screen hang up issue
-
Fixed battery status bar
|
|
V2.5.8
|
11/08/11
(WASP)
| -
Added more locale code pages to match the PA968/document that Danny provided
-
Added new code for NANDFLASH
-
Adds functionality to access ONLY SD card (no flash storage) via USB as mass storage device; included utility called “USB connection” that switches between mass storage device and ActiveSync
-
Add complete custom hard key support
-
Remove SMU utility
-
Added registry entry to display import/export button in SCU
-
Added in the file mfcce400.dll
-
Change behavior for when battery door is open: cold boot instead of warm boot in the case of emergency shut down
-
Fixed battery status bar
-
Disables Bluetooth every time the device start, ignores PrevOn flag in registry that remembers previous state of Bluetooth module
|
|
V2.5.9
|
11/15/11
(ENG, CHS, CHT, JPN)
| -
Added command line support for BootMode.exe
-
Added VM OS update support
-
Added BT functions BT_PowerEnable and BT_PowerStatus to SYSIOAPI.dll
|
|
V2.6.0
|
03/05/12
(ENG, CHS, CHT, JPN)
| -
Removed clean boot option from bootmode utility; needs to work with EBOOT v4.4 for WD cold boot to be same as clean boot
-
Changed power button press wait time to 500ms and resume delay time to 6000 ms
-
Updated RTC_YEAR_DATUM (base year) to 2008 which is a multiple of 4 to fix leap year issue
|
|
V2.6.0
|
03/07/12
(McLane)
| -
Added more locale code pages to match the PA968/document that Danny provided
-
Added new code for NANDFLASH
-
Adds functionality to access SD card via USB as mass storage device; included utility called “USB connection” that switches between mass storage device and ActiveSync
-
Add complete custom hard key support
-
Remove SMU utility
-
Added registry entry to display import/export button in SCU
-
Added in the file mfcce400.dll
-
Change behavior for when battery door is open: cold boot instead of warm boot in the case of emergency shut down; this fixes the blue screen hang up issue
-
Added command line support for BootMode.exe
-
Added VM OS update support
-
Added BT functions BT_PowerEnable and BT_PowerStatus to SYSIOAPI.dll
-
Removed clean boot option from bootmode utility; needs to work with EBOOT v4.4 for WD cold boot to be same as clean boot
-
Changed power button press wait time to 500ms and resume delay time to 6000 ms
-
Updated RTC_YEAR_DATUM (base year) to 2008 which is a multiple of 4 to fix leap year issue
|
|
V2.6.0
|
03/07/12
(WASP)
| -
Added command line support for BootMode.exe
-
Added VM OS update support
-
Added BT functions BT_PowerEnable and BT_PowerStatus to SYSIOAPI.dll
-
Removed clean boot option from bootmode utility; needs to work with EBOOT v4.4 for WD cold boot to be same as clean boot
-
Changed power button press wait time to 500ms and resume delay time to 6000 ms
-
Updated RTC_YEAR_DATUM (base year) to 2008 which is a multiple of 4 to fix leap year issue
|
|
V2.6.1
|
05/11/12
| |
|
V2.6.1
|
05/22/12
(CHS, CHT, JPN)
| -
Updated to support Micron NANDFlash Chip
-
Added VBScript support
|
|
