IPad eap-tls configuration Guide



Download 28.35 Kb.
Date29.07.2017
Size28.35 Kb.
#24827



iPad EAP-TLS configuration Guide

© 2010 by Aruba Networks Inc. All rights reserved. All computer programs referred to in this document contain the confidential and intellectual property of Aruba Networks Inc. A released version of this document can be obtained upon request from Aruba Networks document control. No part of this form may be used, copied, disclosed, or transferred to any party without prior written authorization from Aruba Networks Inc. This document is uncontrolled when printed.



Author

Section Revised

Revision Level

Revision

Date

Andreas Zindel

Initial Document creation

1.0

7/23/10







































CONTACT INFORMATION

Comments with regards to this document should be directed to Aruba Technical Marketing.

Table of Contents


Introduction 3

EAP-TLS Configuration 3




Introduction

This document describes how to configure an Apple iPad for EAP-TLS 802.1x authentication. This document does not cover any network side configuration necessary for 802.1x EAP-TLS.



EAP-TLS Configuration


To configure and deploy EAP-TLS with the iPad you must download and install the iPhone Configuration Utility

For Windows http://support.apple.com/kb/dl926

For Mac OS http://support.apple.com/kb/DL851

Once you installed the iPad configuration utility you can configure the iPad for EAP-TLS.

These instructions imply you have access to your organizations Root and Personal Certificate needed for authentication. The root certificate and client certificate must be installed on the PC from which you are configuring the iPad using the iPhone configuration.

Connect your iPad to your PC

Open the iPad configuration Utility

Select Configuration Profiles




Click on New

Select General in the center column




Fill in the fields in the form on the right side


In the center console select Credentials


Select Configure


In the certificate dialog window select your organization’s root certificate and click OK

In the iPhone configuration application click on the + in the upper right corner to add the Client Certificate needed for authentication.



In the certificate dialog window select your client certificate and click OK



In the case your client certificate is password protected for export, the iPhone configuration utility will prompt you to enter this password. You will have to contact your companies IT organization for the password.

Enter the password for the client certificate export and click OK


In the iPhone configuration utility you should see two Certificates now. The first is your organizations ROOT certificate and the second is the client certificate used for authentication.
Select WiFi in the Center column


Click on Configure on the right side

Type the Network Name (SSID) into the Service Set Identifier field and select WPA / WPA2 Enterprise from the Security Type dropdown menu




Select TLS for Accepted EAP Types


Click in Authentication and select the client certificate from the Identity Certificate dropdown menu

Click on Trust and select your CA certificate




Select your iPad on the left side


Select the Configuration Profiles tab on the right side and select Install for the EAP-TLS profile just created


When prompted on the iPad select Install to continue




Select Install Now to continue


Select Done to finish the installation

On the iPad Desktop select Settings




Select General

On the right side select Network




Select Wi-Fi

Select the network SSID to which the iPad should connect. The spinning wheel next to the wireless symbol indicates that the iPad is in the process of connecting to the network. In this example the iPad is initiating a connection to the iPad-Test network.



You will be prompted to enter the connection credentials. Select Mode



In the Mode selection screen first select EAP-TLS and then Enter Password to return to the previous screen

Back at the Enter Password screen select Identity



In the Identity screen first select your Client Certificate and then select Enter Password to go back to the previous screen



Type in the Username exactly as it appears in the Identity name field



When prompted select Accept to validate the Server Certificate to continue to connect to the wireless network



Once you see a check mark in front of the network name and the wireless symbol change color to blue the iPad successfully connected to the wireless network.






© 2007-2010 by Aruba Networks, Inc.


Download 28.35 Kb.

Share with your friends:




The database is protected by copyright ©ininet.org 2024
send message

    Main page