Name and Designation: Dr. Sunil Kumar Singla Assistant Professor

1. 
   Name and Designation: Dr. Sunil Kumar Singla
   

2. 
   Personal Details:
   

• 
  Date of Birth: 03-11-1976
  
• 
  Residential Address: H. No. 39, Type III (New), Thapar university campus
  
• 
  Contact details: Phone 0175-2393396 (o), 0175-2393480 (r), or mobile no./(not mandatory) email: ssingla@thapar.edu, ……….@...........
  

ii) International Association of Engineers and Scientists (IAEST)

iii) International Association of Engineers

Membership Number: 128208

8. Academic Details:

Courses taught UG/ PG level –

Biometrics- Palmprint verification using LabVIEW, LAP Lambert Academic Publishing

i) Member CHIEF TECHNICAL ADVISORY BOARD

• 
  International Journal of Soft Computing and Engineering (IJSCE)
  
• 
  International Journal of Engineering and Advanced Technology (IJEAT)
  
• 
  International Journal of Engineering and Innovative Technology (IJEIT)
  

iii) Guest Editor- International Journal of Electronics Communications and Electrical Engineering  Volume 3 Issue 3.

iv) Member of the expert committee constituted by PTU to evaluate the status of Master of Engineering at BHAI GURDAS INSTITUTE OF ENGINEERING AND TECHNOLOGY.

Conferences/Seminars/Workshops/Tutorial – Organized only

1. 
   Coordinated and organized a two day Continuing Engineering Education Programme (CEEP) Course titled” Virtual Instrumentation and Engineering Practices” during 20-22 December , 2001
   
2. 
   Coordinated and organized a two day Continuing Engineering Education Programme (CEEP) Course titled” Artificial Intelligence, Virtual Instrumentation and their Engineering Applications” during 10-11 March , 2003
   
3. 
   Coordinated and organized a two day Continuing Engineering Education Programme (CEEP) Course titled” Virtual Instrumentation and their Engineering Applications ” during 30-31 October , 2003.
   
4. 
   Coordinated and organized a two day Continuing Engineering Education Programme (CEEP) Course titled” An Introduction to Virtual Instrumentation” during 4-5 November , 2005.
   
5. 
   Coordinated and organized a two day Continuing Engineering Education Programme (CEEP) Course titled” An Introduction to Virtual Instrumentation” during 11-12 November , 2005.
   
6. 
   Coordinated and organized a two day Continuing Engineering Education Programme (CEEP) Course titled” LabVIEW and its Engineering Applications” during 03-04, April , 2008.
   
7. 
   Coordinated and organized a two day Continuing Engineering Education Programme (CEEP) Course titled” Applications of LabVIEW in Engineering” during 03-04, April , 2009.
   
8. 
   Coordinated and organized a six week summer training on ” C, C++, MATLAB and LabVIEW during 06 June-16 July, 2010.
   

• 
  Merit Certificate from Sant Longowal Institute of Engineering & Technology , Longowal for securing second position in merit in Bachelor of Technology in Instrumentation Engineering
  
• 
  Merit Certificate from Technical Teacher’s Training Institute , Chandigarh for securing Ist position in merit in Master of Engineering in Instrumentation & Control Engineering
  
• 
  Appreciation letter from Dean of student affairs of Thapar Institute of Engineering & Technology, Patiala for attaining 10.00 Cumulative Grade Point Average on 10 point scale.
  
• 
  Institute Medal from Thapar Institute of Engineering & Technology, Patiala (Deemed University) for securing the highest Cumulative Grade Point Average in the master of engineering (instrumentation and control Engineering)
  
• 
  Dr. S.P. Luthra Memorial Gold Medal For the best performance among all the students of Master’s degree programme of the Technical Teacher’s Training Institute during the period August 1998- February 2000.
  

• 
  Completed Title, student name, year
  
• 
  Ongoing
  

2014

Sr. No.	Title of thesis	Name of student
1.	Performance analysis of PID controller with different tuning methods	Vibhor Kayshap

2013

Sr. No.	Title of thesis	Name of student
23.	Development of Hand recognition based personal authentication system using LabVIEW	Agam Gupta
22.	Development of Ear based personal authentication system using LabVIEW	Sukhdeep Singh
21.	Performance evaluation of controller schemes using various tunning methods	Rajeev Kumar

2012

Sr. No.	Title of thesis	Name of student
20.	Wavelet based flicker analysis and removal system using LabVIEW	Amrik singh
19.	Comparative study of normalization techniques used for the fusion of different biometric traits	Santosh Kumar
18.	Feature extraction in an Iris based system using independent component analysis	Parul Sethi

2011

Sr. No.	Title of thesis	Name of student
17.	Torque ripple minimization in direct torque control of induction motor using fuzzy logic	Vijayendra kumar
16.	Performance Analysis of Antireflection Coating for Reduction of Losses in Fiber to Fiber Connectors	Virender Kumar Mehla

2010

Sr. No.	Title of thesis	Name of student
15.	Face Recognition based on Wavelet Transform, Principal Component Analysis and Neural Network	Rahul Dev Nigam
14.	Study and Analysis of Patient Monitoring compatibility with LabVIEW	Yatendra Kumar

2009

Sr. No.	Title of thesis	Name of student
13.	OCR based speech recognition system using LabVIEW	Rajiv Kumar Yadav
12.	Palm Print verification using LabVIEW	Vivek Chaudhary
11.	ECG based Biometric verification system using LabVIEW	Ankit Sharma
10.	Speaker Identification system Using LabVIEW	Manish Sharma

2008

Sr. No.	Title of thesis	Name of student
9.	A face recognition system using Neural Networks	Sourabh Gupta
8.	Design and implementation of Multivariable control system in refinery	Gaurav Mittal

2006

Sr. No.	Title of thesis	Name of student
7.	Disease Diagnostic system using LabVIEW	Deepanshu Goyal
6.	Design and development of a voice based machine control at remote location	Jasleen Kaur
5.	Effect of finite word length on FIR filter implemented on 8052 microcontroller	Aman
4.	Analyssis of human monitoring system using LabVIEW	Parshant
3.	Design and development of microcontroller based temperature and humidity controller for infant incubator	Varuninder singh

2005

Sr. No.	Title of thesis	Name of student
2.	Automatic Speaker recognition System Using LabVIEW	Vaibhab Sharma

2002

Sr. No.	Title of thesis	Name of student
1.	Design and Development of Fuzzy logic based disease Diagnostic system for anemia	Parveen Gupta

12. Publications:

Publication in SCI Journal

2014

1. 
   An expert lecture on “Virtual Instrumentation Softwares including LabVIEW ” in the short term course titled “virtual Instrumentation” organized by the department of Electrical Engineering during 28 july –1^st August 2003 at TTTI, Chandigarh
   
2. 
   An Expert lecture on “ Biometric – Need of the hour ” at AICTE & ISTE sponsored short term course organized by the department of Electrical & Instrumentation Engineering on March 24^th ,2004 at SLIET , Longowal
   
3. 
   An expert lecture on “Programming in LabVIEW ” in the short term course titled “virtual Instrumentation” organized by the department of Electrical Engineering during 3^rd Jan – 7^th Jan 2005 at TTTI, Chandigarh
   
4. 
   An expert lecture on “Implementation of DSP in LabVIEW ” in the short term course titled “Digital Signal Processing – Fundamentals , Algorithms and applications” organized by the department of Electronics and Communication Engineering during 3^rd – 4^th March 2005 at TIET, Patiala.
   
5. 
   An expert lecture on “Concepts of Virtual Instrumentation ” on 4^th Aug in the AICTE sponsored summer school on “Virtual Instrumentation” organized by the department of Electrical Engineering during 4^th Aug – 8^th Aug 2008 at NITTTR, Chandigarh.
   
6. 
   An expert lecture on “Data acquisition using LabVIEW ” on 6^th Aug in the AICTE sponsored summer school on “Virtual Instrumentation” organized by the department of Electrical Engineering during 4^th Aug – 8^th Aug 2008 at NITTTR, Chandigarh.
   
7. 
   An expert lecture on “Applications of VI in Industries” on 28th July in the AICTE sponsored programme on Automation in industries At NITTR, chandigarh July 2009.
   
8. 
   An expert lecture on “Biometric and its Applications” on 11th Jan. in the Faculty development programme on Introduction to MATLAB and its Applications in Engineering” organized by Department of Electronics and Communication Engineering during 9th January to 13th January, 2012.
   
9. 
   An expert lecture on “2-D and 3-D Graphics, Multiple Plots, Axis Scaling and Printing Graphics” on 11th Jan. in the Faculty development programme on Introduction to MATLAB and its Applications in Engineering” organized by Department of Electronics and Communication Engineering during 9th January to 13th January, 2012.