Sip firmware Release 1 for ip phone 1140e administration

Note 2: ENABLE_PRACK is provisioned after user logout NO

Download 1.47 Mb.

View original pdf

Page	21/76
Date	14.08.2023
Size	1.47 Mb.
	#61855

1 ... 17 18 19 20 21 22 23 24 ... 76

NN43113-300 02.05 1140E Adm

Note 2: ENABLE_PRACK is provisioned after user logout NO - disables PRACK and is the default value YES - enables PRACK.
•
PROXY_CHECKING YES | NO enables and disables extra security checking when incoming requests are sent to the IP Phone E. The
IP Phone E with SIP Firmware always sends requests through an outgoing proxy. However, it is possible, through this configuration, to be able to accept an incoming request directly or through an incoming proxy YES - means that the request must come directly from the proxy server. YES is the default to enable proxy checking NO - means the request can be sent directly to the IP Phone 1140E.
(NO is only suitable in a few situations).
•
ENABLE_BT YES | NO is a flag to enable and disable Bluetooth support in the IP Phone E YES - enables Bluetooth NO - disables Bluetooth. The default is NO.
Note that the IP Phone E hardware does not support Bluetooth and this command is ignored.
•
DEF_AUDIO_QUALITY Low | Medium | High is a command used for setting the default audio quality used for each new call. Audio quality can be changed when the call is active. If this command is not present in the configuration file, the IP Phone E uses High quality as its default value. The possible parameters for this command are High,
Medium, and Low. If any other parameter is entered or these commands are misspelled, the IP Phone E uses High as the default setting.
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

Create the device configuration file on the provisioning server
39
The following codecs are used for each selection Low - G ptime 30.
— Medium - G ptime 30.
— High - G ptime 20.
•
AUTH_METHOD [AUTH | AUTH_INT] is used to configure the SIP
authentication method AUTH - only authenticates (username/password)
— AUTH_INT - authentication plus integrity checking (an MD hash of the entity is also computed and checked).

Download 1.47 Mb.

Share with your friends:

1 ... 17 18 19 20 21 22 23 24 ... 76