The majority of the cfao create neutral files including of the instructions cn credits for the machines. Much is in called binary code Cl-dated, or in an adapted ascii format of language apt
Download 357.47 Kb.
|
C1=CIRCLE/41.6,-1.0681,14.7351,3 L1=LINE/41.6,-1.0681,14.7351,38.6,-1.0681,14.7351 INDIRV/-1,0,0 TLON,GOFWD/C1,ON,L1 V-25 Chapter
6 Attention the declaration of orders CIRCLE and LINE must be done before l' call by TLON, GOFWD. It n' is thus not possible to define at the beginning of code APT all references CICRLE & LINE. FROM :D' definition; a starting point REWIND :D' definition; an instruction of defect SELECT :Selection d' an origin (left the code of the G54 type for example). Exempleof code : SELECT/54 MODE :D' definition; an operating process. Exemple ofcode : MODE/ INCHES MM XYPLAN YZPLAN ZXPLAN
ABSOL INCR
ORIGIN :D' definition; an origin (either with call d' a code G FIXTUR (G54, G55. ) is with value of l' origin DATUM X, Y, Z Exemple de code : ORIGIN / FIXTUR, 2 ===> G55 ORIGIN / DATUM, 1.0, 2.5, 3.9
CLAMP :D' definition; year instruction off rblocage d' year axis Example of code: CLAMP / ON / OFF / AAXIS, ON / BAXIS, OFF GOHOME :Return at the origins. L' one can specify on which axes can be made return. Example of code: GOHOME / XAXIS, YAXIS, ZAXIS UNITS :Order definition of units G70/G71. Example of code : UNITS/MM PPFUN: Recognized but untreated function. MCS :Recognized but untreated function. AUXFUN :D' definition; an auxiliary function (partner with a code M) V-26 Chapter
PREFUN :D' definition; a preparatory function (partner with a code G) 6 Codes for the fixed cycles CYCLE : définition of cycle fixes . Example ofcode : CYCLE CYCLE/DRILL : Percage, pointage .CYCLE/DRILL,30.4,6451.6,MMPM,2.54 CYCLE/TAP : taraudage .CYCLE/TAP,30.4,6451.6,MMPM,2.54 CYCLE/REAM : Alesage .CYCLE/REAM,30.4,6451.6,MMPM,2.54 CYCLE/MILL : percage par hélicoïdale .CYCLE/MILL,30.4,6451.6,MMPM,2.54 CYCLE/BORE : percage .CYCLE/BORE,30.4,6451.6,MMPM,2.54 CYCLE/FACE : surfacage .CYCLE/FACE,30.4,6451.6,MMPM,2.54,100 CYCLE/BORE,DWELL: percage avec temporisation .CYCLE/BORE,DWELL,30.4,6451.6,MMPM,2.54,100 CYCLE/CSINK : chamfreinage .CYCLE/CSINK,30.0,30.0,6451.6,MMPM,2.54 CYCLE/DEEPCL : percageprofond .CYCLE/DEEPCL,30.4,6451.6,MMPM,2.54,INCR,10.0,10.0 CYCLE/DEEPBK : cycle brisecopeaux .CYCLE/DEEPBK,30.4,6451.6,MMPM,2.54,INCR,10.0,10.0 CYCLE/OFF : instructions de fin de cycle .CYCLE/OFF Code CYCLE/OFF CYCLE/DEEPBK Exemples CYCLE/OFF CYCLE/DEEPBK,30.4,6451.6,M MPM,2.54,INCR,10.0,10.0 Description Instructions of end of cycle. Cycle breaks chips
Chapter
7 VI MODIFICATIONS OF THE VERSION Version 0.0.8 Date : 10/12/2006 TailleExécutable : 740 Ko (757 760 octets) Corrections Corrections on management Codes CIRCLE in G17 plan New functions Integration, of new codes management speed. Version 0.2.x Date : 10/11/2010 TailleExécutable : 708 Ko (724 992 octets) New functions Test of the version of files PC Version 0.2.x Date : 10/11/2010 TailleExécutable : 708 Ko (724 992 octets) New functions Management of the Heidenhain exits Version 0.2.18 & 0.2.19 Date : 9/02/2011 TailleExécutable : 760 Ko (778 240 octets) New functions Management of codes APT AUXFUN and CLAMP Addition option for exit corrector tool at the end of the line (heidenhain) Version 0.3.x Date : 10/02/2011 TailleExécutable : 760 Ko (778 240 octets) New functions Management of codes GODLTA with displacement in this case into relative (G91) Version 0.3.2 Date : 10/02/2011 TailleExécutable : 760 Ko (778 240 octets) New functions Management codes PREFUN Gestion of code GOHOME Corrections The exit of code TLAXIS generates an instruction of the plane type standard G17, G18… VI-28 Chapter
Version 0.3.3 Date : 17/03/2011 TailleExécutable : 772 Ko 7 New functions Addition of variables PP_DATE and PP_TIME Version 0.3.4 Date : 27/04/2011 TailleExécutable : 784 Ko New functions Management of the code MODE Corrections Management of codes CYCLES SEED-PLANTING DRILL and DEEP according to example CATIA APT VERSION Version 0.4.0 Date : 28/04/2011 TailleExécutable : 784 Ko Corrections Modification on code GOHOME Version 0.4.1 à 0.4.5 Date : 28/05/2011 TailleExécutable : 784 Ko New functions Management of code TLON, GOFWD with notation of codes CIRCLE and LINE in reference. Corrections Correction of several minor problems of second reading and correction on treatment codes INDRIV for direction of the circle. Version 0.4.6 Date : 28/08/2011 TailleExécutable : 816 Ko New functions Possibility of defining order of exit of axes XYZ ABC and the code G Corrections On calculation B & C for standard machine 5 axes Gantry B& C VI-29 Chapter
8 I-1 I-1 I-1 I-1 I-2 II-3 II-4 II-4 II-4 II-5
II-5 III-6 III-6 III-6
III-6 III-6
III-6 III-6
III-6 III-6
III-6 III-7 III-7
III-7 III-7
III-7 III-7 III-7
III-9 IV-10 IV-10 30 I SOFTWARE WINPOST GENERAL INFORMATION. Emulation of controllers CNC & Support codes-G LIMIT OF GUARANTEE SYMBOLS USE IN THIS HANDBOOK II USE OF THE SOFTWARE To charge a POST-PROCESSOR To charge a file APT To convert file APT into File ISO Tree of information Stagnation point III DESCRIPTION OF THE FUNCTIONS File To open file APT To save ISO File Selection post-processor To open ISO File To leave TREATMENT To convert from zone text To convert directly Options Definition post-processor Option To export Log STRONG CURRENT Log By the way Version Bar tools IV TO CONFIGURE A NEW POST-PROCESSOR PRINCIPLE Chapter
Format of a variable List Variables available GENERAL AXES STITCH & SPEED CODE G Particular case of the exit of the circular interpolations CODE M TOOL 5AXES CYCLES FIXES DEBUT/FIN FILE COLOR Color text PARTICULAR INSTRUCTIONS V DEFINITION OF CODES APT 8 IV-10 IV-1
IV-4 IV-6 IV-8 IV-10 IV-11
IV-12 IV-14 IV-16 IV-18 IV-19 IV-20 IV-20
IV-22 V-24 V-24 V-24 V-27
VI-28 SUMMARY OF FUNCTIONS APT Treated codes APT Codes for the fixed cycles VI MODIFICATIONS OF THE VERSION 31 Download 357.47 Kb. Share with your friends:
|