Vcc-wb4000 p architect & Engineer Specification

Download 21.98 Kb.
Size21.98 Kb.

VCC-WB4000 P Architect & Engineer Specification

Bid Spec

  1. Description

The network video camera shall be a Sanyo Model number VCC-WB4000P or equivalent. The camera described shall be an industrial grade, Day/Night IP addressable network video camera.

  1. Bid Specification

The network camera shall incorporate an interline transfer method 1/3” 410,000 pixel charge coupled device (CCD) with 768 H x 494 V, effective pixels. The network video camera shall have Day/ Night function with a minimum light requirement of 0.6 Lux at (F1.2) in color mode, and 0.03 Lux (F1.2) in Black & White mode. The video camera shall have 5 steps of brightness control. The video camera shall have an available backlight compensation circuit (Off/ Multi/Center). The camera shall have white balance (Auto/ Indoor/ Outdoor/ Manual), Gain control
(Auto/ Off), Gamma (0.3/ 0.45/ 0.6/ 0.8/ 1) and Electronic Shutter (1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000). The camera shall have an electronic iris (ON/ OFF, 1/60-1/10000 sec.), and a DC drive 4 pin connector for auto iris lens. The camera shall accept a CS mount lens, flange back adjustment 12.5mm +0.5mm adjustment. The camera shall have built-in motion detection for alarming. The camera shall have 1 external alarm connector in: 1(NO/NC), and 1 alarm out: 1(with motion detector). Camera resolutions shall be 720 x 480, 720 x 240, 640 x 480, 320 x 240, 160 x 120 pixels. The image compression method shall be JPEG2000, image compression ratio 5 steps (more than 5KB). The camera shall have a frame rate maximum of 30 fps (640 x 480). The camera shall have 1 BNC composite video output (PAL). The camera shall have a built-in 10Base-T / 100Base-TX (RJ45) Ethernet interface, RS232C (D-SUB 9-pin), a PC Card TypeII slot (PCMCIA, 5V power supply only) for CF type memory expansion or wireless LAN card (IEEE 802.11b), and an internal 16MB pre-post alarm buffer. The camera shall use TCP/IP, PPP, FTP, and HTTP network protocols. Required software shall be JPEG2000 plug-in for Internet Explorer. The camera shall support multi user access for up to 16 users. The camera shall have dimensions of 136 L x 59 H x 85 W mm, and weigh no more than 480grams. Power requirements for the video camera shall be 12V DC or 24V AC, 60 Hz and shall consume approx. 10 Watts. The video camera shall be constructed of a durable metal cabinet and shall be magnetic and electrostatically shielded. The camera shall feature solid-state components to resist shock and vibration. The video camera shall be ISO9001 certified.

  1. Minimum Performance Specifications




Image sensor

1/3" 410,000 pixel CCD, interline transfer method

Effective pixels

768(H) x 494(V)

Minimum object illumination

0.6 Lux at (F1.2) color mode, 0.03 Lux (F1.2) in B&W mode


5 steps

Backlight compensation

Off/ Multi/ Center

White balance

Auto/ Indoor/ Outdoor/ Manual

Gain control

Auto/ Off


0.3/ 0.45/ 0.6/ 0.8/ 1

Electronic shutter

1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000

Lens mount

CS mount

Flange back

12.5mm +0.5mm adjustment

Electronic iris

ON/ OFF, 1/60-1/10000 sec.

Auto iris

DC drive, 4-pin

External alarm

Alarm in: 1 (NO/NC) Alarm out: 1 (with motion detector)


720x480, 720x240, 640x480, 320x240,160x120 pixels

Image compression method


Image compression ratio

5 steps (more than 5KB)

Frame rate

Max. 30 fps (640x480 pixels)

Monitor output

1 (composite, PAL)

Other functions

Color/ Monochrome imaging

Ethernet interface

10Base-T / 100Base-TX (RJ45)


D-SUB 9-pin

PC card slot

PCMCIA Type II (5V power supply only)

Pre-post alarm buffer


Network protocol



Browser plug-in (Internet Explorer compatible)

Operating environment

Temperature: -10°C to 50°C, [14°F to 122°F], Humidity: within 90% RH

Power requirement

24V AC or 12V DC

Power consumption


Weight (approx.)

480g (16.9oz)

Download 21.98 Kb.

Share with your friends:

The database is protected by copyright © 2022
send message

    Main page