Welcome to impact impact version: 14. 5
Download 10.31 Kb.
|
| Welcome to iMPACT
iMPACT Version: 14.5 // *** BATCH CMD : setMode -bs // *** BATCH CMD : setMode -bs // *** BATCH CMD : setMode -bs // *** BATCH CMD : setMode -bs GUI --- Auto connect to cable... // *** BATCH CMD : setCable -port auto INFO:iMPACT - Connecting to TCF agent... INFO:iMPACT - Digilent Plugin: Plugin Version: 2.4.4 INFO:iMPACT - Digilent Plugin: no JTAG device was found. AutoDetecting cable. Please wait. *** WARNING ***: When port is set to auto detect mode, cable speed is set to default 6 MHz regardless of explicit arguments supplied for setting the baud rates PROGRESS_START - Starting Operation. Connecting to cable (Usb Port - USB21). Checking cable driver. Driver file xusb_xp2.sys found. Driver version: src=2301, dest=2301. Driver windrvr6.sys version = 10.2.1.0. WinDriver v10.21 Jungo (c) 1997 - 2010 Build Date: Aug 31 2010 x86_64 64bit SYS 14:14:44, version = 1021. Cable PID = 0008. Max current requested during enumeration is 300 mA. Type = 0x0005. write (count, cmdBuffer, dataBuffer) failed C0000004. Cable Type = 3, Revision = 0. Setting cable speed to 6 MHz. Cable connection established. Firmware version = 2301. File version of C:/Xilinx/14.5/ISE_DS/ISE/data/xusb_xp2.hex = 2401. Firmware hex file version = 2401. Downloading C:/Xilinx/14.5/ISE_DS/ISE/data/xusb_xp2.hex. Downloaded firmware version = 2401. PLD file version = 200Dh. PLD version = 200Dh. PROGRESS_END - End Operation. Elapsed time = 0 sec. Type = 0x0005. ESN option: 0000151045D401. Attempting to identify devices in the boundary-scan chain configuration... INFO:iMPACT - Current time: 8/23/2013 9:08:43 AM // *** BATCH CMD : Identify -inferir PROGRESS_START - Starting Operation. Identifying chain contents...'0': : Manufacturer's ID = Xilinx xc6slx4, Version : 2 INFO:iMPACT:1777 - Reading C:/Xilinx/14.5/ISE_DS/ISE/spartan6/data/xc6slx4.bsd... INFO:iMPACT:501 - '1': Added Device xc6slx4 successfully. ---------------------------------------------------------------------- ---------------------------------------------------------------------- done.
PROGRESS_END - End Operation. Elapsed time = 1 sec. // *** BATCH CMD : identifyMPM // *** BATCH CMD : assignFile -p 1 -file "N:/my doc/428cr/FPGA/LEDTEST/Drive428x_05/FPGA_GDCB_05/multilevel_drive_top.bit" '1': Loading file 'N:/my doc/428cr/FPGA/LEDTEST/Drive428x_05/FPGA_GDCB_05/multilevel_drive_top.bit' ... done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory, but the original bitstream file remains unchanged. UserID read from the bitstream file = 0xFFFFFFFF. Data width read from the bitstream file = 1. INFO:iMPACT:501 - '1': Added Device xc6slx4 successfully. ---------------------------------------------------------------------- ---------------------------------------------------------------------- Selected part: M25P40 // *** BATCH CMD : attachflash -position 1 -spi "M25P40" Unprotect sectors: FALSE // *** BATCH CMD : assignfiletoattachedflash -position 1 -file "N:/my doc/428cr/FPGA/LEDTEST/Drive428x_05/FPGA_GDCB_05/Untitled.mcs" // *** BATCH CMD : attachflash -position 1 -spi "M25P40" INFO:iMPACT - Current time: 8/23/2013 9:10:42 AM // *** BATCH CMD : Program -p 1 -dataWidth 1 -spionly -e -v -loadfpga PROGRESS_START - Starting Operation. Maximum TCK operating frequency for this device chain: 25000000. Validating chain... Boundary-scan chain validated successfully. '1': SPI access core not detected. SPI access core will be downloaded to the device to enable operations. INFO:iMPACT - Downloading core file C:/Xilinx/14.5/ISE_DS/ISE/spartan6/data/xc6slx4_spi.cor. '1': Downloading core... LCK_cycle = NoWait. LCK cycle: NoWait done.
'1': Reading status register contents... INFO:iMPACT:2219 - Status register values: INFO:iMPACT - 0011 1100 1110 1100 INFO:iMPACT:2492 - '1': Completed downloading core to device. '1': IDCODE is '12' (in hex). '1': ID Check passed. '1': IDCODE is '12' (in hex). '1': ID Check passed. '1': Erasing Device. '1': Using Sector Erase. '1': Programming Flash. '1': Reading device contents... done. '1': Verification completed. '1':Programming in x1 mode. '1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings. INFO:iMPACT - '1': Flash was not programmed successfully. PROGRESS_END - End Operation. Elapsed time = 125 sec. Directory: xlnx -> attachments -> xlnx -> Spartan Spartan -> Thanks to pratham. The Impact cable problem has been solved xlnx -> Log details Download 10.31 Kb. Share with your friends:
|