Wssc systems inspection group materials checklist
Date 02.02.2018 Size 193.35 Kb. #39237
WATER MATERIALS BOXES Curb Valve
BRASS FITTINGS
(For flared, compression, or corporation stop threaded ends, Lee and Hays not approved)
COPPER PIPE
Ductile Iron, MJ, and Push-On, AWWA C151, 3” through 36” diameter
Systems/Griffin Pipe Products/McWane Cast Iron Pipe/U.S. Pipe and Foundry
FITTINGS
FIRE HYDRANTS
Meter Approved Manufacturers: Meter Box Covers (except 21” diameter double meter frame)/Ford Meter Box/Bingham and Taylor (single and double meter covers only)
METER HOUSINGS
Concrete Pipe Approved Manufacturers: Hanson/Hydro Conduit
Vitrified Clay Pipe Approved Manufacturers: Logan Clay/Superior Clay
Polyethylene Approved Manufacturers: Mid-States Plastics
RESTRAINER GLANDS
Wedge Action Approved Manufacturers: EBAA Iron/Uni Flange/Romac
WATER SERVICE SADDLES 4" and above CIP and DIP with AWWA corporation stop inlet thread
Approved Manufacturers and Models: Ford (Model F202B double strap), Mueller (BR2B Series double strap), Smith Blair (Model 323 Series double strap), A.Y. McDonald (Model 3825 Series double strap)
SLEEVES,TAPPING, MJ Approved Manufacturers and Models: American (Series 2800C), Clow (Figure No. F5205), Mueller (Style No. H-615-24, 4"-24"), Tyler (6"-12" only), US Pipe & Foundry (Type No. 9)
STOPS, CORPORATION Approved Manufacturers and Models (Ball type, 3/4"-2"): A.Y. McDonald (Cat. No. 4701B), Ford (Cat. No. FB600), Cambridge (Cat. No. 301), Mueller (Cat. No. B25000); (Plug Type, 1-1/4" only, allowed but not preferred): A.Y. McDonald (Cat. No. 4701), Mueller (Cat. No. H-15000)
STOPS, CURB
TAPE, DETECTABLE
TAPE, RESTRAINED
VALVES
Gate, AWWA C500 and C509 Approved Manufacturers: American Flow Control/Clow Valve/Kennedy Valve/M&H Valve/Mueller/Patterson Pump/U.S. Pipe and Foundry/Stockham Valves
Tapping, AWWA C500 and C509 Approved Manufacturers: American Flow Control/Clow Valve/Kennedy Valve/M&H Valve/Mueller/Patterson Pump/U.S. Pipe and Foundry
VAULTS, PRECAST CONCRETE
SEWER MATERIALS
BENTONITE
CLEANOUT BOXES
FITTINGS
Concrete Approved Manufacturers: Hanson/HydroConduit
PVC, ASTM D3034, 4”–15” Approved Manufacturers: Colonial Engineering/GPK/Harco/Freedom Plastics/JM/Multifittings/Plastic Trends/Vassallo/Nyloplast
FLEXIBLE PVC ADAPTORS
Joint Sealer
FLEXIBLE GASKETS, PIPE TO MANHOLE CONNECTORS
FRAMES & COVERS
Manhole Approved Manufacturers: East Jordan Iron Works/Neenah Foundry/Capitol Foundry (22" bolt down only)
GRADE RINGS
MANHOLES
PIPE
PVC Sanitary Sewer, Gravity ASTM D3034, 4” – 15”
Approved Manufacturers: Charlotte Pipe/ETI/JM/Ipex, Diamond Plastics Corp
ASTM F679, 18” – 27”
Approved Manufacturers: Ipex, Diamond Plastics Corp
ASTM F794
Approved Manufacturers: ETI Ultra Rib 18”-30”/ETI Ultra Corr 24"-36"/Ipex Ultra rib 18”-24”
ASTM, F1803
Approved Manufacturers: Diamond Plastics Corp 30”,36”,42”, & 48”/ Lamson Vylon 21”-48”
PVC Sanitary Pressure Sewer Gasketed Joint
Approved Manufacturers: JM/Ipex/Diamond
Solvent Cement Joint
Approved Manufacturers: American Pipe and Plastics/Charlotte Pipe/Eslon/LCP/Ipex
Threaded Joint
Approved Manufacturers: Eslon/LCP/Charlotte
Continue PVC Sanitary Pressure Sewer
Concrete Approved Manufacturers: Hanson/HydroConduit
TAPE, DETECTABLE Approved Manufacturers: Empire Level (Magnatec)/Lineguard (Type III )/Pro-Line Safety Products (Type A Double Safe, Product No. P5012/Reef Industries)
CERTIFICATION STATEMENT: By this submittal , I hereby represent that I have checked and coordinated each item herein with other applicable approved drawings and all Contract and Permit requirements.
COMPANY NAME:
DATE:
OFFICER NAME, POSITION [printed]:
OFFICER SIGNATURE:
System Extension Permit
JANUARY 2006
Share with your friends:
The database is protected by copyright ©ininet.org 2024
send message
