User Zone Identification Message

2.6.2.2.9 User Zone Identification Message

The mobile station shall store the following parameters:

• Configuration message sequence number (CONFIG_MSG_SEQ_s = CONFIG_MSG_SEQ_r, USER_ZONE_ID_MSG_SEQ_s = CONFIG_MSG_SEQ_r)

• UZ_EXIT_RCVD_s = UZ_EXIT_r

The mobile station shall set NUM_UZID_s to the number of User Zones contained in the User Zone Identification Message.

For each User Zone contained in the User Zone Identification Message, the mobile station shall perform the following:

• Set the UZID field of UZ_REC(i) to the i^th occurrence of UZID_r.

• Set the UZ_REV field of the UZ_REC(i) to the i^th occurrence of UZ_REV_r.

• Set the TEMP_SUB field of the UZ_REC(i) to the i^th occurrence of TEMP_SUB_r.

2.6.2.2.10 Private Neighbor List Message

The mobile station shall store the following parameters:

• Configuration message sequence number (CONFIG_MSG_SEQ_s = CONFIG_MSG_SEQ_r, PRI_NGHBR_LST_MSG_SEQ_s = CONFIG_MSG_SEQ_r)

• Common configuration included indicator (COMMON_INCL_s = COMMON_INCL_r)

The mobile station shall set NUM_PRI_NGHBR_s to the number of Private Neighbor base stations contained in the Private Neighbor List Message.

For each Private Neighbor base station contained in the Private Neighbor List Message the mobile station shall perform the following:

• Set the SRCH_WIN_PRI_NGHBR field of PRI_NGHBR_REC(i) to SRCH_WIN_PN_r.

• Set the SID field of PRI_NGHBR_REC(i) to the i^th occurrence SID_r.

• Set the NID field of PRI_NGHBR_REC(i) to the i^th occurrence NID_r.

• Set the PRI_NGHBR_PN field of PRI_NGHBR_REC(i) to the i^th occurrence PRI_NGHBR_PN_r.

• If COMMON_INCL_r is equal to ‘1’, then the mobile station shall:

– Set the BAND_CLASS field of PRI_NGHBR_REC(i) to COMMON_BAND_CLASS_r.

– Set the NGHBR_FREQ field of PRI_NGHBR_REC(i) to COMMON_NGHBR_FREQ_r.

• If COMMON_INCL_r is equal to ‘0’, then the mobile station shall:

• 
  Set the BAND_CLASS field of PRI_NGHBR_REC(i) to the i^th occurrence of BAND_CLASS_r.
  
• 
  Set the NGHBR_FREQ field of PRI_NGHBR_REC(i) to the i^th occurrence of NGHBR_FREQ_r.
  

• If i^th occurrence of UZID_INCL_r is equal to ‘1’, then the mobile station shall set the PS_NUM_UZID field of PRI_NGHBR_REC(i) to the NUM_UZID_r associated with the i^th occurrence of UZID_INCL_r.

• For each User Zone supported by the i^th private system, the mobile station shall perform the following:

• 
  Set the PS_UZID(j) field of PRI_NGHBR_REC(i) to the j^th occurrence of UZID_r.
  
• 
  Set the PS_UZ_REV(j) field of PRI_NGHBR_REC(i) to the j^th occurrence of UZ_REV_r.
  
• 
  Set the PS_TEMP_SUB(j) field of PRI_NGHBR_REC(i) to the j^th occurrence of TEMP_SUB_r.
  

2.6.2.2.11 Extended Global Service Redirection Message

Whenever an Extended Global Service Redirection Message is received on the Paging Channel or Primary Broadcast Control Channel, the configuration message sequence number, CONFIG_MSG_SEQ_r, shall be compared to that stored in EXT_GLOB_SERV_REDIR_MSG_SEQ_s. If the comparison results in a match, the mobile station may ignore the message. If the comparison results in a mismatch, the mobile station shall store the following parameters:

• Configuration message sequence number (CONFIG_MSG_SEQ_s = CONFIG_MSG_SEQ_r, GLOB_SERV_REDIR_MSG_SEQ_s= CONFIG_MSG_SEQ_r, EXT_GLOB_SERV_REDIR_MSG_SEQ_s= CONFIG_MSG_SEQ_r)

The mobile station shall perform the following:

• The mobile station shall set (RETURN_IF_FAIL_s = RETURN_IF_FAIL_r), TEMP_TMSI_CODE to TMSI_CODE_s-p, and clear the REDIRECT_REC_LIST. For i =1 to (NUM_ADD_RECORD_r + 1), the mobile station shall perform the following:

 If all the following conditions are satisfied from the i^th redirection record:

• 
  The subfield corresponding to the access overload class, ACCOLC_p, of the mobile station is set equal to ‘1’ in the REDIRECT_ACCOLC_r field or ADD_REDIRECT_ACCOLC_r of the i^th redirection record.
  

• 
  MOB_P_REV_p is in the redirection mobile protocol revision range associated with the i^th redirection record (REDIRECT_P_REV_INCL_r = ‘1’ and EXCL_P_REV_IND_r = ‘0’, and (REDIRECT_P_MIN_{r } MOB_P_REV_p  REDIRECT_P_MAX_r) where i is equal to 1).
  

• 
  MOB_P_REV_p is not in any of the excluded mobile protocol revision range associated with the i^th redirection record (REDIRECT_P_REV_INCL_r = ‘1’ and EXCL_P_REV_IND_r = ‘1’ and (MOB_P_REV_p  REDIRECT_P_MIN_r or MOB_P_REV_p  REDIRECT_P_MAX_r))_.
  

• 
  Type of redirection as specified by RECORD_TYPE_r (i is equal to 1) or ADD_RECORD_TYPE_r is supported.
  

• 
  BAND_CLASS_r is supported (RECORD_TYPE_r = ‘00000010’ or ADD_RECORD_TYPE_r = ‘00000010’).
  

• 
  At least one of the CDMA_CHAN_r is supported for at least one band subclass (when included) corresponding to REDIRECT_SUBCLASS_r = ‘1’. (RECORD_TYPE_r = ‘00000010’ or ADD_RECORD_TYPE_r = ‘00000010’).
  

then mobile station shall store the following parameters from the redirection record:

• 
  Set DELETE_TMSI field of REDIRECT_REC_LIST[j] to DELETE_TMSI_r (i is equal to 1) or ADD_DELETE_TMSI_r, where j (i.e., the initial j value is set to 0) is incremented by 1 whenever the i^th redirection record satisfies the redirection record selection conditions above.
  

• 
  Set REDIRECT_REC_LIST[j] to the i^th redirection record from the received message.
  

• 
  Set RECORD_TYPE field of REDIRECT_REC_LIST[j] to RECORD_TYPE_r (i is equal to 1) or ADD_RECORD_TYPE_r.
  

• 
  If RECORD_TYPE_r = ‘00000001’ (i is equal to 1) or ADD_RECORD_TYPE_r = ‘00000001’, the mobile station shall:
  

• 
  Set CDMA_MODE_s to ‘1’
  
• 
  Set DIGITAL_REG field of REDIRECT_REC_LIST[j] to ‘00000000’.
  
• 
  Set MAX_REDIRECT_DELAY field of REDIRECT_REC_LIST[j] to MAX_REDIRECT_DELAY_r.
  

• 
  If LAST_SEARCH_RECORD_IND_r or ADD_LAST_SEARCH_RECORD_IND_r is equal to ‘1’, the mobile station shall ignore the rest of the message.
  

• If REDIRECT_REC_LIST[j] is not empty, the mobile station shall enter the System Determination Substate of the Mobile Station Initialization State with a redirection indication (see 2.6.1.1); otherwise, the mobile station shall ignore the Extended Global Service Redirection Message.

Directory: TSGC -> Working
Working -> 2. section (Continued) 6 Call Layer 3 Processing
Working -> 3gpp2 tsg-c wg 2 swg 3 meeting #40 Meeting Summary
Working -> C14-20050516-007 3gpp2 swg 4 title
Working -> Radiocommunication Study Groups

Download 3.74 Mb.

Share with your friends: