Automotive industry standard


Table 18 of AIS-007 (Revision 5)



Download 5.58 Mb.
Page15/19
Date28.05.2018
Size5.58 Mb.
#50732
1   ...   11   12   13   14   15   16   17   18   19


Table 18 of AIS-007 (Revision 5)
LIST OF COMPONENT TEST REPORTS / CERTIFICATES FOR

AGRICULTURAL TRACTORS / CONSTRUCTION EQUIPMENT VEHICLES


Rule No.

Subject

Test Report Nos.

If certificate is not available likely date of submission of test report

100

Safety Glass


  1. Windscreen

  2. Side

  3. Rear

(For Construction Equipment Vehicles)







104 A
Reflex Reflector




  1. White, Front

  2. Amber, side

  3. Red, Rear



Retro Reflective Tape or Paint






104B(2)
Reflex Reflector

  1. Rear, Red







119

Horns

Horn Installation






124(A)1

Automotive Lamps

Bulbs used for:



  1. Head light main & dip.

  2. Parking light

  3. Direction indicator lamp

  4. Tail lamp

  5. Reversing lamp

  6. Stop lamp

  7. Rear registration mark indicating lamp

  8. Top light







124A(2)

Lighting Signalling & Indicating Systems:

Head Light:

Fog Light:

Rear Licence Plate Light:

Rear Position Light:

Tail Light:

Stop Light:

Directional Indicator Light:

Front :

Rear : Side :










Table 18 of AIS-007 (Revision 5)


Rule No.

Subject

Test Report Nos.

If certificate is not available likely date of submission of test report




Parking Light: Reversing Light: High Mounted Stop Light:

Rear Warning Triangle ( Slow moving emblem)




















































124A(3)

Hydraulic Brake Hose







124A(4)

Hydraulic Brake Fluid







124A(5)

Tow Hook







124A(6)

Fuel Tank







124A(7)

Wheel Nuts & Hub Caps







Note :

  1. Please enclose test report copies wherever required.

  2. In case samples are submitted to the testing agency for testing, please provide reference docket no.


Table 19 of AIS-007 (Revision 5)
List of Test Report / Certificates of other models

for Agricultural Tractors / Construction Equipment Vehicles








Rule No.

Subject

Model

No. of test report/ certificate *

Issued by

Justification for applicability for the model under consideration



































































































































































































































































































* Xerox copies of the certificates to be submitted in case if it is from another testing agency or whenever necessary.



Table 20 of AIS-007 (Revision 5)

TECHNICAL SPECIFICATION OF CNG RELATED PARTS

TO BE SUBMITTED BY VEHICLE MANUFACTURER


(To be used for approval of OE CNG vehicles in lieu of Annex I of AIS-024)


1.0

Name of Vehicle Manufacturer




2.0

CNG Cylinder (DOE approved/endorsed)




2.1

Name of manufacturer




2.2

Identification No.




2.3

Working pressure (kg/cm2 )




2.4

Max. test pressure (kg/cm2 )




2.5

Cylinder capacity (water equivalent)




2.6

Approval reference from DOE




3.0

Cylinder Valve(s) (DOE approved/endorsed)




3.1

Name of manufacturer




3.2

Model name/Identification No.




3.3

Type




3.4

Working pressure (kg/cm2 )




3.5

Max. test pressure (kg/cm2 )




3.6

Approval reference from DOE




4.0

CNG Solenoid Valve




4.1

Name of manufacturer




4.2

Model Name/Identification No




4.3

Type




4.4

Working pressure (kg/cm2 )




4.5

Max test pressure (kg/cm2 )




5.0

Petrol Solenoid Valve




5.1

Name of manufacturer




5.2

Model Name/Identification No.




5.3

Type




5.4

Working pressure (kg/cm2 )




5.5

Max test pressure (kg/cm2 )




6.0

Refilling valve




6.1

Name of manufacturer




6.2

Model Name/Identification No.




6.3

Type





Table 20 of AIS-007 (Revision 5)


6.4

Working pressure (kg/cm2 )




6.5

Max test pressure (kg/cm2 )




7.0

Pressure Regulator




7.1

Name of manufacturer




7.2

Model name/Identification No.




7.3

Type




7.4

Inlet pressure (kg/cm2 )




7.5

Outlet pressure (kg/cm2 )




7.6

No. of stages




8.0

CNG Filter




8.1

Name of manufacturer




8.2

Model name/Identification No.




8.3

Type




8.4

Inlet pressure (kg/cm2 )




8.5

Outlet pressure (kg/cm2 )




9.0

High Pressure Tubing




9.1

Name of manufacturer




9.2

Model name/Identification No.




9.3

Type




9.4

Working pressure (kg/cm2 )




9.5

Max. test pressure (kg/cm2 )




9.6

Outer diameter/Inner Diameter




9.7

Protection quality (material used)




10.0

Low Pressure Tubing




10.1

Name of manufacturer




10.2

Model name/Identification No.




10.3

Type




10.4

Working pressure (kg/cm2 )




10.5

Max test pressure (kg/cm2 )




10.6

Outer diameter/Inner Diameter




10.7

Protection quality (material used)




11.0

Gas-Air Mixer




11.1

Name of manufacturer




11.2

Model name/Identification No




11.3

Type & drawing




11.4

Venturi Size




12.0

Selector Switch




12.1

Name of manufacturer




12.2

Model name/Identification No




12.3

Type





Table 20 of AIS-007 (Revision 5)

13.0

Wiring Harness (for CNG system) (Ref. Clause A11 of Table 2 of AIS-007)




13.1

Name of manufacturer




14.0

Interfacing Unit (for closed loop engines)




14.1

Name of manufacturer




14.2

Model name/Identification No.




14.3

Type




15.0

Ignition Timing Advancer




15.1

Name of manufacturer




15.2

Type




15.3

Timing on CNG mode




15.4

Timing on baseline fuel.




16.0

Brief Description of System Including Dimensional Layout for Cylinder and other CNG components installation, ventilation details etc.




17.0

Refilling valve interlocking switch




17.1

Name of manufacturer




17.2

Identification No.




17.3

Type




18.0

Current limiting Device (Fuse)




18.1

Name of manufacturer




18.2

Identification No.




18.3

Voltage/current rating




18.4

Type




19.0
Pressure Indicator



19.1

Name of manufacturer




19.2

Identification No.




19.3

Type




20.0
Service shut off valve



20.1

Name of manufacturer




20.2

Identification No.




20.3

Type




21.0

Compartment/Sub-compartment/Gas tight housing




21.1

Name of manufacturer




21.2

Identification No.




21.3

Type




22.0

Conduit




22.1

Name of manufacturer




22.2

Identification No.




22.3

Inner & outer diameter




22.4

Type




Table 20 of AIS-007 (Revision 5)


23.0

Details of Seat/Upholstery/roof and side lining




23.1

Name of manufacturer




23.2

Model name/Identification No.




23.3

Type




24.0

Details of non-moisture retaining hard rubber/equivalent material padding/lining provided for inner side of the cylinder mounting band(s)




24.1

Name of manufacturer




24.2

Identification No.




24.3

Type




25.0

Any other information






Table 21 of AIS-007 (Revision 5)


Download 5.58 Mb.

Share with your friends:
1   ...   11   12   13   14   15   16   17   18   19



The database is protected by copyright ©ininet.org 2024
send message
    Main page
space provided
technical details
technical specifications
applicable standard
original signatures