REMREM End of I90.bat File

Startup Command File
48
Legacy Startup Command File
Versions 1.8 and earlier of the Interface used a startup command file that contains comma separated parameters that are order dependent. In particular,
rem Command file to start i interface
rem
rem parameters to executable i areas follows:
rem
rem debuglevel Set to 0 to suppress all interface messages
rem
to stdout. Set to either 1, 2, or 3 to see
rem messages. The higher the number, the more
rem information is output. In any case, severe
rem messages are always written to the PI log
rem file (wherever it is defined to be).
rem
rem host The pi server
rem
rem CIU# The user-defined number indicating the CIU,
rem also stored in location 1 of points in PI
rem point database referring to the CIU that the
rem interface is servicing.
rem
rem Port Comport, or 4
rem
rem Baudrate Either 1200, 2400, 4800, 9600, 19200
rem
rem CIUType The version of the CIU, from 1 to 4,
rem corresponding to CIU01, CIU02, CIU03, CIU04.
rem Default is CIUSTARTVERSION (defined in
rem ciuindex.h), currently 3.
rem
rem Delay Number of seconds to delay between exception
rem calls, from .1 to 30 seconds. Converted to
rem milliseconds in code. Default is 2 seconds.
rem Cnt Maximum number of exception calls before
rem delay, from 1 to 100. Default is 20.

Download 0.78 Mb.

Share with your friends: