rem rem Tsync Time synchronization facility, either 0 or 1 rem Default is 0 (no synchronization). rem rem PS Point source in PI database for all points rem covered by the particular CIU#. rem Default is N. rem rem EC Event Counter number (number you specify in rem the iorates.dat file)
Bailey Infi90 Interface to the PI System 49 rem rem The following parameters are supported in interface rem version 1.6 and above rem rem Outputflag Flag indicating whether to enable output: rem 0 to disable output 1 to enable. rem Default is 1 (enable). rem rem ExcepScreen CIU Exception Report screening 1 to enable, rem 0 to disable. Default is 0 (disable). rem rem Failover Failover Mode 0 for no failover, 1 for rem primary interface, 2 for secondary interface. rem Default is 0 (no failover). rem rem PriCIU Primary CIU node/PCU number. Required for rem secondary interface. rem rem Wdogidx CIU index for watchdog output signal in rem primary CIU. If the wdogidx is not supplied, rem index 1 is used. rem rem The following line starts i with debug level 3, rem PIServer named cloudberry, CIU Index 1, comport 1, rem baudrate 19200, CIUType 4, pointsource I, event rem counter number 2, secondary node, Primary CIU index rem 20, watchdox index 1. rem All other parameter values are the default. This is rem indicated by a non-argument in the appropriate position of rem of the parameter list. Use no spaces between rem parameters (except of course between name of
