Use SCP command on R3 to pull the configuration file from R1

Use SCP command on R3 to pull the configuration file from R1.

1. 
   Use SCP to copy the configuration file that you created in Step2a to R3.
   

Address or name of remote host []? 10.1.1.1

Source username [R3]? admin

Source filename []? R1-Config

Destination filename [R1-Config]? [Enter]

Password: cisco12345

!

2007 bytes copied in 9.056 secs (222 bytes/sec)

2. 
   Verify that the file has been copied to R3’s flash.
   

-#- --length-- -----date/time------ path

1 75551300 Feb 16 2015 15:21:38 +00:00 c1900-universalk9-mz.SPA.154-3.M2.bin

2 1338 Feb 16 2015 23:46:10 +00:00 pre_autosec.cfg

3 2007 Feb 17 2015 23:42:00 +00:00 R1-Config

181043200 bytes available (75567104 bytes used)

3. 
   Issue the more command to view the contents of the R1-Config file.
   

!

version 15.4

service timestamps log datetime msec

no service password-encryption

!

hostname R1