Curriculum Vitae of Peter Hodgson contact



Download 453.23 Kb.
Page5/7
Date31.07.2017
Size453.23 Kb.
#25807
1   2   3   4   5   6   7

P.D. Hodgson and B.A. Parker, “The Composition of Insoluble Intermetallic Phases in Aluminium Alloy 6010”, Journal of Materials Science, Vol. 16, No. 5, May (1981) pp 1343-1348

  • P.D. Hodgson and R. Jackson, “Recent Trends in the Alloy Development of Stainless Steel”, Metals Forum, Vol. 4, No. 4 (1981) pp 192-208

    CONFERENCE PAPERS

    1. R. Sudharsan, B.L. Fox and P.D. Hodgson (2010), “High strain rate tensile properties of rapidly cured woven carbon fibre composites”, International SAMPE Symposium and Exhibition

    2. Nikhare, C., Weiss, M. and Hodgson, P. D. (2009) Crash investigation of side intrusion beam during high and low pressure tube hydroforming, TUBEHYDRO 2009 : Proceedings of the 2009 International Conference of Tube Hydroforming conference, pp. 107-112

    3. Nikhare, C., Weiss, M. and Hodgson, P. D. (2009) An investigation of complex shapes during low pressure tube hydroforming, in Levy, B. S.; Matlock, D. K. and Van Tyne, C. J. (eds), IDDRG 2009 : Material property data for more effective numerical analysis : Proceedings of the 2009 International Deep-Drawing Research Group annual conference, pp. 879-888

    4. She, Fenghua, Chen, Ronghua, Gao, Weimin, Hodgson, Peter, Kong, Lingxue and Hong, H. Y.* (2009) Improved 3D thinning algorithms for skeleton extraction, DICTA 2009 : Digital Image Computing : Techniques and Application, pp. 14-18

    5. Sudharsan, Ranjani, Mullins, J., Rolfe, B. and Hodgson, P. (2009) Development of material models to predict the crashworthiness of tubes, in AutoCRC Project Review Committee (ed.), AutoCRC Conference 2009 : Smarter, Safer, Cleaner, pp. 1-12

    6. Gao, Weimin, Kong, Lingxue, She, Fenghua and Hodgson, Peter (2009) Particle dynamics and heat transfer at workpiece surface in heat treatment fluidised beds, AMPT 2009 : Forging a better future, pp. 1-11

    7. Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2009) Integral approach and numerical improvement to calculate the carbon concentration profiles in carburising process, AMPT 2009 : Forging a better future, pp. 1 (ID332)-14

    8. Gao, Weimin, She, Fenghua, Kong, Lingxue and Hodgson, Peter (2009) The influence of geometry and wall character of pores on the permeation of ions and water through desalination membranes, 5th IWA Specialised Membrane Technology Conferences for Water and Wastewater Treatment, p. ID139

    9. Li, Weiqi, Hodgson, Peter, Zhou, Jin* and Gao, Weimin (2009) Thermodynamic and kinetic modelling hydrogenation of titanium particles and sheets, AMPT 2009 : Forging a better future, pp. 1 (ID310)-11

    10. Nikhare, C., Asgari, A., Weiss, M. and Hodgson, P. D. (2009) Multi-scale modelling of DP590 steel, SMF 2009 : Proceedings of the 2009 National Conference on Sheet Metal Forming, pp. 249-256

    11. She, Fenghua, Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2009) Dynamic characteristics and efficiency of a fluidized bed heat treatment process, AMPT 2009 : Forging a better future, pp. 1 (ID185)-9

    12. She, Fenghua Mary, Hong, Hanyu*, Chen, Ronghua*, Gao, Weimin, Hodgson, Peter D. and Kong, Lingxue (2009) Geometrical and topological analysis of membrane's 3D pore structure, Proceedings of the 5th Aseanian Membrane Society Conference; 2009, Aseanian Membrane Societ, Kobe, Japan

    13. W. Q. Li, W. M. Gao, J. Zhou and P. D. Hodgson (2008), “Computational Simulation of Hydrogen Diffusion and Phase Transformation in Titanium Particles”, AMPT Conference & Exhibition, Kingdom of Bahrain, 2 - 5 November.

    14. S. Malekjani, I. Sabirov and P.D. Hodgson (2008), “Deformation Behaviour of Ultrafine Grained Steel Produced by Cold Rolling of Martensite), 47th Conference of Metallurgist, Winnipeg, Canada, 24-28 August

    15. C. Nikhare, M. Weiss and P.D. Hodgson (2008), “Numerical Investigation of High and Low Pressure Tube Hydroforming”, Proceedings,7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Numisheet), Interlaken, Switzerland, 1-5 September, pp 691-696

    16. N. Yazdipour and P.D. Hodgson (2008), “Numerical simulation of the static recrystalization at micro shear bands”, Materials Science & Technology 2008 Conference and Exhibition (MS&t08), Pittsburgh, Pennsylvania, 5-9 October, pp 832-843

    17. H. Beladi and P.D. Hodgson (2008), “Formation of Ultrafine Ferrite by Dynamic Strain-Induced Transformation”, Materials Science & Technology 2008 Conference and Exhibition (MS&t08), Pittsburgh, Pennsylvania, 5-9 October

    18. H. Beladi, Y. Adachi, I. Timokhina and P.D. Hodgson (2008), “Crystallographic analysis of nano-structured bainitic steels”, Thermomechanical Processing of Steels, Padua, Italy, 10-12 September, pp 1-6

    19. I.B. Timokhina, E.V. Pereloma, H. Beladi and P.D. Hodgson (2008), “A study of the strengthening mechanism in the thermomechanically processed TRIP/TWIP steel”, 3rd International Conference Thermomechanical Processing of Steels, Padua, Italy, 10-12 September, pp 1-10

    20. F.H. She, K. Nikara, W.M. Gao, P.D. Hodgson, H. Jinnai and L.X. Kong (2008), “3-Dimensional characterization of membrane with nanoporous structure using TEM topography and image analysis”, (MDIW2008), conference on Membranes in drinking water production and wastewater treatment, Toulouse, France, 20-22 October, pp 1-8

    21. C.P. Nikhare and P.D. Hodgson (2008), “Numerical investigation of ramp and constant pressurization system during tube crushing

    22. process”, Proceedings of International Conference on Advances in Manufacturing Technology (ICAMT), Chennai, India, 6-8 February, pp 1-8

    23. C.P. Nikhare, M. Weiss and P.D. Hodgson, (2008), “Experimental and numerical investigation of low pressure tube hydroforming on 409 stainless steel”, Steel Research International, 79, Vol 1, Special Edition Metal Forming Conference, Dusseldorf, Germany, pp 272-279

    24. B.R. Rolfe, S. A. Asgari and P.D. Hodgson (2008), “The forming of advanced high strength steels for the automotive industry”, Proceedings of 12th International Confernece on Metal Forming, 21-24 September, pp 9-18 Steel Research International, 79, Vol 1, Special Edition Metal Forming Conference

    25. I Sabirov, I. Timokhina, M. Barnett and P.D. Hodgson (2008), “The microstructure evolution and mechanical properties of cryorolled AL alloys”, The 12th International Conference, Metal Forming, Akademia Gorniczo-Hutnicza Conference Proceedings Vol 2, Krakow, Poland, 21-24 September, pp 190-194

    26. C. Nikhare, P.V. Marcondes, M. Weiss and P.D. Hodgson (2008), “Experimental and Numerical Evaluation of Forming and Fracture Behaviour of High Strength Steel”, New Developments on Metallurgy and Applications of High Strength Steels Conference, Buenos Aires, 26-28 May

    27. P.D. Hodgson and H. Beladi (2008), “The Recrystallization Behaviour of Nb Microalloyed Steels”, New Developments on Metallurgy and Applications of High Strength Steels Conference, Buenos Aires, 26-28 May

    28. I.B. Timokhina, P.D. Hodgson, S.P. Ringer, R.K. Zheng, and E.V. Pereloma (2008), “Understanding Bake-Hardening in modern high strength steels for the automotive industry using advanced analytical techniques:”, New Developments on Metallurgy and Applications of High Strength Steels Conference, Buenos Aires, 26-28 May

    29. Y. Yamada, Y.C. Li, J.Y.Xiong, T. Banno, P.D. Hodgson and C.E. Wen (2008), “Processing and Mechanical Properties of Porous TI-Mo Alloy for Biomedical Applications”, Euro PM 2008, Proceedings of the International Powder Metallurgy Congress & Exhibition, Mannheim, Germany, pp 201-205

    30. J. Xiong, Y. Li, P.D. Hodgson and C. Wen (2008), “Mechanical properties of porous TI-26NB alloy for regenerative medicine”, Advances in Heterogeneous Material Mechanics: Proceedings of the Second International Conference (ICHMM-2008), , China, 3-8 June, pp 630-634

    31. X. Chen, Y. Li, Jianguo Lin, P.D. Hodgson and C.E. Wen (2008), “Biomimetic Processing of Nanocrystallite Bioactive Apatite Coating on Titanium-zirconium Alloy”, Advances in Heterogeneous Material Mechanics: Proceedings of the Second International Conference (ICHMM-2008) Conference Proceedings, pp 620-623, China

    32. l. Madej, P.D. Hodgson, M. and Pietrzyk (2008) Multi Scale Modeling Of Phenomena Caused By Changes Of The Deformation Path In Materials Forming, Numiform 2007, Porto, Portugal, pp 221-226

    33. Nouri, X.B. Chen, P.D. Hodgson, J.M. Long, Y. Yamada and C.E. Wen (2008), “Preparation of Bioactive Porous T1-Sn-Nb Alloy for Biomedical Applications, in Lefebvre”, International Conference on Porous Metals and Metallic Foams (MetFoam 2007), pp 307-310

    34. A Nouri, Y. Li, Y. Yamada, P.D. Hodgson and C.E. Wen (2008), “Effects of process control agent on the microstructure and mechanical properties of TI-SN-NB alloy prepared by mechanical alloying”, Proceedings of the 2008 World Congress on Powder Metallurgy & Particulate Materials, Washington, USA, pp 222-233

    35. K. Muszka, j. Majta and P.D. Hodgson (2007), “Study of the Grain Size Effect on the Deformation Behavior of Microalloyed Steels”, Materials Science and Technology (MS&T), Detroit, Michigan, USA, 16-20 September, pp 493-504

    36. J. Mullins, P.D. Hodgson and T. Hilditch (2007), “Stress response of advanced high strength steels using tapered tensile specimens and digital image correlation method”, Materials Science and Technology (MS&T), Detroit, Michigan, USA, 16-20 September, pp 85-98

    37. L. Madej, J. Gawad, P.D. Hodgson and M. Pietrzyk, (2007), “Contribution to digital representation of materials subjected to thermo-mechanical processing”, materials Science and Technology (MS&T), Detroit, Michigan, USA, 16-20 September, pp 403-414

    38. P.K. Collins, J.G. Mullings, B.F. Rolfe and P.D. Hodgson (2007), “Modelling factors of square tubes in high speed bending situations”, SAE 2007 World Congress, Detroit, USA, 16-19 April, pp 1-6

    39. L.X. Kong, F.H. She, W.M. GAO, S. Nahavandi and P.D. Hodgson (2007), “Integrated optimization system for high pressure die casting processes”, Proceedings of the 10th Advances in Materials and Processing Technologies, Deajeon, Korea, 7-11 October, pp 629-634

    40. S. Beladi, P.N. Pathirana, and P.D. Hodgson (2007), “Planar receiver placement for unique emitter localization for indoor applications”, 3rd IEEE International Conference on Wireless and Mobile Computing, Networking and Communications” (WiMob 2007), White Plains, New York, USA, 8-10 October, pp 1-6

    41. Yang, P.D. Hodgson, Q. Liu and L Ye (2007), “Geometrical effects on residual stresses in 7050-T7451 Aluminum alloy rods subject to laser shock peening”, Proceedings of the 10thAdvances in Materials and Processing Technologies, 7-11 October, Daejeon, Korea, 7-11 October , pp 709-718

    42. J. Xiong, Y. Li, P.D. Hodgson and C. Wen, (2007), “Preparation and Characterization of TiNi Shape Memory Alloy Foams by Powder Metallurgy”. Proceedings of the 11th World Conference on Titanium (JIMIC-5), Kyoto, Japan, 3-7 June, Vol 11, pp 1545-1548

    43. X. Chen, Y. Li, J. Lin, P.D. Hodgson, B. Usher and C. Wen (2007), “Assessment of Bioactiity of Zirconium and Titanium-zirconium Alloy”, 11th World Conference on Titanium (JIMIC-5), Kyoto, Japan, 3-7 June, Vol 11, pp 1739-1742

    44. Y. Li, J. Xiong, P.D. Hodgson and C. Wen (2007), “Shape Memory Alloy Scaffolds for Bone Tissue Engineering”, TMS2007, 25 February-1 March Orlando, Florida, U.SA,

      1. pp 125

    45. Y. Li, J. Xiong, M. Forrest, P.D. Hodgson and C. Wen (2007), ”Mechanical property and energy absorption of aluminium foams under dynamic and quasi static compression”, TMS2007, 25 February-1 March Orlando, Florida, U.SA, p 184

    46. Fabijanic and P.D. Hodgson, (2007), “A new duplex surface modification process using fluid bed CVD”, 16th International Federation for Heat Treatment and Surface Engineering (IFHTSE) Congress, 39 October-1 November, Brisbane, Australia, p 115

    47. I.B. Timokhina, P.D. Hodgson, S.P. Ringer, R.K. Zheng and E.V. Pereloma, (2007) “Nano-scale Microstructural Characterisation of Modern High Strength Steels for the Auto-motive Industry” Proceedings International Conference on Microalloyed Steels: Processing, Microstructure, Properties and Performance, July 16-19, Pittsburgh, USA, Association for Iron and Steel Technology, Ronald E. Ashburn, ed. L. C. Oldham, 2007, pp. 305-312

    48. N. Bauer, P. Pathirana and P.D. Hodgson (2006), “Robust Optical Flow with Combined Lucas-Kanade/Horn-Schunck and Automatic Neighborhood Selection”, International Conference on Information and Automation, Colombo Sri-Lanka, 14-17 December, pp 378-383

    49. P.N. Pathirana, A. Lim, A.V. Savkin and P.D. Hodgson, (2006), “Robust Video/Ultrasonic fusion based estimations for Automotive Applications”, 4th International Conference on Industrial Informatics, INDIN 06, 16-18 August, Grand Copthorne Waterfront Hotel, Singapore, pp 207-212

    50. Asgari, V. Lemiale, P. Sunter, S. Quenette, P.D. Hodgson, B.F. Rolfe, (2006), “Application of radial return mapping algorithm for finite strain elastoplasticity in a Hybrid Finite Element and Particle-in-Cell Model”, Proceedings of the 7th World Congress on Computational Bridging of Length Scales in Complex Materials, Los Angeles, California, 20-21 July

    51. M. Weiss, B.F. Rolfe, and P.D. Hodgson, (2006,) “The influence of temperature on the springback behaviour of metal/polymer-laminates”, Proceedings of the International Deep Drawing Research Group, 19–21 June, Porto, Portugal

    52. J. Poh, P.D. Hodgson, M. Dingle, B. Rolfe, W.Q. Song, (2006), “Dynamic Behaviour of Pre-Strained and Baked Steels using Split Hopkinson Pressure Bar (SHPB)”, SAE Congress, 3-6 June, Cobo Center, Detroit, MI, USA

    53. W.M. Gao, L.X. Kong, D.MJ. Fabijanic and P.D. Hodgson (2006), “Computational Simulation of the Influence of Moving Solid Particles on Species Diffusion and Chemical Reactions”, The Fifth International Conference on Engineering Computational Technology, 12-15 September 2006, Las Palmas de Gran Canaria, Spain, pp 1-14

    54. T. de Souza, B. Rolfe, J.L. Duncan and P.D. Hodgson (2006), “Quantitative Analysis of Robustness in a Simulated Stamping Process”, IDDRG, International Deep Drawing Research Group 2006 Conference, 19-21 June 2006, Porto, Portugal, pp 1-8

    55. P.D. Hodgson, A. Shokouhi and H. Beladi (2006), “ Ultrafine Grained Steels through Strain Induced Transformation”, 3rd International Conference on Advanced Structural Steels, Gyeongju, Korea 22-24 August 2006

    56. S. Ighaniyan, W. Hall, J. Long and P.D Hodgson (2006), “The Implementation of the Taguchi method to improve foundry scraps in hot box core production process”, Proceedings of the Eighth International Symposium on Science and Processing of Cast Iron, Beijing, China, China, 16-19th October 2006, pp 446-451

    57. S. Ighaniyan and P.D Hodgson (2006), “A study on veining, burn on of sand and distortion of water jacket cores”, Eighth International Symposium on Science and Processing of Cast Iron, Beijing, China, 16-19th October 2006, pp 288-293

    58. Fei, P.D Hodgson and M. Dingle (2006), “Mechanical Behavior of TRIP Steel Under Cyclic Loading and Unloading Process”, Asian Steel'06, 9-11 May 2006, Fukuoka, Japan

    59. R.I. Scott, P.D. Hodgson (2006), “The Tensile Behaviour of Structural Steel with an Ultrafine Microstructure”, Proceedings of Asia Steel International Conference 2006 (Asia Steel ’06), pp 120-127

    60. L. Madej P.D Hodgson and M. Pietrzyk (2005), “Remeshing problem in the multi scale strain localization CAFE approach”, Lecture Series on Computer and Computational Sciences, 4, 2005, pp 365-368. Conference Proceedings ICCMSE05, Greece

    61. P. Cizek, B.P. Wynne, P.D. Hodgson and B.C. Muddle (2005), “Effect of Simulated Thermomechanical Processing on the Transformation Characteristics and Microstructure of an API X80 Pipeline Steel”, 1st International Conference, Super-High Strength Steels, Associazione Italiana di Metallurgia, 2-4 November, Rome, Italy

    62. L. Madej, P.D Hodgson, A. Zmudzki and M. Pietrzyk (2005) “A Multi Scale Model to Predict Material Behavior During Deformation Processes”, Proceedings of the Eighth International Conference on Computational Plasticity, pp 1203-1205. ComPlas VIII 2005, Barcelona, Spain

    63. L. Madej, P.D. Hodgson and M. Pietrzyk (2005) “Criteria for development of the strain localization during deformation in the multi scale analysis model”, CMS’05: Computer Methods and Systems, pp 91-100. Krakow, Poland

    64. S.A. Asgari, M. Pereira, B. Rolfe, M. Dingle and P.D. Hodgson, (2005), “Design of experiments and springback predictions of AHSS automotive components with complex geometry” NUMISHEET2005, Proceedings of 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Vol. Part 778 A, pp 215-220, American Institute of Physics, Detroit, MI, USA

    65. M. Pereira, A. Asgari, T. de Souza, B. Rolfe, M. Dingle and P.D. Hodgson, (2005). “Sheet Forming Simulation and Springback Prediction for AHSS Automotive Components”, MS&T2005: Materials Science and Technology 2005 Conference Proceedings. The Association for Iron & Steel Technology (AIST) and TMS (The Minerals, Metals and Materials Society), September 2005, Pittsburgh, PA, USA)

    66. W.M. Gao, L.X. Kong and P.D. Hodgson (2005) “Computation simulation of heat transfer and optimization of sphere regenerators”, 5th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, ISMF’05, 3-6 July, Xi’an, China

    67. N.K.B.M.P. Nanayakkara, G.L. Kelly and P.D. Hodgson, “A Qualitative and quantitative investigation of the surface tribology in forming galvanneal steel”, Proceedings of the 4th Australasian Congress on Applied Mechanics, pp. 357-362, Institute of Materials Engineering, Australasia Ltd., Australia

    68. Shokouhi and P.D. Hodgson (2005) “The Role of Dynamic Recrystallisation in Grain Refinement through Strain Induced Transformation”, Iron and Steel Supplement, Vol. 40, pp 247-252

    69. P.D. Hodgson, A. Shokouhi, A. Deghhan Manshadi and H. Beladi (2005) “Grain Refinement through Controlled Thermomechanical Processing”, Iron and Steel supplement, Vol. 40, pp 31-38

    70. L. Madej, P.D.Hodgson, and M. Pietrzyk, (2004), “Application of identification techniques to determine effect of carbon content in steels on rheological parameters during hot deformation”, NUMIFORM 2004, Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes : Material s processing and Design : Modelling, Simulation and Applications, American Institute of Physics, USA pp 554-559

    71. W. Gao, L. Kong, and P.D. Hodgson, (2004) “Numerical simulation of carbon transfer within a workpiece in a fluidised bed heat treatment furnace”, PCMM'2004: Proceedings Eighth International Conference on Manufacturing & Management, Vol.1, pp 585-592, Box Hill, Australia

    72. G.L. Kelly and P.D. Hodgson (2004), “Surface Modification and Lubrication for Metal Forming Applications”, International Conference on Advances in Surface Treatment: Research & Applications (ASTRA), pp 739-744

    73. M. Weiss, B. F. Rolfe, M E Dingle and P D Hodgson, “The influence of interlayer thickness and properties on spring-back of SPS-(steel/polymer/steel) laminates”, Proceedings of 10th Int. Conf on Metal Forming 2004, Akademia Gorniczo-Hutnicza Krakow, Poland, 19-22 September, (2004), pp 445-449

    74. W. Gao, L. Kong, and P.D. Hodgson, (2004) “Numerical study of gas flow and heat transfer in ceramic-sphere regenerators to perform high temperature air combustion”, PCMM'2004:Proceedings Eighth International Conference on Manufacturing & Management, pp 577-584, Australia

    75. W. Gao, L. Kong, and P.D.Hodgson, (2004) “Computational simulation of heat transfer from alternate heating sources”, Proceedings of the The 4th International Conference on Engineering Computational Technology, 7-9 September 2004, Lisbon, Portugal, Paper 72, pp 1-9

    76. W. Gao, L. Kong, P.D. Hodgson, and B Wang, (2004) “Numerical Study of Conduction and Convection Between Immersed Object and Gas Fluidized Bed”, Proceedings of ESDA04, 7th Biennial ASME Conference on Engineering Systems Design and Analysis, 19-22 July, Manchester, UK, pp 1-7

    77. J. Long, W. Gao, and P.D.Hodgson, (2004) “Depth-profiling of carbon in carburised steel by glow-discharge optical emission spectrometry”, Surface Analysis'04: 26th Annual Symposium on Applied Surface Analysis and 15th Annual Symposium of the Pacific Northwest Chapter AVS Science and Technology Society, p 84

    78. L. Madej, P.D.Hodgson, J. Gawad and M. Pietrzyk (2004) “Modelling of the rheological behavior and microstructure evolution using the cellular automaton technique”, Esaform 2004: The 7th Esaform Conference on Material Forming, Norwegian Institute of Science and Technology, Norway, pp 143-146

    79. M.K.B.N.P.Nanayakkara, G. Kelly, and P.D.Hodgson, (2004) “Effect of contact pressure and lubrication on the coating characteristics, surface tribology and friction in forming zinc coated sheet steel”, Proceedings 2nd International Conference on Structure, Processing and Properties of Materials, (SPPM2004), Bangladesh University of Engineering and Technology, Bangladesh, pp 313-320

    80. A.P. Walsh, B. Baliga and P.D. Hodgson (2004), “Force modelling of the crankshaft pin grinding process”, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 218, No.3, pp 219-227

        1. Wallace, A. Brownrigg, P.D.Hodgson and L. Frawley, (2004) “The effect of boron on low carbon rods and galvanised wires”, Proceedings Materials Science and Technology 200, , October 2005, New Orleans, USA, pp 275-286

    81. Asgari, M. Pereira, B. Clark, M. Dingle and P.D. Hodgson, “Sheet forming simulation for AHSS components in the automotive industry”, The 8th International Conference on Numerical Methods in Industrial Forming Processes”, (NUMIFORM 2004), Columbus, Ohio, USA, 13-17 June, 2004, pp 977-982

    82. Y. Lee, S.I. Kim. H.D. Park, C.Y. Huh (Posco), P.D. Hodgson, “AGS Prediction of AISI 4140 Steel in Rod Rolling Process, 2nd International Conference on Thermomechanical Processing of Steels, 15-17 June, 2004, Liege, Belgium

    83. N.K.B.M.P. Nanayakkara, G.L. Kelly and P.D Hodgson, “Application of bending under tension test to determine the effect of tool radius and the contact pressure on the coefficient of friction in sheet metal forming”, Materials forum, Vol. 29, pp 114-118, 2005`

    84. N.K.B.M.P. Nanayakkara, J.M. Long and P.D. Hodgson, “Interaction between the coating characteristics of galvanneal steel and forming parameters during flat die drawing”, Materials forum, (2005)Vol. 29, pp 340-34

    85. W. M. Gao, P. D. Hodgson and L.X. Kong, “Numerical study of gas circulation in heat-treatment furnaces to perform high temperature air combustion”, Proceedings Eighth International Conference on Manufacturing & Management : Operations Management and Advanced Technology : Integration for Success, (PCMM 2004), Gold Coast, 8-10 December 2004, pp 577-584

    86. J. Mullins, P.D. Hodgson, M. Dingle, V. Pidvysotskyy and J. Gawad, “Using abaqus to predict the flow of behaviour of metals”, Proceedings of the Worley Australasian Finite Element Conference, 23-26 September 2003, Melbourne, Australia, pp 231-238

    87. L.X. Kong, W. M. Gao and P.D. Hodgson, “Computational simulation of gas flow and heat transfer near an immersed object in fluidised beds”, Proceedings of the 4th International Conference on Engineering Computational Technology, 7-9 September 2004, Lisbon, Portugal, Paper 70, pp 1-13

    88. C.E. Wen, Y. Yamada and P.D. Hodgson, “Fabrication of novel TiZr alloy foams for biomedical applications”, Materials Science and Engineering, C26, (2006), pp 1439-1444

    89. J. Mullins, P.D. Hodgson, M. Dingle, V. Pidvysotskyy and J. Gawad, “Using abaqus to predict the flow of behaviour of metals”, Proceedings of the Worley Australasian Finite Element Conference, pp 231-238, 23-26 September 2003, Melbourne, Australia, Proceedings of the Worley Australasian Finite Element Conference

    90. L.X. Kong, W. M. Gao and P.D. Hodgson, “Computational simulation of gas flow and heat transfer near an immersed object in fluidised beds”, Proceedings of the Fourth International Conference on Engineering Computational Technology B. H. V Topping and C.A. Mota Soares (Editors), Civil- Comp-Press, Stirling, Scotland, 2004. Paper 70

    91. C.E. Wen, Y. Yamada and P.D. Hodgson, “Fabrication of novel metal alloy foams for biomedical applications”, Proceedings of the third International Conference on Advanced Materials Processing, pp 274-278, Institute of Material Engineering Australasia Ltd, December 2004

    92. S.H. Zahiri and P.D. Hodgson, “Grain Refinement through Metadynamic Recrystallisation”, Proc. Of 2nd International Symposium on Ultrafine Grained Structures (ISUGS), Geelong, Australia, 11-13 November 2003 (on CD)

    93. I.B. Timokhina, P.D. Hodgson and E.V. Pereloma, “Effect of the thermomechanical processing parameters on the microstructure-property relationships in C-Mn-Si TRIP steel”, International Conference on Thermomechanical Processing: Mechanics, Microstructure and Control, 23-26 June, 2002, Published by The University of Sheffield, England, (2003) pp 115-121

    94. Oudin, M.R. Barnett, P.D. Hodgson, “Formation of Ultrafine Grained Structure in Plain Carbon Steels Through Theermomechanical Processing”, Proceedings Thermec 2003, Leganes, Madrid, Spain, July 7-11, 2003

    95. Y.H. Kim, X. Ma, P.D. Hodgson and M.R. Barnett “Multi Equal Channel Angular Pressing with Rotational Dies”Materials Science Forum Vol. 426, No. 432 (2003), pp.2777-2782

    96. W.M.Gao, L.X.Kong, J.M. Long and P.D.Hodgson, “Carburising and Carbon Transfer Coefficient in a Fluidised Bed Furnace” ICME 2003 Conference Proceedings, 13-15 October, Melbourne, Australia, (2003)

    97. W.M.Goa, L.X.Kong, J.Long and P.D. Hodgson, “Dynamic Analysis of instantaneous heat transfer between immersed and surface and Fluidised beds based on FE Simulation”, (2003)

    98. J. Long, P.D. Hodgson and D. Haynes, “Characterization of Hot-Dipped coatings on Strip Steels”, 44th Mechanical working and Steel Processing Conference & 8th International Rolling Conference, Sept 8-11, 2002, Orlando, Fla, USA

    99. Georgina Kelly and P.D. Hodgson, “Surface performance research at Deakin University”, Int Conf on Advances in Surface Treatment: Research & Applications (ASTRA), Hyderabad, India, November 3- 6, 2003.

    100. I.B. Timokhina, E.V. Pereloma and P.D. Hodgson, n“TEM Characterisation of Thermomechanically Processed C-Mn-Si TRIP Steels with Additions of Nb, Mo and Al”, The Conference of Metallurgists, COM 2003, Transformation and Deformation Mechanisms in Advanced High-strength Steels, CD-ROM, August, 2003, pp 331-344

    101. G.K. Cheesewright, M.J. Cardew-Hall, P.D. Hodgson, B. Rolfe and Y. Frayman, “Press shop machine analysis and trending”, Proceedings 17th International Conference On Production Research (ICPR 17), August 2003, Blacksburg, Virginia, USA, pp 1-9

    102. Rolfe, M. Dingle, Y. Frayman, G.I. Webb and P.D. Hodgson, “Analysis of stamping production data with view towards quality management”, Proceedings 9th International Conference on Manufacturing Excellence (ICME '03), October 2003, Melbourne , pp1-15

    103. W.M. Gao, and L. Kong , “Numerical Simulation and Mechanism of Heat Transfer in Quenching Fluidised Beds”, Proceedings of the 4th International Conference on Quenching and the Control of Distortion, 20-23 May, 2003, Beijing, pp 137-142

    104. H. Beladi, G. Kelly, P.D. Hodgson, “Formation of Ultra Fine Grained Structure in Plain Carbon Steels Through Thermomechanical Processing”Material Transactions, Vol. 45, No. 7 (2004) pp2214-2218

    105. Download 453.23 Kb.

      Share with your friends:
    • 1   2   3   4   5   6   7



    The database is protected by copyright ©ininet.org 2024
    send message
        Main page
    third international conference