Curriculum Vitae of Peter Hodgson contact
Download 453.23 Kb.
|
P.D. Hodgson, D.C. Collinson, C.H.J. Davies, and L. Kong, “The Application of Phenomenological, Empirical and ANN Models to the Prediction of Hot Strength in Steels”, IPMM '97 Australasia-Pacific Forum on Intelligent Processing and Manufacturing of Materials, Vol 2 Modelling, Processing and Manufacturing.(1997), pp 1248-1254 and pp 961-967 Wang, P.F. Thomson and P.D. Hodgson “Three-dimensional Modelling of Pore Closure and Welding in Hot Rolling Processes” Thermec (1997) P. Cizek, B.P. Wynne, C.H.J. Davies, B.C. Muddle, P.D. Hodgson, I. Chandra and T. Saka,, “Effect of Strain on the Transformation Characteristics of Low Carbon Microalloyed Steels:, THERMEC 97, International Conference on Thermomechanical processing of Steels and Other Materials D.C. Collinson, P.D. Hodgson and C.H.J, Davies, “Development of Constitutive Models for the Hot Deformation Behaviour of Low and High Carbon Steels”, IPMM ’97 ed, Chandra, T. LeClair, .S. R. Meech, J. A. Verma, B. Smith and M. Balachandran, B. (1997) pp 1234-1240 J. Jaipal, C.H.J. Davies, B.P. Wynne, D.C. Collinson, A. Brownrigg and P.D. Hodgson, “Effect of Carbon Content on the Hot Flow Stress and Dynamic Recrystallisation Behaviour of Plain Carbon Steels”, THERMEC’97. ed. Chandra, T. and Sakai, T. TMS (1997) pp 539–546 D.C. Collinson, P.D. Hodgson and C.H.J. Davies, “The Effect of Carbon on the Hot Deformation and Recrystallisation of Austenite”, THERMEC’97. ed Chandra, T. and Sakai, T. TMS (1997) pp 483 - 490 M. Staiger, C.H.J. Davies, B. Jessop, P.D. Hodgson and A. Brownrigg, “The Effect of Nitrogen on the Microstructural Evolution of Low Carbon Manganese Steels”, THERMEC’97. ed. Chandra, T. and Sakai, T. TMS (1997) pp 515–522 B.P. Wynne, P. Cizek, C.H.J. Davies, B.C. Muddle and P.D. Hodgson, “The Effects of Processing Parameters on the Mechanical Properties of Low Carbon Microalloyed Steels”, THERMEC’97. ed Chandra, T. and Sakai, T. TMS (1997) pp 837-845 P. Cizek, B.P. Wynne, B.C. Muddle and P.D. Hodgson, “Microstructure Evolution in an Austenitic Stainless Steel Deformed in Hot Torsion within the Dynamic Recovery Regime”, THERMEC’97. ed. Chandra, T. and Sakai, T. TMS (1997) pp 709-716 P. Cizek, B.P. Wynne, P.J. Hurley, B.C. Muddle and P.D. Hodgson, “Microstructural Study of Softening Processes in a Duplex Stainless Steel Deformed in Hot Torsion”, THERMEC’97. ed Chandra, T. and Sakai, T. TMS (1997) pp 387-394 L.D. Frawley, R. Priestner and P.D. Hodgson, “Effect of Sulphur in Thin Slab Cast Direct Rolled Mild Steel”, THERMEC’97. ed. Chandra, T. and Sakai, T. TMS, (1997) pp 2169–2176 X.J. Zhang, P.D. Hodgson and P.F. Thomson, “Incorporating the Effect of Change in Strain Path in Constitutive Models of Hot Deformation”, IPMM ’97 ed, Chandra, T. LeClair, S.R. Meech, J.A. Verma, B. Smith and M. Balachandran, B.(1997) pp 941-947 P.D. Hodgson “The Metadynamic Recrystallisation of Steels”, THERMEC’97, ed Chandra, T. and Sakai, T. TMS (1997) Keynote lecture, pp 121-138 E.V. Pereloma and P.D. Hodgson, “Microstructural Characterisation of Strip Steel after Simulated Thermomechanical Processing and Accelerated Cooling”, THERMEC’97 ed T. Chandra, and T. Sakai, TMS (1997) pp 803 - 810 E.V. Pereloma, B. Crawford and P.D. Hodgson, “The Kinetics of Strain Induced Precipitation in Nb Microalloyed Steels”, 1997 International Symposium on Physical Simulation, ed. Suzuki, A.G. Sakai, T and Matsuda, F. NRIM (1997) Invited Lecture B.C. Muddle, P. Cizek, B.P. Wynne, C.HJ. Davies and P.D. Hodgson, “Microstructure in Controlled-Rolled Low-Carbon Microalloyed Steels”, Materials Solutions ’97, Accelerated Cooling/Direct Quenching Steels. ed. Totten, G, ASM Intl. (1997) pp 125-134 L.X. Kong, R. A. Platfoot, F.H. She and P.D. Hodgson, “Moisture Transfer Through Porous Textiles with Temperature Differences”, ATC 97. 4th Asian Textile Conference. Taipei. June (1997) pp 654-660 E.V. Pereloma, B.R. Crawford and P.D. Hodgson, “Strain Induced Precipitation of NbC During Hot Deformation”, 7th International Symposium on Physical Simulation, (1997) Tsukuba, Japan T. and Sakai, T. TMS (1997) pp 875-882 X. Zhang, P.F. Thomson and P.D. Hodgson, “The Stress-Strain and Recrystallisation Behaviour for Deformation Involving a Change in Strain Path”, THERMEC’97. ed. T. Chandra, and T. Sakai, TMS (1997) pp 1705-1712 Wang, P.F. Thomson and P.D. Hodgson, “A Study of Pore Closure and Welding using Lead as a Model Material”, IPMM ’97 ed. T. Chandra, S. R. LeClair, J.A. Meech, B. Verma, M. Smith and B. Balachandran, (1997) pp 1241-1247 P.D. Hodgson, D.C. Collinson and B. Perrett, “The Use of Hot Torsion to Simulate the Thermomechanical Processing of Steel”, 1997 International Symposium on Physical Simulation, ed. A.G. Suzuki, T. Sakai and F. Matsuda, NRIM (1997) Invited Lecture, pp 219-239 M.R. Barnett, J.J. Jonas and. P.D. Hodgson, “A Comparison Between the Recrystallisation Behaviours of Warm and Cold Rolled Ferrite”, 36th MWSP Conference. Hamilton. TMS. Warrendale, (1996) pp 971 Wang, P.F. Thomson and P.D. Hodgson, “Effect of Gas Pressure on Pore Closure During Hot Rolling”, ed J. H. Beynon, P.Ingham, H.Teichert, and K. Waterson, Modelling of Metal Rolling Processes, The Institute of Materials, (1996) pp 68-75 P.D. Hodgson, R.E. Gloss, L.O. Hazelden and D. Matthews, “Development of Mathematical Models to Predict the Microstructure Evolution during the Hot Rolling of Long Products”, Microalloying 95, Iron and Steel Soc., (1995) Invited lecture, pp 341-353 P.D. Hodgson, L.O. Hazelden, D.L. Matthews and R.E. Gloss, “The Development and Application of Mathematical Models to Design Thermomechanical Processes for Long Products”, Proceedings International Conference "Microalloying 1995" M. Pietrzyk, C.R. Roucoules and P.D. Hodgson, “Dislocation Model for Work Hardening and Recrystallisation App lied to the Finite-Element Simulation of Hot Forming”, NUMIFORM '95 ed S.F. Shen and P.R. Dawson, Balkema, Rotterdam, (1995) pp 315-320 Zarei-Hanzaki, R. Pandi, P.D. Hodgson and S.Yue, “The Evaluation of Transformation Behaviour of Steels by Continuous Cooling Compression Testing”, Phase Transformations during the Thermal/Mechanical Processing of Steel, ed E.B. Hawbolt and S. Yue, CIMMP (1995) pp 233-242 M.R. Barnett, J.J. Jonas and P.D. Hodgson, “Grain Size After Warm Working and Recrystallisation of a Low Carbon Steel”, 35th Mechanical Working and Steel Processing Conf. ISS-AIME. Warrendal Baltimore, TMS (1995) pp 385 – 391 J M. Barnes, B.A. Muddle and P.D. Hodgson, “Microstructure and Properties of Continuously Cooled Low C Bainite Steels Phase Transformations during the Thermal/Mechanical Processing of Steel”, ed E.B. Hawbolt and S. Yue, CIMMP, (1995) pp 161-178 M. Pietrzyk, C.R. Roucoules and P.D. Hodgson, “Modelling the Thermomechanical and Microstructural Evolution During Rolling of a Nb HSLA Steel”, Zastosowanie Komputerow W Zakladach Przetworstwa Metali, Materials, 22 (1995) pp 1-12 C.R. Roucoules, P.D. Hodgson and B.A. Parker, “Modelling of Stress-Strain Behaviour Incorporating Dynamic and Metadynamic Recrystallisation”, RISO '94 Numerical Predictions of Deformation Processes and the Behaviour of Real Materials, ed S. I. Anderson, J. B. Bilde-Sorensen, T. Lorentzen, O. B. Pedersen and N. J. Sorensen, RDO National Lab. Roskilde, Denmark (1994) pp 511-516 Zarei-Hanzaki, P.D. Hodgson and S. Yue, “The Retained Austenite Characteristics in a Thermomechanically Processed Nb Bearing TRIP Steel”, Proceedings of the Int. Symposium on High-Strength Sheet Steels for the Automotive Industry. 36th ISS Mechanical Working & Steel Processing Conference, Baltimore (1994) pp 53-62 P.D. Hodgson, D.C. Collinson and B.A Parker, “The Deformation and Recrystallisation Behaviour of Austenite During Hot Rolling”, Advances in Hot Deformation Textures and Microstructures, TMS.1993. ed J. J. Jonas, T. R. Bieler and K. J. Bowman, (1993) Keynote lecture, pp 41-61 P.D. Hodgson, D. McFarlane and .K. Gibbs, “The Mathematical Modelling of Hot Rolling: Accuracy vs Utility”, 1st Int. Conf. Modelling of Metal Rolling Processes, 21-23 September 1993, Imperial College, London, UK pp. 2-15 R.E. Gloss, R.K. Gibbs and P.D. Hodgson, “The Design and Performance of a Laboratory Spray Cooling Unit to Simulate Inline Heat Treatment of Steel”, Quenching and Carburising, Proc 3rd Int. Seminar, IFHT ed P. D. Hodgson, Institute of Materials (1993) pp 189-204 L.O. Hazelden and P.D. Hodgson, “The Effect of Composition on the Microstructure and Properties of Direct Quench and Self Tempered Steels”, Physical Metallurgy of Direct Quenched Steels. ed K A Taylor, S W Thompson and F B Fletcher, TMS (1993) pp 139-154 Zarei-Hanzaki, P.D. Hodgson and S. Yue, “The Effects of Ferrite Quantity and Morphology on the State of the Retained Austenite in Si and Si, Nb Bearing TRIP Steels”, Physical Metallurgy of Direct Quenched Steels, ed K A Taylor, S W Thompson and F B Fletcher, TMS (1993) pp 139-154 P.D. Hodgson, L.O. Hazelden, B.A. Hugaas, R.E. Gloss, and M. Assefpour, “Laboratory Simulation of Quench and Self Tempered Products”, Physical Metallurgy of Direct Quenched Steels. ed K A Taylor, S W Thompson and F B Fletcher, TMS (1993) pp 139-154 Collinson, P.D. Hodgson and B. Parker, “Modelling the Effect of Carbon Content on the Hot Strength of Steel”, 35th Mechanical and Steel Working and Steel Processing Conference. Pittsburgh P.A. October (1993) pp 283-295 R.K Gibbs, P.D. Hodgson and B.A Parker, “The Prediction of Ferrite Grain Size in Nb Microalloyed Controlled Rolled Steel”, Low C Steels to the '90's ed R. Asfahani and G. Tither, TMS (1993) pp 173-180 I.P. Kemp, P.D. Hodgson and R.E. Gloss, “Process and Microstructure Model of High Speed Rod Rolling”, 35th Mechanical and Steel Working and Steel Processing Conference, Pittsburgh, P.A., October (1993) pp 149-164 Zarei-Hanzaki, P.D. Hodgson and S. Yue, “The State of the Retained Austenite after Thermomechanical Processing of TRIP Steel”, 34th Mechanical Working and Steel Processing Conference, 1992, ISSE-AIME, XXIX, Montreal, (1993) pp 507-513 J.H. Beynon, R. Gloss and P.D. Hodgson The Production of Ultrafine Equiaxed Ferrite in a Low Carbon Microalloyed Steel by Thermomechanical Treatment Materials Forum (1992) 16, pp.37-42 Kemp and P.D. Hodgson, “Computer Modelling of High Speed Rolling”, Modelling and Control of Materials Processing, IMMA, Wollongong. (1992) C.R. Roucoules, P.D. Hodgson, S. Yue and J.J. Jonas, “Dynamic and Post Dynamic Recrystallisation in Mo-Ti Steel”, Int. Conf. Processing, Microstructure and Properties of Microalloyed and other Modern High Strength Steels, Pittsburgh, 1991, ed. A.J. De Ardo, TMS (1992) pp 95-104
B.A. Hugaas, P.D. Hodgson and A. Brownrigg, “Effect of Processing Route and Niobium Content on the Microstructure and Properties of Low Carbon-Boron-Steels”, 1990 Mechanical Working and Steel Processing Conference. ISS-AIME (1991) pp 103-112 P.D. Hodgson, K. Browne, M.R.K, Gibbs, T.T. Pham and D.C. Collinson, “The Mathematical Modelling of Temperature and Microstructure During Spray Cooling”, Proc. Int. Conf. Quenching and Distortion. ed. G. Totten, ASM (1991) pp 41-50 P.D. Hodgson, R.E. Gloss, and G.L. Dunlop, “Microstructure Evolution During Rod and Bar Rolling”, 1990 Mechanical Working and Steel Processing Conference, ISS-AIME (1991) pp 527-538 P.D. Hodgson and R.K. Gibbs, “Modelling of Metal Rolling Processes - Symposium 2: Control of Properties in Hot rolling”, Inst. Metals, London (1991) Paper 4 R.K. Gibbs and P.D. Hodgson, “The Modelling of Microstructure Evolution and Final Properties of Nb Microalloyed Steels”, Morris E. Fine Symposium, ed. P.K. Liaw, J.R. Weertman, H.L. Marcus and J.S. Santner, TMS (1991) pp 73-81 P.D. Hodgson and D.C. Collinson, “The Calculation of Hot Strength in Plate and Strip Rolling of Niobium Microalloyed Steel”, Int. Symp. Mathematical Modelling of Hot Rolling of Steel, ed. S. Yue, C.I.M. (1990) pp 239-251 P.D. Hodgson and R.K. Gibbs, “A Mathematical Model to Predict the Final Properties of Hot Rolled C-Mn and Microalloyed Steels”, International Symp. “Mathematical Modelling of Hot Rolling of Steel”, ed. S. Yue, C.I.M. (1990) pp 76-85 R. Peterson and P.D. Hodgson, “Grain Coarsening Behaviour of Ti and Nb Microalloyed Steels”, Institute of Metals and Materials Australasia, Victorian Branch. Microstructure Control to Achieve Properties in Modern Steels, Monash University, Melbourne, 30 January-1 February 1990, Extended Abstracts (1990) pp 51-54 P.D. Hodgson, “Recrystallisation Processes in Hot Rolling”, Institute of Metals and Materials Australia, Victoria Branch, “Microstructure Control to Achieve Properties in Modern Steels”, Monash University, Melbourne. 30 January-1 February 1990, Extended Abstracts (1990) pp 20-21 S.F. Wong, P.D. Hodgson and P.F. Thomson, “Lead as a Model Material for Simulating the Hot Rolling of Steel”, Int. Symp. Mathematical Modelling of Hot Rolling of Steel, ed. S. Yue, C.I.M. pp 281-289 R.K. Gibbs, P.D. Hodgson, and B.A. Parker, “Effect of Deformation History on Recrystallisation Behaviour of Nb-Microalloyed Steels”, International Conference on Recrystallisation in Metallic Materials, “Recrystallisation '90”, Wollongong, NSW, January 1990, ed. T. Chandra, TMS (1990) pp 585-590 P.D. Hodgson, A. Brownrigg and S.H. Algie, “Static Recrystallisation of Coarse and Fine Grained C-Mn Steels”, International Conference on Recrystallisation in Metallic Materials “Recrystallisation '90”, Wollongong, NSW, January 1990, ed. T. Chandra, TMS (1990) pp 451-546 B.A. Hugaas, P.D. Hodgson and D.C. Collinson, “The Static and Dynamic Recrystallisation of a Hot Worked Ferritic Fe-Si Alloy”, International Conference on Recrystallisation in Metallic Materials, “Recrystallisation '90”, Wollongong, NSW, January 1990, ed. T. Chandra, TMS (1990) pp 573-578 R.K. Gibbs, T. Strachan and P.D. Hodgson, “Factors Affecting the Strength and Ductility of Hot Rolled Niobium Microalloyed Strip”, Australasian Corrosion Association, Australasian Institute of Metal Finishing and Institute of Metals and Materials Australasia, “Step into the 90's”, Transactions of the First Joint Conference on Corrosion, Finishing and Materials, Broadbeach, Queensland, 27-31 August Vol. 2, (1989) pp 471-480 P.D. Hodgson and R.K. Gibbs, “The Simulation of Hot Strip Rolling by Hot Torsion”, Australasian Corrosion Association; Australasia. “Step into the 90's”, Transactions of the First Joint Conference on Corrosion, Finishing and Materials, Broadbeach, Queensland, 27-31 August 1989, Vol. 2 (1989) pp 481-491 P.D. Hodgson, R.D. Hefford, A Brownrigg and S.H. Algie, “The Calculation of Force in the Hot Rolling of Flat and Rectangular Products”, Institute of Metals and Materials Australasia Ltd, The Material Wealth of the Nation, Bicentennial. Sydney, 16-20 May 1988, Vol. 1 (1988) pp 273-278 R,K. Gibbs and P.D. Hodgson, “The Transformation Behaviour of Niobium Microalloyed Steels”. The Material Wealth of the Nation, Proceedings of the Bicentennial Conference 88, Crest Hotel, Sydney, 16-20 May, (1988), Vol 1 P.J. Campbell, P.D. Hodgson, M. Lee and R.K. Gibbs, “Modelling of Microstructural Changes During the Hot Rolling of C-Mn Steels”, Proceedings Vol. 2, Int Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals, THERMEC 88, June 6-10 1988, Tokyo, Japan M.T. Heady, D.A. St. John, and P.D. Hodgson, “Recrystallisation of Ferritic Stainless Steel” Institute of Metals and Materials Australasia Ltd, “The Material Wealth of the Nation”, Bicentennial Conference. Sydney. 16-20 May 1988 (1988) pp 261-266 P.D. Hodgson, P.J. Campbell, A. Brownrigg and S.H. Algie 1987, “The Application of Mathematical Modelling to the Simulation of Complex Metallurgical Processes”, Modelling & Simulation International Conference, Hilton International, Melbourne, 14-16 October (1987) P.D. Hodgson, M.P. Brown, J.C. Arnold and A. Brownrigg, “Microstructural Changes During the Continuous Annealing of Stainless Steel”, Institute of Metals and Materials Australasia, 1987 Australasian Conference on “Materials for Industrial Development”, School of Engineering, University of Canterbury, New Zealand, 24-26 August (1987) pp 279-284 P.D. Hodgson, J.A. Szalla and P.J. Campbell, “Modelling of Thermomechanical and Metallurgical Processes in Plate Rolling”, 4th International Steel Rolling Conference, The Science and Technology of Flat Rolling, Vol. 1. IRSID, Deauville, France, 1-3 June (1987) pp C8.1-C8.13 L.D. McKewen and P.D. Hodgson, “A Force-Torque-Temperature Model for Bloom Rolling”, Institute of Metals and Materials Australasia and Australian Institute of Non Destructive Testing, 1986 Materials Technology Congress Proceedings, Inaugural Congress, held Adelaide, May 1986 Volume 2, Papers 3-B-9, (1986) p 7 P.D. Hodgson, J.A. Szalla and P.J. Campbell, “Force-Torque-Temperature and Metallurgical Modelling of Hot Rolling”, Rolling Technology Conference, Proceedings, Sydney, November (1986) pp 49-57 M.J. Vines, P.D. Hodgson and R.B. Oldland, “Weldability of Structural Steels - Effects of Residual Elements”, Australian Welding Institute. 31st Annual Conference, 'WELCOM 83, Welding and Computers', Sydney, 16-21 October ( 1983) pp 119-124 Current Supervision (all Deakin University, unless specified)
of Download 453.23 Kb. Share with your friends:
|