Curriculum Vitae personal details
Download 319.53 Kb.
|
- Navigate this page:
- Refereed Conference Papers
- Keynote Paper
- 2008 SIWZIE Award – winning paper.
- Best Student Paper Award
Other Journals Backhouse C J, Price R and Moore P R (1994) “Crane Automation” The Industrial Robot, MCB University Press, 0143-991X, Vol. 21, No. 4, pp 22-25. Lewis B, Moore P R, Hayward H, Buchanan M, and Phillips J. (1996), “ Tools, Trade and Teamwork”, Manufacturing Engineer, Volume 75, Number 2, April, pp 89-92. (Article based on the Overseas Science and Technology Expert Mission Scheme (OSTEMS), DTI Report, “Study Tour of the Manufacturing and Research Base of the Basque Country”, pp. 1-49). Oscarsson J and Moore P R (1999) “Production System Design Using Advanced Computer Aided Robotics”, Robotics Today, SME, Dearborn, Michigan, USA. pp. 1-7, Volume 12, Number 2 (Second Quarter 1999). Goodyer E, Moore P R, Wong C B and Chen X (2013). “iCARE – A Platform for Interoperability for Mobile and Home Telecare”. THE ISSUE-NEREUS publication "Space and ICT Applications supporting Smart, Green, Integrated Transport and Urban Mobility" – Paper 38. Section -Safety, security and health for urban communities addressing the User Requirement for Development of common data services. East Midlands Region. Refereed Conference Papers Pu J, Weston R H and Moore P R (1990) "Performance Characteristics of Spool Type Pneumatic Control Valves". 9th Int. Symposium. on Fluid Power, Cambridge, UK, April. Moore P R, Pu J, Harrison R H and Weston R H (1991) "A General Purpose Digital Motion Controller for Fluid Power Systems", Bath International Fluid Power Workshop - Systems, Modelling and Control, University of Bath, September Pu J, Moore P R, Weston R H and Chen C (1991) "Profile-Planning in Digital Motion Control of Servo Pneumatic Drives", American Soc. of Mech. Engineers. - Winter Annual Meeting, Fluid Power Systems & Technology Symposia, Atlanta, USA, December Moore P R, Harrison R and Pu J (1992) "The Progression of Servo Pneumatic Systems Towards Advanced Applications", Bath International Fluid Power Workshop - Circuit, Component and System Design, University of Bath, 16-18 September Pu J, Harrison R, Moore P R and Weston R H (1993) " Design and Usage of 'Intelligent' Servo Pneumatics as an Alternative to Electric Servo Technology", Machine Actuators and Control, Technical Seminar, I.Mech.E., London, 31 March. Proceedings pp 53-59. Pu J, Harrison R, Moore P R and Weston R H (1993) "Application and Design Trends of Intelligent Servo Pneumatics", 12th World Congress - International Federation of Automatic Control, Sydney, Australia, 19-23 July. Proceedings Vol. 6 pp 487-492. Pu J, Moore P R, Harrison R and Weston R H (1993) "A Gain Scheduling Control Strategy for Servo Pneumatic Drives", Bath International Fluid Power Workshop - Simulation, Modelling and Control, University of Bath, 23-24 September. Proceedings pp 1-16. Moore P R, Wong C B and Weston R H (1993) "An Intelligent Framework for Drive System Tuning", IEEE Workshop on Emerging Technologies for Factory Automation, Cairns, Australia. September 27-29. Proceedings pp 65-70. Pu J and Moore P R (1994). “Application Requirements for Digital Control of Servo-Pneumatic Systems”. Invited paper to I.Mech.E Seminar on ‘Digital Control of Fluid Power’, Birmingham, 22 June. Proceedings pp. 8/1-8/7. Moore P R and Eriksson P (1994). “Improved Computer Aided Robotics with Sensor Simulation”. IEEE Conference ‘Mechatronics and Machine Vision in Practice’. University of South Queensland, Australia. September 13-15. Proceedings pp. 230-234, ISBN 0-8186-6300-6. Carrott A J and Moore P R (1994). “A Motion Design Package Supports the use of a Programmable Transmission System”. 10th National Conference on Manufacturing Research. Loughborough University, 13-15 September. Proceedings pp. 1-5. Carrott A J, Moore P R, Weston R H and Harrison R (1994). “UMC: Software for Machine Control System Integration, Configuration and Programming”. UK/Hungarian International Mechatronics Conference. Budapest, 21-23 September. Proceedings ‘Mechatronics - the basis for new industrial development’, Computational Mechanics Publications pp. 679-686. ISBN 1-85312-367-6. Goh A S and Moore P R (1994). “A Mechatronic Solution to a Packaging Application Using an ‘Open’ Control Integration Platform.” UK/Hungarian International Mechatronics Conference. Budapest, 21-23 September. Proceedings ‘Mechatronics - the basis for new industrial development’, Computational Mechanics Publications pp. 91-96. ISBN 1-85312-367-6. Pu J, Wong C B and Moore P R (1994) “A Preliminary Study on Frequency Response Characteristics of Servo-Pneumatic Systems”. American Society of Mechanical Engineers (ASME) - WAM and IFAC Workshop on Trends in Hydraulic and Pneumatic Components and Systems, Chicago, 8-9 November, pp. 1-12. Pu J, Wong C B and Moore P R (1995) “An Investigation into the Profile Following Capability of Servo-Controlled Air Motors”. 4th Scandinavian International Conference on Fluid Power, Tampere, Finland, September 27-29. Yeung W H R and Moore P R (1995) “An Integrated MMS and Colour Petri-Net Model for the Distributed Control of Flexible Assembly Systems”. ICCIM/AUTOFACT - ASIA ‘95, Singapore. July, pp. 1-10. Pu J, Wong C B and Moore P R (1995) “Acceleration Characteristics of Servo-Controlled Pneumatic Cylinders” Fluid Power Systems Technology Symposia, ASME Winter Annual Meeting, California, USA. November 12-17. Pu J, Wong C B and Moore P R (1995) “Methods of Overcoming Frictional Effects in the Control of Servo-Pneumatic Systems”. Fluid Power Systems Technology Symposia, ASME Winter Annual Meeting, California, USA. November 12-17. Yeung W H R and Moore P R (1995) “A Distributed Field Message Controller for Intelligent Conveyor Systems” IEEE International Conference on Systems, Man and Cybernetics, Vancouver, Canada. October 22-25. Eriksson P and Moore P R (1995) “Simulation of Sensors to Enhance the Capability of Computer Aided Robotics”. Proceedings of International Robotics Workshop, Linkoping, Sweden, June. Moore P R and Eriksson (1995) “A Role for ‘Sensor Simulation’ and ‘Pre-emptive Learning’ in Computer Aided Robotics”. Proceedings of 26th International Symposium on Industrial Robots (ISIR’95), Singapore, 4-6 October. Eriksson P and Moore P R (1995) “ An Environment for Off-Line Programming and Simulation of Sensors for Event Driven Robot Programs”. Proceedings of International Conference on Recent Advances in Mechatronics (ICRAM), Istanbul, Turkey, 14-16 August, ISBN 975-518-063-X. Pu J and Moore P R (1995) “Component-based Image/Model Driven Design of Distributed Manufacturing Machine Control Systems”. Proceedings of Int. Conference. on Recent Advances in Mechatronics (ICRAM ’95), Istanbul, Turkey, 14-16 August, ISBN 975-518-063-X. Pu J and Moore P R (1995) “A Comparative Study of Approaches for Building Intelligent Machine Control Systems. 11th National Conference on Manufacturing Research (NCMR ’95), De Montfort University, 12-14th September. Zheng Y and Moore P R (1995) “Searching a Tracked Point on the Target Trajectory of a Mobile Robot”. Full paper - 34th IEEE Conference on Decision and Control, New Orleans, December 13-15. Mahalik N P, Moore P R and Pu J (1995) “Fieldbus Technology: A Solution for Multiplexing Plant Signal”, Innovations in Manufacturing through Mechatronics, UK. IEE Colloquium Digest, Digest number 1995/214, November. Zheng Y, Moore P R and Mahalik N P. (1996) “Orientation Control of AGVs with Time-Optimal Strategy”. 13th IFAC World Congress, San Francisco, USA, 30 June - 5 July. Yeung W R H and Moore P R (1996) “ Synthesis of Flexible Assembly Systems Controller using Colour Petri-Nets”. 12th Int. Conference of CAD/CAM, Robotics and Factory of the Future, Middlesex University, 14-16 August. Yeung W R H and Moore P R (1996) “An Integrated Object Oriented Environment for Rapid Programming and Control of Flexible Conveyor Systems”. Mechatronics ‘96 / MMVIP, Minho, Portugal, 18-20 September. Proceedings. Eriksson P and Moore P R (1996) “A Role for Computer Aided Robotic Environments in Training Adaptive Robots”. Mechatronics ‘96 / MMVIP, Minho, Portugal, 18-20 September. Proceedings. Moore P R, Chen C M and Mahalik N P (1996) “Multiple Independent Drives Synchronisation: An Application of Fuzzy Logic”. Mechatronics ‘96 / MMVIP, Minho, Portugal, 18-20 September. Proceedings. Pu J, Moore P R, Wong C B and Wang J (1996) “The Role of Mechatronics in Advanced Pneumatic Systems”. Mechatronics ‘96 / MMVIP, Minho, Portugal, 18-20 September. Proceedings. Wang J, Pu J, Wong C B and Moore P R (1996) “Robust Servo Motion Control of Air Motor Systems”, UKACC ’96, International Conference on Control ’96, 2-5 September, University of Exeter, UK. Zheng Y, Moore P R and Pu J (1996) “Precise Position Control for Five-port Valve Actuator Time Optimally”. Short paper - 35th IEEE Conference on Decision and Control. Kobe, Japan, 11- 13 December. Pu J, Wang J, Moore P R and Wong C B (1997) “A New Strategy for Closed Loop Control of Servo-Pneumatic Systems with Improved Energy Efficiency and System Bandwidth”. Proceedings of the 5th Scandinavian International Conference on Fluid Power, SICFP ’97, Linkoping, Sweden. May 28-30. Zheng Y and Moore P R (1997) “Motion Control Design for AGVs”, Proceedings of American Control Conference 1997, New Mexico, USA. June 4-6. Yeung W R H and Moore P R (1997) “Advanced Cell Control in the Application of Flexible Assembly Systems”, Proceedings of WMC ’97, World Manufacturing Congress, Massey University, Albany Campus, Auckland, New Zealand, 18-21 November, pp 202-208. Mahalik N P, Moore P R and Pu J (1996) “Fieldbus Technology: A Solution for Designing Intelligent Control Systems for Process and Manufacturing Industries”, Proceedings, International Conference on Network and Applications, Network-96, NCST-Bombay, India, 305th January. Mahalik N P, Moore P R and Pu J (1997) “Model-free based FDI Solution with Fieldbus: A Case Study with Pneumatic Actuator System”, Proceedings, 3rd International IFAC Symposium on Intelligent Components and Instruments for Control Applications, SISICA-97, France. Oscarsson J and Moore P R (1998) “Production System Design Using Advanced Computer Aided Robotics”, Proceedings of CIRP, 31st CIRP Conference on Manufacturing Systems, Berkley, California, USA, 26-28 May. Yeung W H R and Moore P R (1998) “Control of Flexible Assembly Systems with a Fault Recovery Capability”, Mechatronics ’98 International Conference, The 6th UK Mechatronics Forum Conference, Elsevier Proceedings, 9-11 September, Skövde, Sweden. ISBN 0-08-0433391. Pu J and Moore P R (1998) “Towards Paradigm Shift in Machine Design and Control”, Mechatronics ’98 International Conference, The 6th UK Mechatronics Forum Conference, Elsevier Proceedings, 9-11 September, Skövde, Sweden, pp 23-30, ISBN 0-08-0433391. Pu J and Moore P R (1998) “Smart Components-based Servo Pneumatic Actuation Systems”, Mechatronics ’98 International Conference, The 6th UK Mechatronics Forum Conference, Elsevier Proceedings, 9-11 September, Skövde, Sweden. ISBN 0-08-0433391. Moore P R, Pu J, Ujvari S and Lundgren J O (1998) “Intelligent Semi-Autonomous Vehicles in Materials Handling”, Mechatronics ’98 International Conference, The 6th UK Mechatronics Forum Conference, Elsevier Proceedings, 9-11 September, Skövde, Sweden. ISBN 0-08-0433391. Ujvari S, Eriksson P T, Moore P R and Pu J (1998) “Simulation and Emulation of Sensor Systems for Intelligent Vehicles”, Mechatronics ’98 International Conference, The 6th UK Mechatronics Forum Conference, Elsevier Proceedings, 9-11 September, Skövde, Sweden. ISBN 0-08-0433391. Adolfsson J, Olofsgård P, Moore P R and Pu J (1998) “3-D Graphical Simulation of Agile Modular Machine Systems”, Mechatronics ’98 International Conference, The 6th UK Mechatronics Forum Conference, Elsevier Proceedings, 9-11 September, Skövde, Sweden, pp 867-872. ISBN 0-08-0433391. Oscarsson J and Moore P R (1998) “Simulation of Continuous Process Variations in Production System Design”, Mechatronics ’98 International Conference, The 6th UK Mechatronics Forum Conference, Elsevier Proceedings, 9-11 September, Skövde, Sweden, pp 891-896. ISBN 0-08-0433391. Nordqvist A R, Eriksson P T and Moore P R (1998) “User-Modelling to Improve the Usability of Systems for Computer-Aided Process Planning”, Mechatronics ’98 International Conference, The 6th UK Mechatronics Forum Conference, Elsevier Proceedings, 9-11 September, Skövde, Sweden, pp 903-910. ISBN 0-08-0433391. Simon M, Moore P R and Pu J (1998) “The WHITEBOX - capturing and using product life cycle data”, Proceedings 7th CIRP Life Cycle Design ’98 Seminar, Stockholm, Sweden, 16-18th September. Proceedings pp161-170. Wang J, Moore P R and Pu J (1999) “Control Strategy Development for High Speed Servo-Pneumatic Actuator Systems”. Proceedings of International Conference IFAC ’99. Shen L G, Pu J, Moore P R, Wong C B and Chong S K (1999) “An Analysis of the Control System Design Environment (CSDE)”, Proceedings of CIRP Conference on Manufacturing Systems, TU Leuven, Belgium, May. Moore P R (1999), “New Paradigms in Machine Design and Control”, Keynote Paper International Conference - Mechatronics and Machine Vision in Practice 99 (M2VIP ’99), METU, Ankara, Turkey, 1-3rd September. Oscarsson J, Eriksson P T and Moore P R (1999) “Estimating Robotic Assembly Cell Performance with Simulation based on Statistical Sampling of Process Variation”. Proceedings of International Symposium on Industrial Robotics (ISIR ’99), Tokyo, Japan, November. Moore P R, Pu J, Xie C, Simon M and Bee G (2000) “Life Cycle Data Acquisition Methods and Devices”. Mechatronics 2000 International Conference, The 7th UK Mechatronics Forum Conference, Atlanta, USA, 6-8th September. Moore P R, Pu J, Poduraev J, Ermolov I and Shvedov V (2000) “Computer Aided Robotics in Severe Environmental Applications”. Mechatronics 2000 International Conference, The 7th UK Mechatronics Forum Conference, Atlanta, USA, 6-8th September. Adolfsson J, Ng H C, Olofsgard P, Moore P R, Pu J and Wong C B (2000) “Design and Simulation of Components-based Manufacturing Machine Systems”. Mechatronics 2000 International Conference, The 7th UK Mechatronics Forum Conference, Atlanta, USA, 6-8th September. Nordqvist A R, Eriksson P T and Moore P R (2000) “A User Interface Management System for Components-based Manufacturing Machinery”. Mechatronics 2000 International Conference, The 7th UK Mechatronics Forum Conference, Atlanta, USA, 6-8th September. Adolfsson A, Ng H C, Moore P R and Pu J (2000) “Modular Machine System Design using Graphical Simulation”. Proceedings of CIRP, 33rd CIRP International Conference on Manufacturing Systems, Stockholm, Sweden, June. Simon S, Bee G, Moore P R, Pu J and Xie C (2000) “Life Cycle Data Acquisition Unit – Design, Implementation, Economics and Environmental Benefits”. IEEE International Symposium on Electronics and the Environment. Piscataway, NJ, USA, May. pp. 284-289. Ermolov I, Moore P R and Poduraev J (2000) “Modelling and Visualisation for Mobile Robots Working in Severe Environments”. Proceedings IFAC International Symposium MIM 2000 (Manufacturing, Modelling, Management and Control) – Special Workshop on ‘Mobile Robotics’. University of Patras, Hellas, Greece, 12-14th July. Ujvari S and Moore P R (2000) “Using Simulation for the Design of Semi-Autonomous Vehicle Systems”. Proceedings IFAC International Symposium MIM 2000 (Manufacturing, Modelling, Management and Control) – Special Workshop on ‘Mobile Robotics’. University of Patras, Hellas, Greece, 12-14th July. Mann D, Mo J and Moore P R (2001), “A Generalised Strategy for Fault Detection, Diagnosis and Performance Monitoring”. International ICSC Symposium on Intelligent Systems. University of Paisley, Glasgow, Scotland. 26-29th June. Mann D, Mo J and Moore P R (2001), “Application of Non-Linear Signal Analysis Methodology in Fault Diagnosis of Digitally Controlled Equipment”. International ICSC Congress on Advances in Intelligent Data Analysis. University of Wales, Bangor. 19-22nd June. Danielsson F, Schuder J, Moore P R and Eriksson P T (2002). “A Virtual System Using a Control System Emulator to Increase Performance in the Sheet Metal Forming Process”. Mechatronics 2002 International Conference, The 8th UK Mechatronics Forum Conference, University of Twente, Netherlands, 24-26th June. Kango R, Pu J and Moore P R (2002). “Smart Appliances of the Future – Delivering Enhanced Product Life Cycles”. Mechatronics 2002 International Conference, The 8th UK Mechatronics Forum Conference, University of Twente, Netherlands, 24-26th June. Chong S K, Pu J, Moore P R, Wong C B, Chen X and Ng H C (2002). “Run-Time Support Component-Based Framework for Agile Modular Manufacturing Machinery”. Mechatronics 2002 International Conference, The 8th UK Mechatronics Forum Conference, University of Twente, Netherlands, 24-26th June. Wong C B, Chen X, Pu J, Moore PR, Chong S K and Ng H C (2002). “CRC: A Process for Control System Architecture Design”. Mechatronics 2002 International Conference, The 8th UK Mechatronics Forum Conference, University of Twente, Netherlands, 24-26th June. Olofsgard P, Ng H C, Moore P R, Pu J and Wong C B (2002). “VIR-ENG Integration Platform”. Mechatronics 2002 International Conference, The 8th UK Mechatronics Forum Conference, University of Twente, Netherlands, 24-26th June. Moore P R, Chong S K, Pu J, Steiner S, Medland A and De Viq A (2002). “ARMMS – Agile and Reconfigurable Manufacturing Machinery Systems”. Mechatronics 2002 International Conference, The 8th UK Mechatronics Forum Conference, University of Twente, Netherlands, 24-26th June. Nordqvist A R, De Vin L and Moore P R (2002). “Integrating Manufacturing Systems with Their Users”. Mechatronics 2002 International Conference, The 8th UK Mechatronics Forum Conference, University of Twente, Netherlands, 24-26th June. De Vin L, Moore P R, Pu J, Ng H C, Steiner S J, De Vicq A and Medland A J (2002). “Approaches to Agile Manufacturing”. International Manufacturing Conference – IMC – 19, Belfast, Ireland. 28-30 August 2002. Muller K, Schneider A F W, Simon M, Moore P R, Yang K, Pu J, Gall H and Keif T (2002). “Environmental Life Cycle Information Management – Needs for Standardisation”. Going Green - CARE INNOVATION 2002, International Conference. Vienna, 25-28 November, 2002. Kango R, Moore P R and Pu J (2002). “Networked Smart Home Appliances – Enabling Real Ubiquitous Culture.” Fifth IEEE International Workshop on Networked Appliances (IWNA-5), Liverpool, November. Ermolov I, Moore P R, Poduraev J and Shvedov V V (2002), “Sensor-Based Control For Mobile Robots In Extreme Environment”. CSIT ‘02, Proceedings of International Conference Computing Systems and Information Technology, Organiser & Co-Chairman Special Session on ‘Mobile Robotics’ - "Intelligent Control and Information Technology in Mobile Robotics", Patras, Greece, 23-24 September 2002. Kango R, Moore P R and Pu J (2003) “Smart Appliances and Product Service Systems”. Proceedings of International Conference on Computer, Communication and Control Technologies - CCCT ’03 (International Institute of Informatics & Systemics - IIIS). (Awarded Best Paper in Session – Product and Process Control III). Orlando, Florida. 31 July – 2 August 2003. Moore P R, Pu J, Wong C B, Chong S K and Yang X (2003) “A Component-based Development Environment for Life-Cycle Information Management Systems for Consumer Products”. Proceedings of International Conference on Computer, Communication and Control Technologies - CCCT ’03 (International Institute of Informatics & Systemics - IIIS). Orlando, Florida. 31 July – 2 August 2003. Hussein M, Moore P R, PuJ and Wong C B (2004) “Integrated Real -Virtual Environments And Systems”. The 8th UK Mechatronics Forum Conference, Middle East Technical University (METU), Ankara, Turkey. 6-8th September 2004. Chen X, Wong C B, PuJ and Moore P R (2004) “An Approach To Exploit IEC 61131-3 For Component-Based Control System Development”. The 8th UK Mechatronics Forum Conference, Middle East Technical University (METU), Ankara, Turkey. 6-8th September 2004. Wong C B, Chong S K, Moore P R and Pu J (2004), “Review of Remote Delivery of Healthcare Using Pervasive Computing Technologies in the Home”. The 8th UK Mechatronics Forum Conference, Middle East Technical University (METU), Ankara, Turkey. 6-8th September 2004. Chong S K, Moore P R, Wong C B and Pu J (2004) “Equipment Information Management In Connected Homes”. The 8th UK Mechatronics Forum Conference, Middle East Technical University (METU), Ankara, Turkey. 6-8th September 2004. Yang K X, Moore P R, Wong C B and Pu J (2004) “An Innovative Solution for Product-Service Systems for Consumer Products” The 8th UK Mechatronics Forum Conference, Middle East Technical University (METU), Ankara, Turkey. 6-8th September 2004. Yang A, Pu J, Wong C B and Moore P R (2004) "Modelling and Control of Servo Pneumatic Drives using On-Off Valves at Exhaust Port" The 8th UK Mechatronics Forum Conference, Middle East Technical University (METU), Ankara, Turkey. 6-8th September 2004. Pan H, Pu J, Moore P R and Wong (2004) “Modelling and Control of Servo Pneumatic Drives using On-Off Valves at Exhaust Port”. The 8th UK Mechatronics Forum Conference, Middle East Technical University (METU), Ankara, Turkey. 6-8th September 2004. Ermolov I L, Moore P R and Poduraev J V (2004) “Intelligent sensor-oriented mobile robotics for pipeline inspection”. The MED-2004 IEEE International Conference on Control and Automation. Special Session: Intelligent Mobile Robotics and its Components. Invited Paper. Ephesos, Turkey, June 6-9th 2004. Yang A, Pu J, Wong C B and Moore P R (2004) “Control Methods for Energy Efficient Pneumatic Servos Employing Asymmetric Cylinders”. The 7th Biennial ASME International Conference. ESDA, Sheffield University, UK. 19-22 July 2004. Yang, K. X., Moore, P. R., Wong, C.B., Pu, J., Chong, S. K. and Simon, M (2004) “A Methodology for Implementing Product-Service Systems for Consumer Products”, Proceedings of SusProNet Internal Conference, Product Service Systems: Practical Value, 3-4 June 2004, Brussels, Belgium. Available: http://www.suspronet.org Gustavsson P et al (Moore P R and Eriksson) (2004) “Towards Service Oriented Simulation”. 2004 Fall Simulation Interoperability Workshop. Sponsored by The Simulation Interoperability Standards Organisation (SISO). Holiday Inn, International Drive, Orlando, Florida, USA. 19-24 September. A.H.C. Ng, L.J. De Vin, M. Sundberg, F. Oldefors, P.R. Moore and S. Yeo (2004) “An integrated environment for machine system simulation, remote monitoring and fault detection”, Proceedings of the 1st International Conference on Informatics in Control, Automation and Robotics, August 25-28, Setúbal, Portugal, Volume 2, pp. 150-157. Simon, M., Allman L., Moore, P.R., Yang. K.X., Cock, T. (2004) “Product design informed by life cycle information: initial results from ELIMA”, Accepted by the 2nd International Conference on Manufacturing Research (ICMR2004), September,7-9, Sheffield Hallam University. Bodenhoefer, K., Schneider, A., Cock, T., Brooks, A., Sands, G., Allman, L., Simon, M., Chong, S.K., Yang. K.X, Delannoy, O., Catanese, B., Mueller, K., (2004) “Environmental Life Cycle Information Management and Acquisition: First Experiences and Results from Field Trials ” Accepted by conference “ Electronics Goes Green 2004+”, September 6-8, 2004, Berlin, Germany. A.H.C. Ng, L.J. De Vin, M. Sundberg, F. Oldefors, P.R. Moore and S. Yeo (2004). “An integrated environment for machine system simulation, remote monitoring and fault detection”. Proceedings of the 1st International Conference on Informatics in Control, Automation and Robotics, August 25-28, Setúbal, Portugal, Volume 2, pp. 150-157. De Vin L J, Andler S F, Ng H C, Moore P R, Pu J and Wong C B. (2005) “Information Fusion: What can the manufacturing industry learn from the defence industry.” Proceedings of IMC22 at IT-Tallaght, Dublin, Ireland, pp 363-371. Solding P, Petku and Moore P R (2005). “Applying Energy Aspects on Simulation of Energy-Intensive Production Systems”. ‘Proceedings of the 2005 Winter Simulation Conference’. Yang X, Moore P R and Pu J (2007). “Service Enabler: A Software Agent using Lifecycle Data to Enable Knowledge-Intensive Services”. Proceedings of IEEE International Conference on Semantics, Knowledge and Grid, 29-31, Xi’an, 2007. Heywood F, Allen T, Moore P R and Longden C (2007). “An Integrated Methodology for Establishing the Health-related Cost Benefits of Housing Adaptations and Other Housing Interventions for Older People (The AIMWELL project)”. European Network for Housing Research. Full paper. Syberfeldt A, Grimm H, Ng A and Moore P R (2008). “Multi-Objective Evolutionary-Optimisation of a Real-World Manufacturing Problem”. Proceedings of Flexible Automation and Intelligent Manufacturing (FAIM 2008), International Conference, Skovde, Sweden. Syberfeldt A, Ng A. John R I and Moore P R (2008). “A Parallel Surrogate-Assisted Multi-Objective Evolutionary Algorithm for Computationally Expensive and Noisy Optimisation Problems”. Proceedings of 2008 IEEE Congress on Evolutionary Computation (IEEE CEC 2008) within 2008 IEEE World Congress on Computational Intelligence (WCCI 2008). WCCI2008 EC0701. Hong Kong. Gustavsson P M, Niklarsson L, Moore P R and Eriksson P (2008). “Tactical Simulation Object – Enabling Joint Crisis Management Training”. 2008 Spring Simulation Interoperability Workshop (SIW). SISO, Providence, Rhode Island, USA. Paper: 08S-SIW-018. 2008 SIWZIE Award – winning paper. Gustavsson P M, Hieb M R, Niklasson L, Moore P R and Eriksson P (2008). “Formalising Operations Intent and Effects for Network-Concentric Applications”. Gustavsson P M, Niklarsson L, Moore P R and Eriksson P (2008). “Representing Commanders Intent for Machine Interpretation”. Accepted for HICSS-42, January 5-8 2009. Paper reference 1211. Track: Decision Technologies and Service Systems – Net-Concentric Decision Support Environments. Gustavsson P M, Hieb M, Eriksson P, Moore P R and Niklasson L (2008). “Machine Interpretable Representation of Commanders Intent”. Proceedings of 13th ICCRTS: C2 for Complex Environments. Topic 9: Collaborative Technologies for Network Centric Operations; Topic 2: Modelling and Simulation; Topic 8: C2 Architectures. Best Student Paper Award. July 2008. Andersson M, Ng A H C, Grimm H (2008). “Simulation Optimisation for Industrial Scheduling using Hybrid Genetic Representation”. Proceedings of the 2008 Winter Simulation Conference. Eds: Mason S J, Hill R, Moench L and Rose O. Yang A, Pu J, Wong C B and Moore P R (2008). “Semi-closed Circuit Control to Improve Energy Efficiency of Pneumatic Drives”. Proceedings of ASME – Engineering Systems Design and Analysis (ESDA’08) Conference. Frantzen M, Ng H C and Moore P R (2010), “A Simulation-based Scheduling System for Real-time Optimisation and Decision Making Support”. Selected Best Paper – Flexible Automation and Intelligent Manufacturing (FAIM) 2010 International Conference, Oakland, USA. Wang L., Adamson G., Holm M. and Moore P R., "Current Status of Function Blocks for Process Planning and Execution Control of Manufacturing Equipment", Proceedings of the 21st International Conference on Flexible Automation and Intelligent Manufacturing(FAIM), Taiwan. Vol.2, pp.963-973, June 2011. Holm,M., Adamson, G., Wang L. and Moore P R. (2012) An IEC 61499 Function Block based Approach for CNC Machining Operations, Proceedings of the 13th Mechatronics Forum, Vol.1, pp.115-121, September 2012. ISBN 978-3-99033-042-5 Adamson, G., Holm, M., Wang L. and Moore P R. (2012) Adaptive Assembly Feature Based Function Block Control of Robotic Assembly, Proceedings of the 13th Mechatronics Forum, Vol.1, pp.8-13, September 2012. ISBN 978-3-99033-042-5 Holm M., Adamson G., Wang L., and Moore P R. (2014) Framework for an Adaptive Decision Support System for Industrial Shop-Floor Operators. 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) 2014, San Antonio, Texas, USA (May 20-24 2014) Holm M., Adamson G., Wang L. and Moore P R. (2014) The Future Swedish Shop-Floor Operator – Interviews with Production Managers. Swedish Production Symposium 2014 (SPS 2014), Chalmers University, Gothenburg, Sweden. 16-18 September 2014. Adamson G., Wang L., Holm M., and Moore P R. (2014) Adaptive Robotic Control in Cloud Environments, 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) 2014, San Antonio, Texas, USA (May 20-24 2014). Adamson G., Wang L., Holm M., and Moore P R. (2014) Function Block Approach for Adaptive Robotic Control in Virtual and Real Environments. The 14th Mechtronics Forum International Conference – Mechatronics 2014 (MX2014). University of Karlstad, Sweden (June 2014). Wong C B, Niami I, Chen X and Moore P R (2014). “Multimodal approach for non-tagged indoor identification and tracking using smart floor and pyroelectric infrared sensors”. IEEE Conference... Adamson G., Wang L. and Moore P R. (2015) Adaptive Control as a Service in Cloud Manufacturing. Submitted to ASME Conferences, MSEC2015. Directory: sites -> default -> files -> staff-downloads files -> Northern England’s set-jetting locations files -> Nstructions for Acquiring Excess Equipment online, through the 1033 Program files -> Occupational health and safety files -> The Black Panther Party’s Ten Point Program files -> International programs roel profile files -> Fermi Questions a guide for Teachers, Students, and Event Supervisors Lloyd Abrams, Ph. D. DuPont Company, cr&D/ccas experimental Station Wilmington, de 19880 files -> Personal Information Name: Maha Al-Ammari Nationality: Saudi Relationship Status staff-downloads -> John Hall curriculum vitae address Download 319.53 Kb. Share with your friends:
|