(h) Radar Detector Installation Lump Sum

(h) Radar Detector Installation Lump Sum

(i) Service Cabinets Lump Sum

(j) Variable Speed System Cabinets Lump Sum

(k) Battery Back-Uup Lump Sum

(l) Common Electrical Work Lump Sum

Item (h) includes furnishing and installing radar detector, radar detectors, Class 4 wood poles, surge protectors, power supplies, circuit breakers, media converter,terminal cabinet, mounting hardware, and cables, and all incidental materials necessary to install equipments. Bid item also includes site acceptance testing and of traffic sensors. Payment for pole and foundation will be included in payment under Section 00965 and Section 00970.

• 
  Install Agency-furnished provided pan-tilt-zoom cameras. F and furnish and install UTP transceiver, mounting brackets, lowering device and cabling.
  
• 
  Furnish all material for the installation of two additional cameras. Installation of these two cameras will be done by others. A list of required material will be given to the contractor by the Engineer. Deliver the material to the ODOT Region 1 office at 123 NW Flanders, Portland, OR, 97209. Call Dennis Mitchell at 503-731-8218 48 hours prior to delivery.
  
• 
  Install camera video, data, and power cabling between the camera and the communications cabinet shown on the plans.
  
• 
  Configure new video cameras. D and demonstrate camera viewing and control capabilities.
  
• 
  Conduct final testing.
  

AWG - American Wire Gauge

bps - Bits per second

CCT - Camera Control Transmitter

CCTV - Closed Circuit Television

dB - Decibel

EIA - Electronics Industries Association

Hz - Hertz

NEC - National Electrical Code

NEMA - National Electrical Manufacturers Association

NTSC - National Television Standards Committee

ODOT - Oregon Department of Transportation

PTZ - Pan/Tilt/Zoom

REA - United States Rural Electrification Administration

RG - Radio Grade

THWN - Moisture and Heat Resistant Thermoplastic with Nylon Jacket Conductor

TMOC - Traffic Management Operations Center

UL - Underwriter’s Laboratory

VAC - Volts, Alternating Current
(b) Definitions:
Closed Circuit Television Assembly (CCTV) - Camera, lens, environmental enclosure (housing), mounting bracket, camera support, and necessary connectors and cables.

Integrated System Testing - Testing associated with the functional performance of the system with and all subsystems composing the system properly interconnected and powered; testing of the complete system with all elements working together.

Pan/Tilt/Zoom Unit (PTZ) - Unit for moving CCTV camera via remote control to view a particular scene.

Video Control System - Interface to system software allowing user input through check boxes, icons, and/or radio buttons in a graphical manner within a Windows NT format.
00996.02 Overview and System Operation - The video system will enable traffic personnel to remotely monitor incidents and traffic in the project vicinity. The video will be transmitted to the ODOT Region 1 TMOC via wireless cellular transmission equipment.
00996.03 System Equipment - Equipment to be installed includes, but is not limited to:

• 
  CCTV Cameras (Agency -furnishedprovided) including dome housing and, lens, pan/tilt assembly and UTP transceiver
  
• 
  CCTV Wiring (video/data/power)
  
• 
  CCTV Camera Power Supply
  
• 
  Video Encoder (Agency-furnished)
  
• 
  Cabling to connection to wWireless cellular modemrouter (Agency provided)
  

• 
  Camera Lowering System
  

• 
  Factory Mutual Approval Guide, 1999 Edition
  
• 
  Underwriters Laboratory Electrical Appliance and Utilization Equipment Directory
  
• 
  Underwriters Laboratory Construction Materials Directory.
  

The product shall bear the listing organization’s label. In the absence of a label, provide documentation verifying product listing.

• 
  OSHA documentation which demonstrates recognition.
  
• 
  Laboratory documentation that verifies testing in accordance with national code or standard.
  

Add the following subsection:

Fifteen working days prior to planned disruptions of any existing system, circuit, or equipment, submit to the Engineer for approval a written Disruption Request. Each Disruption Request shall include the system(s) to be affected, the disruption start date and time, and the estimated duration required. Approval or rejection of the Disruption Request will be returned to the Contractor in writing by the Engineer at least five working days prior to the proposed start of the disruption. The Engineer may reject a requested time or duration and verbally recommend an alternate time or duration agreeable to by both the Contractor and the Contracting Agency.

Any unplanned disruptions, caused by the actions of the Contractor or his representative(s), shall be corrected by the Contractor at no additional cost to the Contracting Agency.
00996.06 Warranty - Assign all warranties for material installed under this project to ODOT.,

All materials shall have a minimum one year warranty. Designate that the warranty period starts with delivery of the material to the construction or stockpile site. Where the Contractor can not obtain a 12 month minimum warranty, written approval of the Engineer is required for use of the equipment.

• 
  DIN-rail mount
  
• 
  120 VAC input
  
• 
  12 VDC output
  
• 
  2 amps output total (two 1 amp power supplies may be used) supplied shall include two 24VAC outputs and shall be suitable for the camera and heater/blower. The power supply shall be a Pelco WCS Series Outdoor, 24 VAC power supply or an approved equal.
  

• 
  Have one four-conductor (two twisted pairs), 24 AWG, tinned copper, 7x32 stranded conductors; aluminum shield plus a 90% tinned copper braid shield; 24 AWG, tinned copper drain wire, 7x32 stranded conductors; and PVC jacket for camera control
  
• 
  Have one non-paired 600V Type TC, three-conductor 14 (or as recommended by the manufacturer) AWG, copper, 7x18 stranded conductors and PVC jacket for power.
  
• 
  Have one RG-59 coaxial cable, 75 ohm with 22 AWG solid, bare-copper-center conductor, 95 percent bare-copper-braided shield, suitable for wet locations.
  
• 
  Be appropriate for outdoor and direct burial use
  

• 
  20 kA nominal discharge surge current (10 kA each, Core-Shield and Core-Ground)
  
• 
  Aluminum IP20 housing
  
• 
  75-Ohm BNC in/out connections
  
• 
  -40 to 80 degrees C temperature range
  

The following system components to be provided by the Contractor. All system components with printed circuit boards (PCBs) will have conformal coating on the PCBs.

• 
  Iinstalled without damaging conductors or insulation;
  
• 
  Iinstalled without kinks;
  
• 
  Hhandled in accordance with manufacturer’s specifications and recommended bending radius;
  
• 
  rRun continuously between terminations without splices;
  
• 
  iInstalled with sufficient slack for equipment movement;
  
• 
  nNeatly tagged at both terminations to indicate source, destination and function.
  

Payment
00996.90 Payment (Lump Sum Basis) - The following item will be paid for at the contract lump sum amount:

Payment will be payment in full for includes installing Agency-furnished camera equipment, and furnishing and installing the temperature humidity and precipitation sensors, sensor control and cables, brackets, mounting hardwares, installing the camera, camera controls, cables,surge protective device, camera power supply, and all equipment and materials, furnishing permits, trench excavation and backfilling, furnishing and installing conduits, service equipment, communication and service wire and cables, junction boxes, testing, tools, labor, and incidentals necessary to complete the work as specified and shown on project plans..