Sr. No.
|
Item of work
|
Sd.Sp.No. / Page No.
|
Additional Specification.
|
1
|
2
|
3
|
4
|
48
|
Providing and fixing white glazed earthenware Wash Hand Basin of 55 cm x 40 cm size Hindware Make or equivalent including cold water piller tap,Jaquar make or equivalent brackets, rubber plugs and brass chain, stop tap, chromium plated bottle trap and necessary pipe connections including UPVC waste pipe and trap upto the out side face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)
|
Spec.No.: Bd.V.30/Page No. 565
|
|
49
|
Providing and fixing 10cm C.I.Nahani Trap (long arm) including symet grating, bend, connecting piece of C.I.pipe upto the outside face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)
|
Spec.No.: Bd.V.32/Page No.567
|
|
50
|
Providing and fixing 15 cm x 10 cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including symet grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with R.C.C. lid and Symet grating for the gully trap, testing etc. complete.
|
Spec.No.: Bd.V.38/Page No.572
|
|
51
|
Providing and fixing UPVC SOIL / VENT / WASTE SWR pipe of required diameter conforming to I.S.-13592, and I.S.-4985 to withstand continous internal hydroulic pressure of 4 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)
|
|
Spec.No.: As directed by Engineer- in-charge.
|
|
(a) 75 mm dia. Pipe
|
|
|
|
(b) 110 mm dia. Pipe
|
|
|
|
(c ) 160 mm dia. Pipe
|
|
|
52
|
Providing and fixing on walls/ ceiling/floors, medium grade G.I. pipe (type) having embossed ISI Mark on it, of required diameter with screwed sockets, joints, necessary galvanised iron fittings such as sockets,back nuts,elbows, bends, tees, reducers, enlargers, plugs, clamps etc.including necessary drilling holes in walls, slabs etc. and remaking good the demolished portion to restore the same in original condition neatly and providing and applying anticorrosive primer and two coats of oil painting, testing, etc.complete.(Prior approval of sample by Ex.Engineer is necessary before use.)
|
Spec.No.: Bd.V.5/Page No.551
|
|
Sr. No.
|
Item of work
|
Sd.Sp.No. / Page No.
|
Additional Specification.
|
1
|
2
|
3
|
4
|
|
(i) 15 mm dia.
|
|
|
|
(iii) 25 mm dia.
|
|
|
|
(vi) 40 mm dia.
|
|
|
53
|
Providing and laying in trenches medium grade (type) galvanised iron pipe having embossed ISI Mark on it, of required diameter with screwed, sockets, joints, necessary galvanised iron fittings such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps etc. including necessary excavation, back filling, fixing with clamps, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)
|
Spec.No.: Bd.V.5/Page No.551
|
|
|
(i) 15 mm dia.
|
|
|
|
(iii) 25 mm dia.
|
|
|
54
|
Providing and fixing 15 mm dia. Screw down bib/stop tap of Jaquar make or equivalent long body including necessary sockets, union nut, testing etc. complete.(Prior approval of sample and brand by Ex. Engineer is necessary before use.)
|
Spec.No.: Bd.V.8/Page No.554
|
|
55
|
Providing and fixing screw down 25 mm dia. wheeled stop tap of brass including necessary sockets, union nut, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)
|
Spec.No.: Bd.V.9/Page No.555
|
|
56
|
Providing and constructing Brick Masonry Inspection Chamber 60 cm x 45 cm including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels, Brick Masonry, plastering from inside and air- tight R.C.C. lid with frame fixed in cement concrete, curing, testing etc. complete.
|
Spec.No.: Bd.V.43./Page No.574
|
|
57
|
Providing and constructing Brick Masonry Inspection Chamber 90 cm x 45 cm including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels, Brick Masonry, plastering from inside and airtight R.C.C.lid with frame fixed in cement concrete, curing, testing etc. complete.
|
Spec.No.: Bd.V.43./Page No.574
|
|
58
|
Providing and fixing in postion unplasticized polyvinyl chloride (UPVC) ultra violet stabilized 110 mm outer diameter cowl dome conforming to I.S.4985 including making joints with solvent cement etc. complete.
|
|
Spec.No.: As directed by Engineer- in-charge.
|
Sr. No.
|
Item of work
|
Sd.Sp.No. / Page No.
|
Additional Specification.
|
1
|
2
|
3
|
4
|
59
|
Providing soak pit of size 120 cm x 120 cm x 120 cm including excavating and filling with brick bats as per drawing etc. complete.
|
Spec.No.: Bd.V.46/Page No.576
|
|
60
|
Providing and fixing 450 mm x 550 mm size superior type mirror with 16 mm dia. Nickel plated towel rod etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)
|
|
Spec.No.: As directed by Engineer- in-charge.
|
61
|
Providing and fixing fittings and accessories such as ball cock, over flow pipe with mosquito proof coupling, scour pipe with plug, manhole with cover and locking arrangement, connecting pipes and embedding intake and outflow pipes into the R.C.C. water reservoir
|
Spec.No.: Bd.V.18/Page No.558
|
|
62
|
Providing and Fixing collapsible steel gates in two leaves with channel pickets, pivoted flat bars, including top and bottom guides, rollers, stoppers, handles, all fitting accessories, locking arrangement and one coat of red lead primer etc. complete.
|
Spec.No. : Bd. T. 57/Page No. 511.
|
|
63
|
Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete
|
Spec.No.: Bd.L.1/Page No.367
|
|
64
|
For Bore Well :-
|
|
.
|
|
I ) Drilling of 150 mm diameter Borewell -
|
|
All materials used shall be got approved
|
|
ii) Providing and fixing casing of 150 mm diameter Cast Iron.
|
|
|
|
iii ) Testing of Yield of Water.
|
|
|
|
iv ) Providing and fixing hand pump.
|
|
|
|
v ) Chemical analysis testing charges for water …… etc. complete.
|
|
|
|
|
|
|
65
|
Sofa Set - ( 3 + 1 + 1 )
|
|
|
|
Providing Sofa Set of T.W. Frame work with 18 mm commercial Ply seat back . Specification made of imported rubber wood pure leather of black colour cushion of foam and steple fibre use with high density foam with approved colour & make complete.
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.
|
66
|
Chair for Sub -Register :-
|
|
|
|
Providing & fixing high back leatheraite Adjustable arms, multi lock, Nylon Glass fill castors, and Nylon base, etc. complete.
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.
|
Sr. No.
|
Item of work
|
Sd.Sp.No. / Page No.
|
Additional Specification.
|
1
|
2
|
3
|
4
|
67
|
Chair for Staff & Visitor :-
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.
|
|
Providing & fixing Mid back , Synchronized Mechanism , fully Adjustable etc. complete.
|
|
Spec.No.: As directed by Engineer- in-charge.
|
68
|
Sub-Registar Table ( 2.00 x 0.90 x 0.75 Mtr. )
|
|
|
|
Providing & fixing Sub-Registar Table top to be made up of 36 mm thick post frm MDF Board. Gable End to be made up of 36 mm thick post form M.D.F Board. Modesty Panel to be made up of 25 mm thick Prelaminated M.D.F. board with PVC edge band . Keyboard Tray. ( Without mouse tray ) Prelaminated MDF board with PVC edge band. 1 Drawer & 1 shutter top supported pedestal to be made upto of 18 mm prelaminated MDF board. Foot Rest to be made up of 18 mm prelaminated MDF board. Front Screen to bemade up of 18 mm prelaminated MDF board, etc. complete.
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made
|
69
|
Office Table for Staff - 1.20 x 0.75 x 0.75 mtr.
|
|
|
|
Providing & fixing Office Table, Top to be made up of 25 mm thick prelaminated particle board with PVC with edge band on all sides, Gable End & Modesty panel to be made up of 25 mm thick prelaminated particle board with PVC with edge band. 1Drawer & 1 Shutter top supported padestal to be made up of 18 mm prelaminated particle board. Key board Tray ( without mouse Tray ) to be made up of 18 mm prelaminated particle board etc. complete.
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made
|
70
|
Office Name Board - ( 0.90 x 0.90 Mtr.)
|
|
|
|
Providing & fixing Office Name Board to be made wooden frame & CRCA Black painted board, etc. complete.
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.
|
71
|
Office Furniture :-
|
|
|
|
I ) Steel Bench - With M.S. Sheet Top- Size -1830 x 406 x 450
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.Spec.No.: As directed by Engineer- in-charge.
|
|
II ) Steel Stool - With M.S.Sheet Top Size - 305 x 305 x 553 mm.
|
|
|
|
III ) Metal Shelving Racks - Closed type - size - 1800 x 900 x 375 mm
|
|
|
|
IV ) Steel Cupboard ( Major ) with locker - size - 1980 x 915 x 485 mm
|
|
|
|
Fire Fightening :-
|
|
|
72
|
Providing and fixing CO-2 type Fire Extinguisher of 4.50 kg capacity as per I.S.13849 ISI marked on it.
|
|
All material used shall be got approved from Engineer in-charge.
Work shall be executed as directed by Engineer-in-charge.
Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.
|
73
|
Providing and fixing ABC stored presured type Fire Extinguisher asper I.S.13849 ISI marked on it.
|
|
Spec.No.: As directed by Engineer- in-charge.
|
Sr. No.
|
Item of work
|
Sd.Sp.No. / Page No.
|
Additional Specification.
|
1
|
2
|
3
|
4
|
74
|
Computer Table – 1.20 x 0.60 x 0.75 Mtr. )
|
|
|
|
Providing & fixing Computer Table Top to be made up of 25 mm thick Prelaminated particle board with PVC edge band on all sides. Gable End & Modesty panel to be made up of 25 mm prelaminated particle board with PVC with edge band. Keyboard Tray ( Without ) mouse Tray ) to be made up of 18 mm prelaminated particle board. 1 Drawer & 1 CPU self top supported Unit to be made up of 18 mm prelaminated particle board , etc. complete
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.Spec.No.: As directed by Engineer- in-charge.
|
75
|
Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete. (Sample and brand is to be got approved from Ex. Engineer before use)
|
Spec.No.: Bd.O.8/Page No.406
|
|
76
|
Providing and fixing Vartical Vanitian blinds of 100 mm thick fixed on aluminium chanal fabric of vertical blinds of good quality and colour, texture, material approved from architect as per design including fixturesand fastenings etc. complete.
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.Spec.No.: As directed by Engineer- in-charge.
|
77
|
Compactor
|
|
|
|
Providing and fixing Single Static Drive Cover Unit 2 Bay will have undercarriage structure, 2 Nos storage unit which 8 Nos adjustable Shelves with cover unit. Single last Drive Unit 2 Bay will have undercarriage structure, 2 Nos storage unit which 8 Nos. adjustable Shelves cover unit with hand Wheel & Chain set & locking Stiffener. Twin Mobile Drive Unit 2 Bay will have undercarriage structure, 4/16 Nos storage unit which 16/64 Nos. adjustable shelves, cover unit with hand wheel & chain set. Rail Channel, etc. complete. Godrej make or eqivalent.
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.Spec.No.: As directed by Engineer- in-charge.
|
78
|
Reception Writing Table ( 1.20 x 0.60 x 0.75 Mtr.)
|
|
|
|
Providing & fixing Reception Writing Table Top to be made up of 25 mm thick Prelaminated particle board with P.V.C. edge band on all sides, Gable End & Modesty panel to be made up of 25 mm thick Prelaminated particle board with PVC with edge band , etc. complete.
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.Spec.No.: As directed by Engineer- in-charge.
|
79
|
Suggesion Box - 0.40 x 0.10 x 0.50 M.)
|
|
|
|
Providing and fixing Suggesion Box to be made up of 18 mm thick prelaminated particle board with lock & Key arrangement, etc. complete.
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.Spec.No.: As directed by Engineer- in-charge.
|
80
|
Wall Mounted Notice Board - ( size - 1.20 x 1.20 Mtr. )
|
|
|
|
Providing and fixing Wall Mounted Notice Board to made up of Aluminium frame & soft board with fabric wrapped, etc. complete.
|
|
All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.Spec.No.: As directed by Engineer- in-charge.
|
81
|
Chair for Receiption Area -
|
|
|
|
Providing & fixing 3 Seater Perforsted Louge Sofa, ChromeFinish with Leatherite seating, etc.complete.
|
|
. All material used shall be got approved from Engineer in-charge. Work shall be executed as directed by Engineer-in-charge. Only approved material & samples shall be used. User Deptt.has approved specific type quality of Table/Chairs / Storage etc. only such furniture shall have to be provided. If any furniture is found of inferior quality , poor workmanship, it shall have to be replaced by approved quality & type of furniture , otherwise no payment will be made.
Spec.No.: As directed by Engineer- in-charge.
|
82
|
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete. (Sample and brand is to be got approved from Ex. Engineer before use)
|
|
Spec.No.: As directed by Engineer- in-charge.
|
83
|
Providing and applying two coats of synthetic enamel paint of approved colour to old structural steel work and wood work in buildings including scaffolding if necessary, cleaning and preparing the surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)
|
|
Spec.No.: As directed by Engineer- in-charge.
|
84
|
a) Providing and fixing for Frosted glass panels 5.5 mm thick for all size including putty, C.T. beading etc. complete.
|
|
Spec.No.: As directed by Engineer- in-charge.
|
85
|
Providing & Fixing mild steelgrill railing of 20 kg/Sqm. with 50mm dia. MS Pipe hand rail & sill of 25mm x 3mm & newel posts for staircases, including fabricating, fixtures, erecting the grill work with one coat of anticorrossive paint & two coats of oil painting of approved colours to the sill, hand rail and the newel post.
|
|
Spec.No.: As directed by Engineer- in-charge.
|
86
|
Providing and laying 25mm thick precast polished chequered coloured cement tiles 25 cm x 25 cm x 20 mm thick of approved colour and pattern with white and coloured marble chips upto maximum size 6mm for flooring in required position set on bed of C.M. 1:6 including neat cement float, filling joints with neat coloured cement slurry, curing polishing and rubbing complete.
|
Spec. No. Bd.M.33(a) Page No. 392
|
|
87
|
Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.
|
|
Spec.No.: As directed by Engineer- in-charge.
|
88
|
Scraping out old white wash/colour wash/distemper by brushing and or scraping by sand paper and preparing the wall surface for applying full putty of approved make to complete surface, scraping with sand paper and making smooth surface to receive further painting coats etc. complete.
|
|
Spec.No.: As directed by Engineer- in-charge.
|
89
|
Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)
|
Spec.No.: Bd.O.6/Page No.406
|
|
90
|
Providing and fixing black Kadappa stone steps, 25 mm thick machine polished, cutting rounding corners, groove on edges laying in position jointing with neat cement slurry on cement mortar bedding in cement mortar 1:4 proportion curing etc. complete.
|
Spec.No.: Bd.M.22/Page No.390
|
|
91
|
Supplying and fixing in position aluminium extruded section Two track sliding windows upto 1.2 metre height, outer frame made from section of over all size 62 mm x 45 mm, bottom section with or without drain section, track weighing 0.90 kg per metre and top and side section weighing 0.838 kg per running metre with shutter or sections made of 19 mm x 40 mm size having average weight of 0.6 kg per running metre(or as required size) with change in proportionate weight,with 5.00 mm selected quality plain sheet glass fixed with new neoprene gasket shutters to be provided with nylon encased stainless rollers, necessary locks and handles complete. (As per Architect's drawing no.Job No. T- MISC/5000 Drg.No.22 dated 3.2.1992) ( Jindal Make or eqivalent.)
|
|
Spec.No.: As directed by Engineer- in-charge.
|
91
|
a) Providing and fixing in position Double anodised alluminium windows / ventilators of various size with openable / sliding aluminium frame, 5 mm thick plain sheet glass shutter, glazing clips / neoprene / rubber / PVC Gasket of approved quality, chromium plated brass wigs, other aluminium fixture and fastenings,handle, stopper etc. complete including making the damaged structure to its original condition. (Sample to be got approved from Ex. Engineer before use) (Jindal Make or eqivalent.)
|
|
Spec.No.: As directed by Engineer- in-charge.
|
92
|
Providing, hoisting and fixing in position of approved make high density polyethylene UV stabilized conforming to I.S.12701, water storage tank with necessary connections, testing etc. complete. (Prior approval of sample by Ex. Engineer is necessary before use.)
|
|
Spec.No.: As directed by Engineer- in-charge.
|
93
|
a) Providing and fixing for Clear glass panels 5.5 mm thick for all size including putty, C.T. beading etc. complete.
|
|
Spec.No.: As directed by Engineer- in-charge.
|
94
|
Providing and applying three coats of synthetic enamel paint of approved colour to new and old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (including primer coat) complete. (Sample and brand is to be got approved from Ex. Engineer before use)
|
Spec.No.: Bd.O.5/Page No.405
|
|
95
|
Providing and fixing 10 cm Rigid PVC Nahani Trap including PVC grating, bend, connecting piece of P.V.C.pipe of required diameter, pipe up to the outside face of the wall, making good the holes and repairs, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)
|
|
Spec.No.: As directed by Engineer- in-charge.
|
96
|
Providing sills of polished Kaddappa stone 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with slurry, curing, polishing, rounding edges, cleaning complete.
|
Spec.No.: Bd.M.29/Page No.391
|
|
CONTRACTOR
|
SUB-DIVISIONAL OFFICER
PUBLIC WORKS SUB-DIVISION
BHANDARA
|
EXECUTIVE ENGINEER
WORLD BANK PROJECT DIVISION
NAGPUR
|
Government of Maharashtra
Public Works Department
Nagpur Region, Nagpur
Public Works Circle, Nagpur
World Bank Project Division, Nagpur
Tender Papers
Name of work
RENOVATION AND REPAIRS TO JOIN DISTRICT REGISTRAR CLASS-I, SUB-REGISTRAR CLASS-II AT BHANDARA & SUB-REGISTRAR OFFICES AT MOHADI, TUMSAR, LAKHANDUR, LAKHANI & PAUNI IN BHANDARA DISTRICT
Name of AGENCY: ________________________________________
Agreement No. : ________________________________________
Contractor No of Correction Executive Engineer
Share with your friends: |
