This step-by-step guide leads you through the process of activation and configuration of the Wildix system



Download 9.64 Mb.
Page19/43
Date05.05.2018
Size9.64 Mb.
#48211
1   ...   15   16   17   18   19   20   21   22   ...   43

4.2. Master and Slave configuration


Important: If PBXs are remote and communicate via Internet, forward the ports 443 TCP and 1194 UDP on the router of the Master PBX to the IP address of the Master.
Go to Settings > PBX > WMS Network.
Master configuration

  • PBX mode: Master

  • MTU: the size of the largest protocol data unit that the can be passed on VPN (MTU = maximum transmission unit)

  • Login: set up the Login (must be the same on Master and Slaves)

  • Password: set up the Password (must be the same on Master and Slaves)



Slave configuration

  • PBX mode: Slave

  • Master PBX IP: specify the WAN IP of the Master PBX (or the *.wildixin.com domain name)

  • MTU: same as on Master PBX

  • Login: same as on Master PBX

  • Password: same as on Master PBX


NOTE: Go to Users > PBXs to view the PBXs in your WMS network; on this page you can find the URL addresses by which you can reach each PBX in your WMS Network.


NOTE: Enabling WMS Network will delete users and groups from the Slave.
In case you enable WMS Network on a Slave PBX that had been previously in use, users and groups will be deleted from the Slave. To restore the existing users, follow these steps:

  1. Export the CSV file of users of the Slave

  2. Enable WMS Network

  3. Import CSV file of Slave users to the Master

  4. Access the Slave and move the newly exported users from the Master to the Slave

PART 5. Users
5.1. Add / Import users

Appendix 2: User preferences
It is possible to add users manually or import them from MySQL / MSSQL, LDAP / AD, Google, Office 365, Exchange Server, CSV file.



Download 9.64 Mb.

Share with your friends:
1   ...   15   16   17   18   19   20   21   22   ...   43




The database is protected by copyright ©ininet.org 2024
send message

    Main page