This step-by-step guide leads you through the process of activation and configuration of the Wildix system
Provisioning modes supported by Wildix PBX
Download 9.64 Mb.
|
- Navigate this page:
- 6.1.1 Auto-configuration via auto.wildixin.com
- Appendix 3: Network configuration for auto.wildixin.com provisioning
- Appendix 4: Auto-configuration of W01GSM with auto.wildixin.com
6.1. Provisioning modes supported by Wildix PBXWildix PBX supports three provisioning modes: Auto-configuration via auto.wildixin.com of Wildix devices connected to the same network as the PBX (supported by Wildix devices starting from a certain FW version) Auto-provisioning of Wildix devices connected to the local LAN or remote network via VPN Remote provisioning of remote/unreachable devices behind NAT/firewall In this chapter we will learn how to provision: Wildix gateways (PRI, BRI, W01GSM, FXO, FXS) WP4X0 Wildix phones W-AIR base stations After the devices have been provisioned, follow the procedure to assign WP4X0 and Analog ports to users - chapter 7. For provisioning of WP600A/WP600ACG - see the chapter 7 right away. After you have provisioned W-AIR base stations, follow the procedure to log in W-AIR handsets described in chapter 8. 6.1.1 Auto-configuration via auto.wildixin.comAuto-configuration of Wildix devices in the same network as the PBX For more information about network and WMS configuration, see Appendix 3. For auto-configuration of W01GSM, see Appendix 4. Go to Devices > Devices Connect WP4X0 Wildix phones and media gateways to the Switch. Provisioned devices appear in the table: How to understand that devices have been provisioned: They have received the IP address (column “IP Address”) Device’s model is correctly indicated (column “Model”) Wildix phones (WP) display “loginX” on the screen, which means they are ready to be assigned to users (column “Phone”) 
1 - “+Add”: Add a new device via Auto-provisioning or Semi-provisioning mode 2 - “Edit”: Edit one or multiple devices (set up Default Tone for FXS media gateways, DNS server, NTP Server and Zone, set up Voice VLAN, CoS voice priority, Data VLAN, CoS data priority and other parameters) 3 - “-”: Delete one or multiple devices 4 - “Configure / Sync device”: send configuration to one or multiple devices 5 - “Assign to user”: assign WP4X0 and W01FXS to users 6 - “i”: The icon “i” and the blue color indicates that there is a new firmware version available To update the firmware: select one or more devices and click “Configure/Sync device” button (during the FW upgrade procedure devices are rebooted). 7 - “Connect”: Enable / disable access to device To enable/disable connection to device: Click on the green triangle icon “Connect” to allow the connection to this device Click on the link “Open” to connect to the device’s web interface Click on the red square icon “Disconnect” to close the access to the device 
8 - “Phone”: “loginX” available for WP4X0 phones and W01FXS gateways means that devices are not assigned to users; otherwise extension number of user is displayed 9 - “Firmware”: the current firmware version 10 - “Password”: password to access device’s web interface after provisioning Appendix 3: Network configuration for auto.wildixin.com provisioningFeatures: Automatically add and provision Wildix devices during new installations Automatically add and provision Wildix devices that had been reset Network configuration: If internal DHCP server is used, it must return PBX address as Primary DNS Server address If external DNS server is used, you must add the correct DNS record (auto.wildixin.com must be resolved to the PBX IP) If external DHCP server is used, you must use PBX address as Primary DNS server For auto-configuration of W-AIR base stations (not SB), you must first manually create a W-AIR network via WMS interface WMS configuration: Two parameters present on the SIP-RTP page in WMS Settings > PBX serve to enable and customize the auto-configuration feature.
Require provisioning password in local networks (default on): when enabled, the system does not provision those devices whose passwords are different from the passwords present on Devices page (default passwords are given to devices during reset procedure) Auto add new devices in local networks (default on): when enabled, devices are added and provisioned automatically in local networks Appendix 4: Auto-configuration of W01GSM with auto.wildixin.comFor auto-configuration of W01GSM follow this procedure: Connect W01GSM to Wildix Switch Go to device’s web interface Enter credentials for the first time access: admin : admin Go to the menu System > System Configuration Enter the following string into the field “Primary Profile URL”: http://auto.wildixin.com:80/?action=setaps&config=xml Click on “Save” Press “Back” on the prompt page Click on “Provision” Go to WMS > Devices: device has been provisioned Directory: wp-content -> uploads -> 2016 2016 -> 2017 afoCo Landmark Scholarship Program 2016 -> Instructions for the Preparation of Camera-Ready Contributions to the Conference Proceedings 2016 -> Step student Scholarships for Year 10-13 2016 -> The united church of canada 2016 -> Idan raichel biography – May 2016 Brief Producer, keyboardist, Lyricist, composer and Performer Idan Raichel 2016 -> An introduction to centre’s interventions expanding access to justice 2016 -> Sanchar Shakti 2016 -> Unit analysis should help here. We want number of bananas 2016 -> The Autobiography of Elder Joseph Bates 2016 -> The Great Heat and the Rhode Island Deep Water Bay Scallop (Argopecten irradians) Fishery 1875-1905 Download 9.64 Mb. Share with your friends:
|