5.1.4Details on Solved Issues Needing Further Explanation 6
5.1.5Known Issues and Limitations
6Transition Warnings 7
6.1.1iOS Transition 7
6.1.2Android Transition 7
Definitions and Abbreviations 7
Copyright - 2016 GENBAND. All rights reserved.
The information in this document is proprietary to GENBAND. Except as specifically authorized in writing by GENBAND, the holder of this document shall keep the information contained herein confidential and shall protect it in whole or in part from disclosure and dissemination to third parties and use it for evaluation, operation, and maintenance purposes only. Changes or modifications to this Release Notes document without the express consent of GENBAND may void the user's warranty and/or authorization to operate the equipment.
Information in this document is subject to change without notice.
GENBAND reserves the right to make changes in design or components as progress in engineering and manufacturing may warrant.
GENBAND, and the GENBAND logo, are trademarks of GENBAND.
All other brands, names, or trademarks mentioned in this document are the property of their respective owners.
3Document Version and Release Date
MobileSDK 4.2.5 GA Release Date: 05.12.2016
Initial document creation
This document provides a simple introduction to the SPiDR MobileSDK 4.2.5 software and known key software limitations. This document contains crucial information and should be read before starting the upgrade to or installation of SPiDR MobileSDK 4.2.5
The following features were introduced in SPiDR MobileSDK 4.2.5 Release:
Mobile SDK Android WebRTC Upgrade:
WebRTC is upgraded to Android webrtc_revision= 57c1ad3b16b222d5e63bf94d96a32c652e2e59d8
4.2Compatible Client Device/OS
Tested on Samsung Galaxy Note 10.1, Nexus 7, Nexus 5 Asus Transformer Prime, Samsung S4, Samsung Note 3, HTC OneX, HTC One, LG G2, LG G3
Tested on iPhone 4S, iPhone 5, iPhone 5C, iPhone 5S, iPhone 6, iPad mini, iPad 4, iPad Air
Jira ID-Title: ADG-13295 moving to airplane mode and back caused call to end - iOS
1. change wifi1 -> wifi2 - OK
2. change wifi2 -> wifi1 - OK
3. move to air plane mode and back (3 sec on airplane mode)
call is ended on iOS
Call must not be ended.
Jira ID-Title: ADG-13215 ip2ip video call gets disconnected automatically at B side
1. A taps on contact B then taps on Video option.
2. B rings & answers. A & B are connected in a video call.
3. A & B are in video call for 10 minutes. Observe "Computed power usage" offsets number again.
4. A & B can tap on the icon next to the "End call" icon to switch to Rear camera, then tap on that icon again to switch back to Front camera.
After 1 minute of video call, it gets disconnected automatically at B side
(B party disconnect the call automatically)
Call must not be disconnected.
Jira ID-Title: ADG-13200 Crash on Video calls (ip-ip, MPV, screen share)