| 486 Motherboard Bios Procedure Rev 1.
1) Connect external keyboard and video monitor to rear panel connections. (if your Seismograph doesn’t have these rear panel peripheral connectors then contact the factory for special instructions:
Geometrics
2190 Fortune Drive
San Jose Ca. 95131 Email: Support@geometrics.com
408 428-4254 Customer Support
1a.) Apply power and select DELETE to enter into the CMOS SETUP UTILITY.
Using the arrow keys select INTEGRATED PERIPHERALS. Press ENTER to enter that menu.
 
3) Verify all settings are disabled. If not, use the
Share with your friends: |
