How Crumple Zones Work by Ed Grabianowski Introduction to How Crumple Zones Work

Download 449.98 Kb.
Size449.98 Kb.
  1   2   3
How Crumple Zones Work

by Ed Grabianowski

Introduction to How Crumple Zones Work

Auto safety has come a long way in the last few decades, and one of the most effective innovations is the crumple zone. Also known as a crush zone, crumple zones are areas of a vehicle that are designed to deform and crumple in a collision. This absorbs some of the energy of the impact, preventing it from being transmitted to the occupants.

Of course, keeping people safe in auto accidents isn't as simple as making the whole vehicle crumple. Engineers have to consider many factors in designing safer cars, including vehicle size and weight, frame stiffness and the stresses the car is likely to be subjected to in a crash. For example, race cars experience far more severe impacts than street cars, and SUVs often crash with more force than small cars.

We're going to find out how crumple zones redistribute the forces involved in a crash, what crumple zones are made out of and learn about a few other advanced safety systems that are being tested right now. We'll also find out how crumple zones have been incorporated into race cars, and why a number of racing fatalities could have been prevented if the sport had adopted these safety features sooner.

To find out the forces involved in a collision, and to learn how a well designed crumple zone can minimize occupant injury, read the next page.

What's In a Crumple Zone?

The specifics of crumple zone designs are usually proprietary information that auto makers are reluctant to divulge. They can vary widely, depending on the size and weight of the vehicle. Designers have to strike a balance between too much impact resistance and too little impact resistance. Simple designs can include frame segments built to bend in certain areas or collapse onto themselves. More advanced designs can utilize a variety of metals and other materials carefully engineered to absorb as much kinetic energy as possible. High-performance cars often use a honeycomb design, which offers stiffness under normal conditions, but can collapse and crumple in a crash.


Force of Impact

Whenever a car is involved in a crash, intense kinetic forces are at work. A given amount of force is present during any crash. The actual numbers vary based on the speed and mass of the car and the speed and mass of whatever it hits. Physicists measure this speed as acceleration -- even when moving from a high speed to a lower speed, any change in speed over time is scientifically referred to as acceleration. To avoid confusion, we will refer to crash acceleration as deceleration.

Crumple zones accomplish two safety goals. They reduce the initial force of the crash, and they redistribute the force before it reaches the vehicle's occupants.

The best way to reduce the initial force in a crash with a given amount of mass and speed is to slow down the deceleration. You've seen this effect for yourself if you've had to slam on your brakes for any reason. The forces you experience in an emergency stop are much greater than when you gradually slow down for a stoplight. In a collision, slowing down the deceleration by even a few tenths of a second can create a drastic reduction in the force involved. Force is a simple equation:

Force = mass * acceleration

Cutting the deceleration in half also cuts the force in half. Therefore, changing the deceleration time from .2 seconds to .8 seconds will result in a 75 percent reduction in total force.

Crumple zones accomplish this by creating a buffer zone around the perimeter of the car. Certain parts of a car are inherently rigid and resistant to deforming, such as the passenger compartment and the engine. If those rigid parts hit something, they will decelerate very quickly, resulting in a lot of force. Surrounding those parts with crumple zones allows the less rigid materials to take the initial impact. The car begins decelerating as soon as the crumple zone starts crumpling, extending the deceleration over a few extra tenths of a second.

Crumple zones also help redistribute the force of impact. All of the force has to go somewhere -- the goal is to send it away from the occupants. Think of the force involved in a crash as a force budget. Everything that happens to the car during an impact and every person inside of the car at the time of the impact spends some of the force. If the car hits a non-stationary object, like a parked car, then some force is transferred to that object. If the car hits something with a glancing blow and spins or rolls, much of the force is spent on the spinning and rolling. If parts of the car fly off, even more force is spent. Most importantly, damage to the car itself spends force. Bending parts of the frame, smashing body panels, shattering glass -- all of these actions require energy. Think of how much force is needed to bend the steel frame of a car. That amount of force is spent on bending the frame, so it is never transmitted to the occupants.

Crumple zones are based on that concept. Parts of the car are built with special structures inside them that are designed to be damaged, crumpled, crushed and broken. We'll explain the structures themselves shortly, but the fundamental idea is that it takes force to damage them. Crumple zones spend as much force as possible so that other parts of the car as well as the occupants don't suffer the effects.

So why not make the entire car one giant crumple zone? And if you need space for a crumple zone to absorb impact, how do you build a compact car with crumple zones? We'll explain in the next section.

Download 449.98 Kb.

Share with your friends:
  1   2   3

The database is protected by copyright © 2022
send message

    Main page