In this lab, you will learn how to configure the following tasks: Multi Area ospf
Download 19.57 Kb.
|
- Navigate this page:
- On ISP router
- On ASBR router
- Then, we will configure OSPF
- On ABR1 router
- On R1 router
| Cisco Network Academy
CCNA 3 Scaling Networks Packet Tracer Practice with Dans’ Sample http://www.danscourses.com/ In this lab, you will learn how to configure the following tasks: Multi Area OSPF Note: 2 layer hierarchy: Backbone area and non-backbone area All of the non-backbone area need to be connected to the backbone area network No more than 50 routers are in one area Border router is in no more than three area ASBR: Autonomous system boundary router On ISP router Router>en Router#conf t Router(config)#hostname ISP ISP(config)#int g0/0 ISP(config-if)#ip address 209.165.200.17 255.255.255.240 ISP(config-if)#no shut ISP(config-if)#ip route 0.0.0.0 0.0.0.0 g0/0 %Default route without gateway, if not a point-to-point interface, may impact performance ISP(config)#exit ISP#copy run start ISP#
On ASBR router Router>en Router#conf t Router(config)#hostname ASBR
ASBR(config-if)#ip address 209.165.200.18 255.255.255.240 ASBR(config-if)#no shut
ASBR(config-if)#ip address 10.1.1.2 255.255.255.252 ASBR(config-if)#no shut
ASBR(config-if)#ip address 10.2.2.2 255.255.255.252 ASBR(config-if)#clock rate 128000 ASBR(config-if)#no shut ASBR(config-if)#ip route 0.0.0.0 0.0.0.0 g0/0 ASBR(config)# Then, we will configure OSPF ASBR(config)#router ospf 1 ASBR(config-router)#router-id 7.7.7.7 ASBR(config-router)#network 10.1.1.0 0.0.0.3 area 0 ASBR(config-router)#network 10.2.2.0 0.0.0.3 area 0 ASBR(config-router)#default-information originate ASBR(config-router)#exit ASBR(config)#exit ASBR#copy run start ASBR#
On ABR1 router Router>en Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#hostname ABR1 ABR1(config)#int s0/0/0 ABR1(config-if)#ip address 10.1.1.1 255.255.255.252 ABR1(config-if)#clock rate 128000 ABR1(config-if)#no shut
ABR1(config-if)#ip address 192.168.1.1 255.255.255.0 ABR1(config-if)#no shut
ABR1(config-if)# ABR1(config-if)#router ospf 1 ABR1(config-router)#router-id 5.5.5.5 ABR1(config-router)#network 10.1.1.1 0.0.0.0 area 0 ABR1(config-router)#network 192.168.1.0 0.0.0.255 area 1 ABR1(config-router)#
Router>en Router#conf t
R1(config)#int g0/1 R1(config-if)#ip address 192.168.1.2 255.255.255.0 R1(config-if)#no shut R1(config-if)#int g0/0 R1(config-if)#ip address 192.168.2.1 255.255.255.0 R1(config-if)#no shut R1(config)#int lo0 R1(config-if)#ip address 192.168.3.1 255.255.255.0 R1(config-if)# R1(config-if)#router ospf 1 R1(config-router)#router-id 1.1.1.1 R1(config-router)#network 192.168.1.0 0.0.0.255 area 1 R1(config-router)#network 192.168.2.0 0.0.0.255 area 1 R1(config-router)#network 192.168.3.0 0.0.0.255 area 1 R1(config-router)# On ASBR ASBR>en
ASBR#show ip route Directory: ~hlee3 -> classes -> itec452 fall2017 itec452 fall2017 -> Digital Trolleys (Instructor Version) Instructor Note itec452 fall2017 -> Dr and bdr elections (Instructor Version) Instructor Note Download 19.57 Kb. Share with your friends:
|