Intent of specifications
Download 263.9 Kb.
|
- Navigate this page:
- EXPERIENCE AND SERVICE
- QUALITY AND WORKMANSHIP
- DELIVERY
- MANUALS AND PERMAMNENT REFERENCE
- SAFETY VIDEO
|
Appendix A NAT13087-HAZMATUNIT Hazardous Materials Response Unit
INTENT OF SPECIFICATIONSThe specifications listed herein are intended to identify the furnishing and delivery of a complete Hazardous Materials Response Unit and are not meant to be restrictive. Specifications are intended to define the level of quality, workmanship, finish, and function required; and to communicate desired characteristics. All offerors may propose equipment exactly as specified or equivalent. Where equivalent products are proposed, detail sufficient to establish equivalency must be provided. The State shall hold final determination as to whether the offeror has substantiated the equality of the workmanship, finish, function, and approximate characteristics to those identified in the specifications. The specifications cover the requirements as to the type and construction to which the apparatus shall conform, together with certain details as to finish, equipment, and appliances with which the successful offeror shall conform. Minor details of construction and materials, which are not otherwise specified, are left to the discretion of the offeror. RESPONDING TO SPECIFICATIONS Each proposal shall include a copy of Appendix A marked as follows by the offeror: In the columns next to each specification found in Appendix A, the offeror must communicate ability to meet the specification as written, or with equivalent, by checking either YES or NO. Any NO responses must be explained using Attachment 3 of this RFP. NOTE: Proposers are not to change existing content in Appendix A. Any alterations to the existing content will not be considered and could result in a proposer’s complete submission being determined non-responsive Each proposal shall be accompanied by a detailed set of specifications consisting of a detailed description of the apparatus and equipment proposed and to which the apparatus furnished under contract shall conform. These specifications shall indicate size, type model and make of all component parts and equipment. Specifications within a proposal shall appear in the same order as the listing of specifications in this Appendix A. Failure to meet this requirement could result in the proposal being considered non-responsive. The awarded offeror shall propose the providing of loose equipment only when identified in the specifications as being loose or specifically requested by the State. Any other proposed delivery of loose equipment must be substantiated with the current edition of NFPA 1901 standards. EXPERIENCE AND SERVICEProposals shall only be considered from companies that have an established reputation in the field of emergency apparatus construction and that have successfully completed contractual requirements for delivery and service of emergency apparatus for a continuing and uninterrupted period of time. Further, offerors shall maintain dedicated service facilities for the repair and service of products. Evidence of such a regional facility shall be included in an offeror’s proposal. A facility within the State of Delaware will receive favorable consideration. If not located within the State of Delaware, the facility shall preferably be located within a six (6) hour round trip from Dover, DE. Each offeror shall furnish satisfactory evidence of their ability to construct the apparatus specified and shall state the location of the factory where the apparatus is to be built. The bidder shall also show that the company is in position to render prompt service and to furnish replacement parts. QUALITY AND WORKMANSHIPThe design of the apparatus shall embody the latest approved automotive engineering practices. The workmanship shall be of the highest quality in its respective field. Special consideration shall be given to the following points: Accessibility of the various units which require periodic maintenance; ease of operation (including both pumping and driving); and symmetrical proportions. Construction shall be rugged and ample safety factors shall be provided to carry the loads specified and to meet both on and off road requirements and speed conditions as set forth under Performance Tests and Requirements. Welding shall not be employed in the assembly of the apparatus in a manner that shall prevent the ready removal of any component part for service or repair. All steel welding shall follow American Welding Society D1.1-2004 recommendations for structural steel welding. All aluminum welding shall follow American Welding Society and ANSI D1.2-2003 requirements for structural welding of aluminum. All sheet metal welding shall follow American Welding Society B2.1-2000 requirements for structural welding of sheet metal. Flux core arc welding to use alloy rods, type 7000, American Welding Society standards A5.20-E70T1. The manufacturer is responsible for inspection of weld quality. DELIVERYApparatus, to ensure proper break in of all components while still under warranty, shall be delivered under its own power - rail or truck freight shall not be acceptable. A qualified delivery engineer representing the contractor shall deliver the apparatus and remain for a sufficient length of time to instruct personnel in the proper operation, care and maintenance of the equipment delivered. MANUALS AND PERMAMNENT REFERENCEThe manufacturer shall supply at time of delivery, complete operation and maintenance manuals covering the completed apparatus as delivered. A permanent plate shall be mounted in the driver's compartment which specifies the quantity and type of fluids required including engine oil, engine coolant, transmission and drive axle. SAFETY VIDEODocumentation provided at the time of delivery shall also include an apparatus safety video, in DVD format. This video shall address key safety considerations for personnel to follow when they are driving, operating, and maintaining the apparatus. Safety procedures for the following shall be included: vehicle pre-trip inspection, chassis operation, and maintenance. Directory: NAT NAT -> This is a working version not a completed document nato order of battle NAT -> Supplementary Methods NAT -> The New York Times Magazine, August 26, 2007 In Nature’s Casino NAT -> Hurricanes are getting fiercer NAT -> - NAT -> April 9, 2008 Hurricanes (Continued) NAT -> Homework 8: Hurricane Damage and Hurricane Forecasts NAT -> Hurricane Katrina NAT -> The United States National Report Download 263.9 Kb. Share with your friends:
|