List of Publications Department of Mechanical Engineering ucek, jntu kakinada

1. 
   M.V Rao Pavuluri, Subba Rao V.V, Degradation model based on Tsai-Hill factors to model the progressive failure of fibre metal laminates, Journal of composite Materials, 2010
   

2. 
   M.V Rao Pavuluri, Subba Rao V.V, Estimating the failure strength of fibre metal laminates by using a hybrid degradation model, Journal of Reinforced Plastics and Composites, 2010, 29(20) pp 3058-3063.
   

3. 
   K.L. Harikrishna, J.J.S. Dilip, K. Ramaswamy Choudary, V.V. Subba Rao, S.R. Koteswara Rao, G.D. Janaki Ram, N. Sridhar and G. Madhusudhan Reddy,” Friction stir welding of magnesium alloy ZM21”, Transactions of The Indian Institute of Metals, Vol. 63, Issue 5, October 2010, pp. 807 – 811.
   

4. 
   G.Venkateswara Rao, G.Konda Reddy and V.V.S. Rao, “On choice of admissible functions in Rayleigh –Ritz method to predict large amplitude vibration characteristics of beams” National Journal of Engineering Today, Vol XII, Issue 12, December 2010, pp 157-166.
   

5. 
   K.Mallikarjuna rao et al. ‘Determination of Stress Concentration factors of a Steam Turbine Rotor using FEA,Institute of Engineers, Journal of Mechanical Engineering, Bangladesh, Vol 40, No 2 2010
   

6. 
   A Gopala Krishna et al. ‘A study on material properties of low carbon alloy steel by flow forming, Journal of Manufacturing Engineering, 2010.
   

1. 
   M.V Rao Pavuluri, Subba Rao V.V, Rajagopalachary T, First ply failure analysis of fibre metal laminated plates subjected to uniformly distributed load, International journal of advanced engineering & Application, June 2010, pp. 206-210.
   

2. 
   M.V Rao Pavuluri, Subba Rao V.V, Rajagopalachary T, Estimation of in-plane off-axis strength of fibre metal laminates consisting of Magnesium layers and GFRP Laminas, International journal of Advanced engineering & Application , 2010, Vol 5, issue 12, 2119-2126,.
   

3. 
   G.Venkateswara Rao, G.Konda Reddy and V.V. Subba Rao “Simplified Continuum Analogue of Finite Element Formulation for Thermal Postbuckling of Columns”, International Journal of Mechanical Engineering , Vol. 3, Issue 2, July-December 2010, pp. 285 – 289.
   

4. 
   V Ramachandra Raju et al. ‘an experimental investigation on surface quality and dimensional accuracy of FDM components’, International Journal of Emerging Technologies 1 (2), 106-111
   

5. 
   V Ramachandra Raju et al. ‘Selection of supply chain through fuzzy outranking technique’, International Journal of Information, intelligence & knowledge, PP 52-56, 2010
   

6. 
   V Ramachandra Raju et al. ‘Fuzzy generic approach to economic lot size scheduling problem’, Jordan Journal of Mechanical & Industrial Engg., PP 9-16,2010
   

7. 
   V Ramachandra Raju et al. ‘Optimization of constrained multi-item fuzzy inventory problems using G.A’ International Journal Of Mechanical engineering , PP 29-35, 2010
   

8. 
   K.Mallikarjuna rao et al. ‘Crack identification of a beam by vibration measurement and wavelet analysis’ International journal of Engineering Science and technology,Vol.2,2010
   

9. 
   G Ranga Janardhana et al. “A methodology for the feature recognition of rotary parts from neutral files”, International Journal of Applied Management and Technology, Vol.9, No.1, December 2010.
   

10. 
    G Ranga Janardhana et al. “The Influence of Process Parameters on Surface Roughness in Dry Machining of Hardened Steel En31 with CBN Cutting Tool – by ANN”, International Journal of Applied Engineering Research, Vol.5, No.12, 2010, pp.2059-2068.
    

11. 
    G Ranga Janardhana et al. ‘ “Experimental investigations on turning of Inconel 718”, International Journal On Mechanical & Automobile Engineering, ISSN 0974-231X, IJMAE, Vol. 11, Issue No. 01, September 2010- November 2010, Winter Edition 2010, pp.18-25.
    

12. 
    G Ranga Janardhana et al. “Evolution of Artificial Neural Network (ANN) model for predicting secondary dendrite arm spacing in aluminium alloy casting”, Journal of the Brazilian Society of Mechanical Science & Engineering, Vol. 32, No. 3, July-September 2010, pp.276-281.
    

13. 
    G Ranga Janardhana et al. “Temperature dependent thermal conductivity enhancement of copper oxide nano-particles dispersed in propylene glycol-water base fluid” International Journal of Nanoparticles (IJNP), Inderscience, Vol 3 No.2, 2010, pp 149-159.
    

14. 
    G Ranga Janardhana et al. “Effect of Input Parametes on the mechanical Properties of A413 Alloy Coactive Neuro-Fuzzy Interface System Approach”, Journal of Manufacturing Engineering, December 2010, Vol.5, Issu 4, pp.237-24
    

15. 
    G Ranga Janardhana et al. “Determination of Weld Loads and Throat Requirements using finite Element Models – A Comparison with Classical Analysis”, Manufacturing Technology Today Journal, CMTI Publication, Vol.9, Issue 3, March 2010, pp.3-12.
    

16. 
    G Ranga Janardhana et al. “Influence of Process Parameters on Surface Residual Stress in Dry Machining of Hardened Steel [EN31] with Cermet Cutting Tool – ANN Approach”, Journal of Manufacturing Engineering, June 2010, Vol.6, No.2, pp.143-146
    

17. 
    A Gopala Krishna et al. ‘Assessment of alcohol in a four stroke D.I. diesel engine using surface ignition technique’, Technology World, March 2010
    

18. 
    A Gopala Krishna et al. ‘Experimental investigation and development of empirical correlations of machining parameters for cylindrical grinding process, International journal of emerging technologies and applications in engineering, technology and sciences, volume 3, issue 2, July-Dec 2010
    

19. 
    K Meerasaheb et al. ‘Evaluation Of Large Amplitude Free Vibration Behavior Of Uniform Timoshenko Beams Using Coupled Displacement Field Method, Advances in Vibration Engineering Vol.9 No.1,2010, pp.15-23
    

20. 
    D Lingaraju et al. “Shape optimization of cantilever beam with using ANT colony optimization technique”, International journal on Mechanical & Automobile Engineering, Volume-7, Issue-1, Pages:9-16, 2010
    

21. 
    D Lingaraju et al. “Indegenous material for prosthetic Limbs side clamp analysis”, Indian Journal of Material Science, Volume-6, Issue-1, pp:1-7
    

1. G Ranga Janardhana et al. “Dynamic Stability of Beams on Elastic Foundation”, Journal of Structural Engineering, Vol.38, No.2, June – July 2011, pp.151-160.

2.G.Konda Reddy, G.Venkateswara Rao and V.V.S. Rao, “General continuum solutions for large amplitude free vibration and post buckling of beams” National Journal of Structural Engineering, Vol 37, No.6, February – March 2011, pp 441-444.
3.A Swarna Kumari et al. ‘Experimental investigations of diesel engine using neem oil, Journal of Engineering Research and Studies – Vol.II/Issue IV, Dec 2011, pp 44

4.A Gopala Krishna et al. ‘Study on material properties of AISI (1010) by flow forming, Journal of Manufacturing Engineering, March 2011, Vol. 6, Issue 1, pp 10-13.

1.V Ramachandra Raju et al. ‘Structural Electrical and Optical Properties of In2Te3 Thin Films’, International Journal Of Applied Engineering Research 6 (6)

2.V Ramachandra Raju et al. ‘Theoretical & Experimental investigation of gain scheduling and adaptive autopilots for a model boat’, International Journalof Engineering Science and Technology , PP 902-911,2011

3.V Ramachandra Raju et al. ‘Adaptive steering of boat using model reference approach’, International Journal of Applied Engineering Research, PP 1223-1233,2011

4.K.Mallikarjuna rao et al. ‘Prediction of stress Concentration effect under Thermal and dynamic loads on a High Pressure Turbine Rotor’, International Journal of Mechanical Engineering Research, Academic Journals,Canada,2011.

5.K.Mallikarjuna rao et al. ”Assessment of Stress concentration effect under Thermal and Dynamic loads on a IP Steam turbine Rotor”. Interantional Journal of mechanical and automobile Engineering,Vol.10 Issue no.01,Fall edition, SERC, USA,2011.

6.K.Mallikarjuna rao et al. ‘”Influence of stress concentration on a LP Turbine under thermal and dynamic loads “International journal of advanced Engineering Applications,Steps Initiative,Italy,2011

7.K.Mallikarjuna rao et al. ‘A comparison in prediction of CO2 welding process parameters using multiple regression analysis and artificial neural networks” published in th e International Journal of mechanical & Automobile engineering ,Vol.14,pp49-55,Mar2011-May,2011.

8.K.Mallikarjuna rao et al. ‘”prediction of weld bead geometry for CO2 welding process bu multiple regresson analysis” International Journal of Mathematics and scientific computing, Vol.1 No.1-2011.

9.K.Mallikarjuna rao et al. ‘”application of continous wavelet transform in crack detection on structural members in Interantional journal of applied Engineering research,Vol.6 pp1713-1720,2011.

10.G Ranga Janardhana et al. “Development of Supply Chain Tools in Improving the Efficiency of Manufacturing Unit – A Case of India Cements Limited”, International Journal of Engineering Science & Technology, ISSN 0975-5462, Vol.3, No.12, December 2011, pp.8479-8490.

11.G Ranga Janardhana et al. “Simultaneous Scheduling of Machines and AGVS in Flexible Manufacturing System by Heuristic Algorithm”, International Journal of Advanced Engineering Sciences and Technologies, ISSN 2230-7818, Vol.12, No. 2, 2011, pp.91-105.

12.G Ranga Janardhana et al. “Optimization of cutting conditions for surface roughness in CNC end milling”, International Journal of Precision Engineering and Manufacturing, Springer, Vol. 12, No. 3, June 2011, pp.383-391.
13.G Ranga Janardhana et al. “Master Formula for Evaluating Vibration Frequencies fo Sturcutral Members under Compressive Loads”, The IES Journal Part A: Civil and Structural Engineering, Vol.4, No.2, May 2011, pp.79-88.

14.G Ranga Janardhana et al. “Evaluate the Influence of Tool clearance, friction, sheet thickness, punch/die size and punching layout on the deformation”, International Journal ion Mechanical & Automobile Engineering, ISSN 0974-231, March – May 2011, Vol.15, No.01, pp.22-30.

15.G Ranga Janardhana et al. “GA Based Inventory Control for Manufacturing Unit”, American Journal of Scientific Research, ISSN 1450-223X, Issue 17 (2011), pp.91-104.

16.G Ranga Janardhana et al. “Processing-structure-property relationships in electron beam physical vapor deposited yttria stabilized zirconia coatings”, Journal of Vacuum Science Technology A: Vacuum, Surfaces and Films, Vol. 29, No. 3, American Vacuum Society (published 10 March 2011) May/Jun 2011, pp.031501-8.

17.G Ranga Janardhana et al. “Simultaneous scheduling of machines and vehicles in an FMS environment with alternative routing”, Int. J. Advanced Manufacturing Technology, Springer, Vol.53, No.1, 2011, pp.339-351.

18.G Ranga Janardhana et al. “Multi Response Optimization of High Speed Turing Parameters of Super alloy Inconel 718 Material using Taguchi method based Grey Relational Analysis”, i-manager’s Journal on Mechanical Engineering, May-July 2011, Vol.1., No.3, pp.49-60

19.G Ranga Janardhana et al. “Multi Response Optimization of Inconel 718 High Speed Turning using Taguchi method based Grey Relational Analysis”, Manufacturing Technology Today Journal, CMTI Publication, ISSN 0972-7396, Vol. 10, Issue No. 6, June 2011, pp.11-19.

20.G Ranga Janardhana et al. “Development of Three Simple Master Dynamic Stability Formulas for Structural Members subjected to Periodic Load”, Journal of Institution of Engineers (India), Vol.92, May 2011, pp.9-14.

21.A Swarna Kumari et al. ‘Experimental investigations of IC engine with pongamia diesel blends, International Journal of Advanced Engineering Technology – Vol. II/Issue IV, Dec 2011, pp 54

22.A Swarna Kumari et al. published on International Journal on Mechanical & automobile Engineering (IJMAE) “Effect of injector opening pressure on performance characteristics of diesel engine with safflower oil” Acceptance code: SERC

23.B Balakrishna et al. ‘Performance Evolution of Di Diesel Engine using Neat Pre – heated Mahua Methyl Ester, IE(I) Journal – ID, Vo.92.(May-2011), pp. 12-16

24.B Balakrishna et al.’ Study of acetylene Gas as a Fuel in Gasoline Engine using Computational Fluid Dynamics’, International Journal of Fluid Dynamics and Aerospace Engineering, Vol.1, No.1 (Nov.2011), pp.65-78.

25.B Balakrishna et al. ‘Applications of Casting Simulation for Sand Casting of a Crusher Plate’. International Journal of Thermal Technologies, Vol.1, No.1 (Dec.2011), pp.107-113.

26.A Gopala Krishna et al. ‘An integrated evolutionary approach for modeling and optimization of wire electrical discharge machining, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture April 2011vol. 225 no. 4 549-567

27.A Gopala Krishna et al. ‘Determination and optimization of cylindrical grinding parameters using Taguchi method and regression analysis, International journal of engineering science and technology, July 2011.

28.A Gopala Krishna et al. ‘Empirical modeling of bead geometry and optimization in Laser beam welding, International journal of engineering research and industrial applications, Vol.4 No.III, 427-544, August 2011.

29.A Gopala Krishna et al. ‘Multi-objective optimization of a machining process, International journal of engineering research and industrial applications, Vol.3 No.IV, 227-242,Oct 2011.

30.A Gopala Krishna et al. ‘An integrated evolutionary approach for modeling and optimization of wire electrical discharge machining”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2011 225: 549, DOI:10.1243/09544054JEM1975, in press. SAGE Publishers.

31.A Gopala Krishna et al. ‘An integrated evolutionary approach for modeling and optimization of wire electrical discharge machining”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2011 225: 549, DOI: 10.1243/09544054JEM1975, in press. SAGE Publishers.

32.D Lingaraju et al. “Computer aided analysis of mild steel and FRP composite foundations”, International Journal of Computer Aided Engineering and Technology (IJCAET)-Inderscience Publications, Vol. 3, No. 2, 2011, Pp:175-203

33.D Lingaraju et al. “Experimental Investigation of Mechanical and Tribological behavioral studies of polymer Hybrid nanocomposites with nano reinforcements”, Bulletin of material science, springer, Vol. 34, No. 4, 2011, pp. 705–712

34.D Lingaraju et al. “study on effect of time and feed size on grinding characteristics of raw coal”, International Journal on Mechanical & Automobile Engineering (IJMAE) , Volume 13, Issue No 01, 2011, PP [06-13],

35.V Vara Prasad et al. ‘Tensile and Flexural Properties of Glass fiber-reinforced Polyster hybrid composites. International Journal of Materials and Biomaterials Applications 2011; 1 (1): 14-16.

36.V Vara Prasad et al. ‘Chemical resistance and tensile properties of bamboo and glass fibers Reinforced epoxy hybrid composites, International Journal of Materials and Biomaterials Applications 2011; 1 (1): 17-20.

37.V Vara Prasad et al. ‘Centrifugal compressor fluid flow analysis using CFD, Science Insights: An International Journal 2011.

38.V Vara Prasad et al. ‘Modeling, analysis and optimization of the total fuel consumption and brake thermal efficiency of diesel engine with pongamia oil as an alternate fuel,Science Insights: An International Journal 2011.

39.D Lingaraju et al. “Characterization and prediction of some engineering properties of polymer - Clay/Silica hybrid nanocomposites through ANN and regression models”, Engineering Fracture Mechanics-an International Journal, Elsevier Publications, Vol 10, 2011, PP:9–18
2012-13

National Conferences

-Nil-

National Journals

1.V Ramachandra Raju et al. ‘Choosing actuation scheme for optimal performance of 3-DoF planar parallel manipulators ‘, Advances in Mechanical Engineering 4, 171682

2.K.Venkateswarlu, B.S.R Murthy, and V.V Subbarao., An Experimental Investigation on Performance,Combustion and Emission Characteristics of Diesel-Biodiesel Blends with Isobutanol as an Additive. SAE Technical Paper number: 2012-28-0011, DOI: 10.4271/2012-28-0011.
International Conferences

1.V Jaya Prasad presented paper on 2-Day International Conference "Engineering materials and processes" during23^th-24^th May,2013 at Tagore Engg College, Chennai

1.K.Mallikarjuna rao et al. ‘Modeling and analysis of the Air-cooled Ammonia-Water Triple Effect Cycle’, International Journal of Earth Science and Engineering ,2012 p.p. 947-954

2.G Ranga Janardhana et al. “Integration of Strategic Tactical and Operational Level Planning of Scheduling in FMS by Meta heuristic Algorithm”, International Journal of Advanced Engineering Research and Studies, E-ISSN 2249-8974, Vol.I, Issue II, January-March 2012, pp.10-20

3. Ranga Janardhana et al. “Prediction of Optimal Cutting Parameters for High Speed Dry Turning of Incolnel 718 using GONNS”, International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976-6359, Vol. 3, Issue 3, September – December 2012, pp.294-305.

4.G Ranga Janardhana et al. “Numerical Simulation ad /experimental Validation of Electrode Life in Plasma Cutting Torch for Different Injection Angles”, International Journal of Intelligent Information Processing (IJIIP),Vol.3, No.2, June 2012, pp.77-85.

5.G Ranga Janardhana et al. “Comparison of Modelling Techniques for selecting Optimized and Automated Plasma Cutting Process Parameters”, International Journal of Modeling, Simulation and Scientific Computing, World Scientific, Vol.3, No.3, 2012, pp.1250011-1 to 1250011-15.

6.G Ranga Janardhana et al. “Development of Surface Roughness Prediction model for titanium alloy in Milling”, Manufacturing Technology Today, CMTI Journal, ISSN-0972-7396, Vol.11, No.2, August 2012, pp.5-13

7.S. Madhu, V. V. Subba Rao, P. Pramod Kumar, and K. Chandramouli, "Static and Dynamic Anaslyis of Carbon Nanotube Reinforced Polymer Composite Plates," Materials Science Research Journal, Volume 6, Number 3-4, ISSN: 1935-2441, Nova Science Publishers, Inc., 2012.

10.B Balakrishna et al. ‘Theoretical and Experimental Prediction of the performance of Vegetable Oil Operated CI Engine’. International Journal of Engineering Research & Industrial Applications. Vol.5 No.1 (Feb.2012), pp.435-454.

11.B Balakrishna et al. ‘Fracture Toughness Prediction of Brittle & Ductile Materials’ International Journal of Engineering Research & Technology, Vol.1.No.5 (Jul 2012). pp.1-10

12.B Balakrishna et al. ‘Flow Analysis of Atmospheric Re-entry Vehicle’, International Journal of Research & Development, Vol.3.No.4 (Aug 2012). pp.52-57

13.B Balakrishna et al. ‘CFD computation of Educator Diffuser Systems with Multi Lobed Nozzle’. International Journal of Engineering Inventions, Vol.1, No.1 (Nov.2012), pp.1-8.

14.B Balakrishna et al. ‘Vegetable Oil as Fuel in C.I. Engine: Problems and Possible Solutions’. International Journal of Engineering science & Technology, No.11,(Nov.2012), pp.4687-4690

15.B Balakrishna et al. ‘Effect of Modified AA5356 on collusion behavior of AA6061 alloy GTA welds’, International Journal of Modern Engineering Research, Vol.2, No.1(Dec.2012), pp.4429-4433

16.A Gopala Krishna et al. ‘An integrated evolutionary approach for modeling and optimization of CNC end milling process, International Journal of Computer Integrated Manufacturing, Taylor & Francis Publishers, Volume 25, Issue 11, 2012

19.V Jaya Prasad, S Kamaluddin et al. ‘Performance Evaluation of Neem Methyl Esters as Biodiesel on CI Engines’, International Journal of Engineering Research and Applications, Vol. 2, Issue 4, July-August 2012, pp.1673-1679

20.D Lingaraju et al. “Failure analysis of pin loaded glass epoxy/polystyrene composite plates”, International Journal of Advanced Research in Engineering and Technology (IJARET), Volume 3, Issue 2, July-December (2012), pp. 137-144

21.V Vara Prasad et al. ‘Optimization of multi-objectve facility layout using non-traditional optimization technique, International Journal of Engineering Science and Technology (IJEST) ISSN : 0975-5462 Vol. 4 No.02 February 2012.

1.DileepKumarK,V.VSubbaRaoCarbonNanotubes“Discovery,Characteristics,Synthesis and Applications” Proceedings of Proceedings of NCRAME-2014 at UCEV, Mar22nd , 2014

2.Dileep Kumar K, V.V Subba Rao “Vibration Damping in Fiber Reinforced Composite Materials” Proceedings of NCRAME-2014 at UCEV, Mar22nd , 2014

3.Dileep Kumar K, V.V Subba Rao “Mechanical Characterization of SWCNT” Proceedings of Proceedings of NFME-2014 at UCEK, Jul 18th -19th , 2014

1.G Ranga Janardhana et al. “Improving the Efficiency of Supply Chain by Considering Inventories and Routing cost as Factors using Genetic Algorithm”, Industrial Engineering Journal, IIIE Publications, Vol.VI, Issue No.2, February 2013, pp.13-18

2.A Swarna Kumari et al. ‘Performance evaluation of diesel engine with safflower oil’- Journal of Engineering Studies and Research – Vol.19, No.2, Nov 2013, pp 63-69.

3.A Gopala Krishna et al. ‘Simultaneous optimization of multiple performance characteristics in WEDM for machining ZC63/SiCp MMC, Advances in Manufacturing, September 2013, Volume 1, Issue 3, pp 265-275

1.Dr. K.Meera Saheb, Associate Professor Attended International conference on "Vibration engineering and technology of machinery" at Nanjing, China to present his research paper titled "evaluation of large amplitude free vibration behaviour of moderately thick square plates using coupled displacement field method".during 20th -23rd Aug,2013 at Nanjing, China.

2.Dr. V.V.Subba Rao Professor Attended 2-Day International conference organised by World academy of Science, Engineering & Technology present his research paper titled "Mechanical, Mechatronics & Materials Engineering". During 10th-11th Mar,2013 at Miami, USA

3.Dr. D.Lingaraju Assistant Professor Attended 2-Day International conference on "Material processing & Characterization" to submit his research paper titled "Low cost Friction Stir Welding of Aluminium Nano composite". On 8th-9th Mar,2014 at RGIET, Hyderabad.

1.V Ramachandra Raju et al. ‘Design for optimal performance of 3-RPS parallel manipulator using evolutionary algorithms’, Transactions of the Canadian Society for Mechanical Engineering 37 (2), 135

2.G Ranga Janardhana et al. “Development of Empirical Model for Prediction of Surface Roughness using Regression & ANN method”, International Journal of Advanced in Engineering and Technology, ISSN 2231-1963, Vol.6, Issue 5, November 2013, pp.2041-2052.

3.G Ranga Janardhana et al. “Optimization of Machining Process using ANOVA and S/N Method”, International Journal of Engineering Associates, ISSN 2320-0804, Vol.2, Issue 5, September 2013, pp.60-66.

4.G Ranga Janardhana et al. “Development of Empirical Model for Prediction of Surface Roughness in Turning Operation”, International Journal of Innovative Technology & Creative Engineering, ISSN 2045-8711, Vol.3, Issue 7, July 2013, pp.103-108.

5.G Ranga Janardhana et al. “Modeling and Optimization of Cutting Parameters in High Speed Dry Machining of Inconel 718 Alloy”, International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976-6499 Vol. 4, Issue 4, May-June 2013, pp.242-252.

6.G Ranga Janardhana et al. “Development of Supple Chain Tools Using Genetic Algorithm and Comparison with Particle Swarm Optimization ad Simulated Annealing Optimization Algorithms”, The IUP Journal of Supply Chain Management, ICFAI Publications, Vol. X, No.2, June 2013, pp.33-43.

7.S. Madhu, V. V. Subba Rao and P. Pramod Kumar, "Buckling Analysis of Carbon Nanotube Reinforced Polymer Composite Plates, " International Journal of Research in Mechanical Engineering and Technology, vol 3-2, pp 51-54, ISSN: 2249-5770, May-Oct, 2013.

8.K.Venkateswarlu, B.S.R Murthy, V.V Subba Rao., The Effect of Exhaust Gas Recirculation and Di-Tertiary Butyl Peroxide on Diesel-Biodiesel Blends for Performance and Emission Studies, International Journal of Advanced Science and Technology,Vol 54,pp49-60,2013.
9.A Swarna Kumari et al. ‘Performance characteristics for the use of blended safflower oil in diesel engine’ – International Journal of Advanced Research in Engineering Technology – Vol.4 Issue 3, Apr 2013, pp 26-32.

10.B Balakrishna et al. ‘Investigation of Supersonic Flow through Conical Nozzle with Various Angles of Divergence’. International Journal of Mechanical Engineering (IJME), Vol.2.No.1 (Feb.2013), pp.9-1

11.B Balakrishna et al. ‘Effect of Angle of Flap on Lift and Drag in a Flapping Wing Flight’. International Journal of Mechanical Engineering (IJME), Vol.2.No.1(Feb.2013), pp.29-36

12.B Balakrishna et al. ‘Characteristics Optimization of Different Welding Processes on Duplex Stainless Steels Using Statistical Approach and Taguchi Technique’-A Review Gide. International Journal of Engineering Inventions, Vol2. Issue 3,(Feb 2013),pp.29-36

13.B Balakrishna et al. ‘Stability Characteristics of missile due to manoeuvring in all six Degree of freedom using CFD simulations’, International Journal of Innovative Research in Science,

Engineering and Technology, Vol. 2, Issue 9, (Sep-2013), pp. 4449-4457

14.B Balakrishna et al. ‘Computational Three-Dimensional Analysis of Transport Phenomena in a PEM fuel cell’, International Journal of Engineering Research & Technology (IJERT), Vol.2, Issue 10, (Oct-2013)

15.B Balakrishna et al. ‘Analysis of Dual Bell Rocket Nozzle Using Computational Fluid Dynamics’. International Journal of Research in Engineering and Technology, Vol.2, Issue.11, (Nov-2013), pp. 421-417

16.A Gopala Krishna et al. ‘Statistical Modeling and Analysis of Dry Sliding Wear of SiC Reinforced Aluminum MMCs. International Journal of Surface Engineering and Interdisciplinary Materials Science (IJSEIMS), 1(1), 57-70. doi:10.4018/ijseims.2013

17.A Gopala Krishna et al. ‘Modeling and Optimization of Cutting Qualities of Laser Beam Machining, Int. J. of Mechanical Computational and Manufacturing Research, Vol.2. No.2, (2013) 39 – 53, ISSN: 2301-4148.

17.A Gopala Krishna et al. ‘Multi-objective Optimization of Laser beam cutting process”, International Journal of Research in Mechanical Engineering and Technology, IJRMET Vol. 3, Issue 2, May - Oct 2013, International Journal of Research in Mechanical Engineering & Technology 279.

18.A Gopala Krishna et al. ‘Compliance modeling and intelligent optimization of kerf during WEDM of Al7075/SiCP metal matrix composite, Journal of Manufacturing Engineering, Vol. 8, Issue. 2, pp 127-138.

19.A Gopala Krishna et al. ‘A Generic Framework for Modeling and Optimization of White Layer Thickness in WEDM during Machining Al7075/SiCP Metal Matrix Composites, International Journal of Mechanical Computational and Manufacturing Research, Vol. 2, No.1, pp 13–27, ISSN: 2301-4148.

20.K Meerasaheb et al. ‘Evaluation Of Large Amplitude Free Vibration Behavior of Moderately Thick Square Plates Using Coupled Displacement Field Method”, Vol.34 No.12, December 2013

21.V Jaya Prasad, S Kamaluddin ,N Mohanrao,KVR Sankar., ‘A Review on Composite materials and current Applications’, International Journal of Luminescence and its Applications,2013

22.V Jaya Prasad, S Kamaluddin ,N Mohanrao., ‘Evolution of Mechanical Properties of Al Cu alloys by Angular Extrusion’, International Journal of Engineering Research and Applications, 2013.

23.V Jaya Prasad, S Kamaluddin ,N Mohanrao.,’Effect of Copper and T6 heat treatment on the microstructure and mechanical properties on gravity cast A356 aluminum alloy’, International Journal of Engineering Research and Technologies, 2013

24.V Vara Prasad et al. ‘Experimental analysis to enhance the effectiveness of heat exchanger using triangular fins, International Journal of Mechanical and Production Engineering Research and Development, ISSN 2249-6890 ,Vol. 3, Issue 2, Jun 2013, 1-10

25.V Vara Prasad et al. ‘Study on mechanical behaviour of carbon fiber reinforced epoxy composites, International Journal of Mechanical and Production Engineering Research and Development, ISSN(P): 2249-6890; ISSN(E): 2249-8001,Vol. 3, Issue 5, Dec 2013, 73-78.
2014-15

National Conferences

1. 
   Dileep Kumar K, V.V Subba Rao; “Evaluation of Damping Characteristics in the Hybrid Composite Plates” Proceedings of ISME2015 Conference on Advances in Mechanical Engineering at IIT-Delhi, Oct 3-4, 2015
   
2. 
   Dileep Kumar K, V.V Subba Rao, V Vara Prasad and M Abhinav; “Sensorised Deflection of Hybrid Composite Plate by Variable PZT Patches” Proceedings of ISME2015 Conference on Advances in Mechanical Engineering at IIT-Delhi, Oct 3-4, 2015
   
3. 
   Dileep Kumar K, V.V Subba Rao, and T. Pavan Kishore; Young’s Modulus of SWCNT Through Modeling and Simulation Proceedings of ISME2015 Conference on Advances in Mechanical Engineering at IIT-Delhi, Oct 3-4, 2015
   

1. A Gopala Krishna et al. ‘Review on residual stresses in welded joints prepared under the influence of mechanical vibrations, Journal of Manufacturing Technology Research 6.1/2 (2014): 33-40.

2.A Gopala Krishna et al. ‘Principal Component Analysis of Correlated WEDM Performance Characteristics during Machining ZC63/SiCP MMCs, Journal for Manufacturing Science and Production. Volume 14, Issue 1, Pages 13–21, January 2014
International Conferences

1. B.Balakrishna Professor Attended International conference on "Advances in Mechanical Sciences" to present his research papers entitled i). Design optimization of catalytic converter to reduce particulate matter and achieve united back pressure in diesel engine by CFD.

ii). Computational fluid dynamics analysis of advanced rocket nozzle.iii).Validation of unsteady thermo dynamic CFD simulations of aircraft wing anti-king operations, during 9th-11^th Jan 2014,Dept. of Mechanical Engineering, Vardhaman College of Engineering, Hyderabad
2. V.Jaya Prasad Assistant Professor Attended 28th National convention of Metallurgical & Materials Engineers paper titled "Enhancement of micro structural and Mechanical properties through ECAP of aluminium alloy". During 23rd -24th Jan, 2015 at UCEV , JNTUK Vizianagaram.

3. Dr. K.Meera Saheb Associate Professor Attended "Advances in mechanical sciences"

1.Large amplitude free vibrations of mindlin square plates using coupled displacement field method.

4..Effect of poisson's ratio of large amplitude free vibrations of uniform shera flexible beams and Fuzzy inference system modeling to predict performance of H3B03(Nm) and Tio2(um) as lubricants in machining on 9th-11th Jan, 2014 at Hyderabad

5. K. Krishna Bhaskar Assistant Professor Attended International conference on "Advances in Design & Manufacturing" Presented research paper titled,1.Large amplitude free vibrations of wind line plates using coupled displacement field method

6.Effect of poisson's ratio on large amplitude free vibrations of Timoshenko beams using coupled displacement field method 5th -7th Dec, 2014 NIT, Trichy.

7. K.Meerasaheb Associate Professor Paper presentation "Buckling Analysis of Moderately thick rectangular plates using coupled displacement Field Method" in International conference on "Vibration problems-2015". 18th – 21st Feb,2015 Kakatiya Unviersity, Warangal.

8.K.KrishnaBhaskar Assistant Professor Paper presentation "Large amplitude free vibrations of Timoshenko beams at Higher modes using coupled displacement Field method" in International conference on "Vibration problems-2015". 18th – 21st Feb,2015 Kakatiya Unviersity, Warangal.

9.V.Jaya Prasad Assistant Professor Paper presentation To attend to a conference titled "Advances in Materials, Manufacturing and applications, presented paper titled "Enhancement of micro structural and mechanical properties through ECAP of A1 Alloys".9th -11th Apr, 2015 NIT, Trichy.

10.K.Dileep Kumar Assistant Professor Paper presentation Conference on "Advances in Materials, Manufacturing and applications “ presented his papers titled 1.Evaluation of Damping charac-teristics in composite plates, 2. Analysis of laminated structures with integrated PZT-Actuators". 9th -11th Apr, 2015 NIT, Trichy.

11.V Ramachandra Raju,K Sitaramaraju et al. ‘Launching Particle to constant reinforcement ratio as a parameter for improving the nano reinforcement distribution and tensile strength of aluminium nano metal matrix composites: Paper presented at “International Conference on Advances in Design & Manufacturing “(ICAD&M14) , 5-7 December 2014, National Institute of Technology, Tiruchirapalli, TamilNadu, India

12.V.Vara Prasad Assistant Professor Paper Presentation 17th ISME Conference on Advances in Mechanical Engineering "Evaluation of Mechanical Properties of Banana Fibre reinforced Polyester composite" 3th -4th Oct, 2015 IIT, Delhi.

13.K.Dileep Kumar Assistant Professor Paper presentation International conference on "Vibration Problems-2015" to present his research paper titled “Evaluation of Damping characteristics in the Hybrid composite plates by Ritz method". 14th -17th Dec, 2015 IIT, Guwahathi.

14.Dileep Kumar K, V.V Subba Rao; “Evaluation of Damping Characteristics in Composite Plates” Proceedings of International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015) at NIT-Trichy, April 9-11, 2015, Pp. 1077

15.Dileep Kumar K, V.V Subba Rao; “Analysis of Laminated Structures with Integrated PZT Actuator” Proceedings of International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015) at NIT-Trichy, April 9-11, 2015, Pp. 906

16.Vara Prasad V, Dileep Kumar K and M Abinav Kumar; “Static and Dynamic Analysis of Structures with Embedded Piezoelectric Actuators” Proceedings of International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015) at NIT-Trichy, April 9-11, 2015

17.Dileep Kumar K, V.V Subba Rao; A Full Length Paper on “Damping Evaluation of Hybrid Composite Plates Using Ritz Method” is Accepted to be Presented in International Conference on Vibration Problems (ICOVP2015) at IIT-Guwahati During 14-17th Dec, 2015

18.Dileep Kumar K, V.V Subba Rao, G. Venkateswara Rao and P. Praveen; A Full Length Paper on “Youngs Modulus Of Chiral Carbon Nanotubes Through Modeling And Simulation” is Accepted to be Presented in NANOS2015 at GITAM University, Visakhapatnam, Andhra Pradesh, During14th to 17th Dec, 2015

19.Dileep Kumar K, V.V Subba Rao; A Full Length Paper on “Passive Constrained Layer Damping of Polymer Composite Plates” is Accepted to be Presented in ICTiME2015 at Cochin University of Science and Technology, Kerala During 16th to 17th Dec, 2015

20.Dileep Kumar K, V.V Subba Rao and M Abhinav; A Full Length Paper on “Static and Dynamic Analysis of Glass/Kevlar Hybrid Polymer Composite Plate” is Accepted to be Presented in ICAME’15 at TKM College of Engineering, Kerala During 14th to 16th Dec, 2015

1.G. Srinivasa Rao, V.V. Subba Rao, T. Srinivasa Rao ,P. Kumara Swamy, R. karthikeyan, S.R. Koteswara Rao., “Corrosion behavior of AFNOR 7020-T6 aluminum alloy friction stir welds under salt fog environment”, International Journal of Applied Environmental Sciences ISSN 0973-6077 Volume 9, Number 3 (2014), pp. 837-846.

4.G Ranga Janardhana et al. “Mathematical Modeling for the Prediction of Depth of Penetration in Double Pulse GMA Welding using Fractional Factorial Method”, Applied Mechanics and Materials, Trans Tech Publications, Switzerland, Vol.660, 2014, pp.347-351.

5.G Ranga Janardhana et al. “The effect of rescheduling on operating performance of the supply chain under disruption – A literature review”, Applied Mechanics and Materials, Trans Tech Publications, Switzerland, Vols. 592-594, 2014, pp.2704-2710

6.A Gopala Krishna et al. ‘Mechanical properties improvement of weldments using vibratory welding system, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture May, 2014.

7.A Gopala Krishna et al. ‘Multi-response optimization of tribological characteristics of aluminum MMCs using PCA, Multidiscipline Modeling in Materials and Structures 2014 10:2 , 276-287
8.A Gopala Krishna et al. ‘Selection of optimal process parameters in WEDM while machining Al7075/SiCp metal matrix composites, The International Journal of Advanced Manufacturing Technology, July 2014, Volume 73, Issue 1, pp 299-314
9.A Gopala Krishna et al. ‘Performance analysis of Electric Discharge Machining of RENE 80 Nickel Super Alloy using various statistical tools, International Journal of Machining and Machinability of Materials, 2014 Vol. 15 No. ¾

10.A Gopala Krishna et al. ‘Multi-Objective Optimization of EDM Process Parameters using Taguchi Method, Principal Component Analysis and Grey Relational Analysis. International Journal of Manufacturing, Materials, and Mechanical Engineering,2014, 4(2), 29-46.

11.A Gopala Krishna et al. ‘Impact strength improvement of butt welded joints prepared by vibratory welding process, Journal of Manufacturing Technology Research 6.3/4 (2014): 143-151.

12.A Gopala Krishna et al. ‘A Study on White Layer Thickness and Surface Crack Density in Rotary EDM of RENE80 Nickel Superalloy, Applied Mechanics and Materials, Vols. 592-594, pp. 23-27, Jul. 2014.

13.A. Gopala Krishna, Principal Component Analysis of Correlated WEDM Performance Characteristics during Machining ZC63/SiCp MMCs, Journal of Manufacturing Science and Production, Volume 14, Issue 1, 2014.

14. K Meerasaheb et al. ‘Large amplitude free vibrations of Mindlin square plates using coupled displacement field method, International Journal of Current Engineering and Technology, Special issue2, Feb2014,pp.683-686

15. G. Srinivasa Rao, V.V.Subba Rao, S.R.Koteswara Rao., “Mechanical and corrosion properties of Al-Cu alloy 2219-T87 friction stir welded joints”, Materials Testing, September 2015, Vol. 57, No 9. Pages: 733–743
16.G.Srinivasa Rao , V.V.Subba Rao, S.R.Koteswara Rao., “Microstructure and mechanical properties of AA7020-T6 aluminium alloy friction stir welds”, Metal Science and Heat treatment (Springer), Jan 2015- In Press
17.G.Srinivasa Rao , V.V.Subba Rao, S.R.Koteswara Rao., “Microstructure and salt fog corrosion behavior of AA2219 friction stir welded aluminium alloy”, Metal Science and Heat treatment (Springer), Jan 2015- In Press
18.K.Venkateswarlu, B.S.R Murthy, V.V Subba Rao. An experimental investigation to study the effect of fuel additives and exhaust gas recirculation on combustion and emissions of diesel-biodiesel blends. The Journal of Brazilian Society of Mechanical Sciences and Engineering J Braz. Soc. Mech. Sci. Eng., DOI 10.1007/s40430-015-0376-7. Published online 23 June,2015.
19.K.Venkateswarlu, B.S.R Murthy, V.V Subba Rao., “Performance and Emission Improvement of Biodiesel Fueled Diesel Engine with Exhaust Gas Recirculation and Ethyl Hexyl Nitrate Additive,” International Journal of Bio-Science and Bio-Technology,Vol.7(2), (2015), pp.87-106.

20.V Ramachandra Raju, K Sitaramaraju et al. ‘Effect of Reinforcement of Nano AL2O3 on Mechanical Properties of AL2024 NMMCs’ , Materials Today: Proceedings 2 (4), 3712-3717

21.V Ramachandra Raju,K Sitaramaraju et al. ‘Investigation of novel parameters affecting distribution of reinforcement in nano metal matrix composites’, International Journal of Nano manufacturing 11 (1-2), 94-109

22.V Ramachandra Raju,K Sitaramaraju et al. ‘Effect of fibre shape on transverse thermal conductivity of unidirectional composites’, sadhana, 1-11,2015

23.A Swarna Kumari et al. ‘Performance and Emission characteristics of Mahua Biodiesel in a Di – Diesel Engine’ – International Journal of Mechanical Engineering and Technology (IJMET) Vol.6, Issue 11, Nov 2015, pp. 123 – 131.

24.A Swarna Kumari et al. ‘Properties of vegetable oils and their influence on Performance and Exhaust Emissions of a Di- Diesel Engine – A Review’ – International Journal of Mechanical Engineering and Technology (IJMET) Vol.6, Issue 11, Nov 2015, pp. 89-101.

25.A Swarna Kumari et al. ‘Performance and Emission Studies of a SI engine using Distilled Plastic Paralysis Oil-Petrol blends- ‘International Journal of Mechanical Engineering and Robotics Research (IJMERR)

26.A Gopala Krishna et al. ‘Empirical modeling and optimization of kerf and wire wear ratio in wire electrical discharge machining, International Journal of Advanced Manufacturing Technology, March 2015, Volume 77, Issue 1, pp 427-441

29.A Gopala Krishna et al. ‘A. G. Evaluation of Bending Strength of the Vibratory Welded Joint Using Regression Technique. International Society of Offshore and Polar Engineers, 2015, September, Volume 25, Issue 03.

30.A Gopala Krishna et al. ‘Flexural Strength Improvement of Welded Joints Prepared by Vibratory Welding Process. International Journal of Manufacturing, Materials, and Mechanical Engineering, 5(4), 1-16.
31.K Meerasaheb et al. ‘Large Amplitude Free Vibrations of Mindlin Plates using Coupled Displacement Field Method, International Journal of Applied Engineering research, 2015,pp.21120-21126

32.K Krishnabaskar et al, ‘Large Amplitude Free Vibrations of Mindlin Plates Using Coupled Displacement Field Method, International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10 No.24 (2015)

33.B L Manasa et al."Design Mathematical Modeling and Analysis of Underwater Glider" International Journal of Science and Research (IJSR)Volume 4 Issue 7, July 2015


List of Publications

Department of CSE

UCEK,JNTU Kakinada

Year wise publications:

Year of publication	2010-11	2011-12	2012-13	2013-14	2014-15
National journals	1	-	-	-	-
National conferences	4	-	05	01	4
International journals	10	37	38	33	34
international conferences	3	4	13	7	11
Total	18	41	56	41	49

2010-2011

International Journal

1.JVR Murthy, “Hierarchical Document Clustering with Effective Preprocessing Using ASCII Based Stop word elimination and stemming”, International Journal of THE TECHNOLOGY WORLD, January 2010.

2.JVR Murthy, Suresh Chandra Satapathy, Suresh Chittineni, P.V.G.D. Prasad Reddy, “Kalman Particle Swarm Optimized Polynomials for Data Classification, Applied Mathematical Modelling”, Applied Mathematical Modelling published by Elsevier Sciences, Volume 36, Issue 1, pages 115 – 126, May 2011.

3.K.V.Ramana, Neural Network Based Classification and Diagnosis of Brain Hemorrhages, International Journal of Artificial Intelligence and Expert System (IJAE), Volume (1), Issue (2), July 2010, pages 7-25, July 2010

4.Ch.Satyanarayana, Bio-chemical Studies of Thyroid Disorders in Coastal Andhra Pradesh”,, Asian Journal of Microbiol. Biotech. Env. Sc. Vol. 12, No (2), 2010.,

5.Ch.Satyanarayana ,A Comprehensive Analysis of Spoofing”, International Journal of Advanced Computer Science and Applications”,, Vol.1, No.6, 2010.

6.K.Sahadevaiah,An Empirical Examination of Routing Protocols in Mobile Ad Hoc Networks, International Journal of Communications, Network and System Sciences (IJCNS), ISSN 1913-3715, Vol. 3, No.6, pp. 511-522, June, 2010.

7.O.SrinivasaRao, “Efficient mapping methods of Elliptic Curve Crypto Systems”, International Journal of Engineering Science and Technology, Vol. 2(8), 2010, pp. 3651-3656, 2010