Odroid-a kernel compile

• 
  참고싸이트: http://dev.odroid.com/projects/odroida
  
• 
  컴파일소스: Exynos4210_Android_4.0.4_BSP.tar 내의 kernel.tar.gz 사용
  
• 
  커널 설정 수정
  

• 
  Device Drivers -> USB support -> USB Gadget Support -> USB Gadget Drivers를 선택하여 Ethernet Gadget (with CDC Ethernet support)로 변경
  

• 
  커널 컴파일
  

$ make ARCH=arm odroid_a_defconfig

$ make ARCH=arm CROSS_COMPILE=arm-none-eabi-

• 
  컴파일된 커널 이미지를 타겟으로
  

$ sudo minicom –s

• 
  Power on  key 입력
  

$ lsusb

$ sudo ~/android-sdks/platform-tools/fastboot flash kernel arch/arm/boot/zImage

• 
  내 시스템에서 fastboot는 위와 같은 위치에 존재
  

• 
  내 시스템에서 ramdisk-uboot.img가 존재하지 않아서 생략
  

• 
  결과: 타겟이 재부팅 후에 계속 아래와 같은 로그만 나오면서(약 1시간을 기다려도) 화면이 아무것도 안 나옴. 혹시 몰라서 로그를 아래에 붙입니다. 맨 아래 붉은 글씨 부분이 1시간 동안 계속 반복됩니다.
  

OK
U-Boot 2010.03-svn ( 5占?25 2011 - 15:01:00) for HKDKC210 Android

PMIC: ARM 1.30V, INT 1.15V, G3D 1.10V

POP type: POP_B

DRAM: 1 GB

OneNAND: 0 kB

MMC: 7647 MB

*** Warning - using default environment

Out: serial

Err: serial

Checking Boot Mode ... SDMMC

board_late_init

Hit any key to stop autoboot: 0

reading kernel.. 1120, 8192

MMC read: dev # 0, block # 1120, count 8192 ...8192 blocks read: OK

completed

reading RFS.. 9312, 2048

MMC read: dev # 0, block # 9312, count 2048 ...2048 blocks read: OK

completed

Boot with zImage

## Loading init Ramdisk from Legacy Image at 41000000 ...

Image Name: ramdisk

Image Type: ARM Linux RAMDisk Image (uncompressed)

Data Size: 306447 Bytes = 299.3 kB

Load Address: 41000000

Entry Point: 41000000
Starting kernel ...
Uncompressing Linux... done, booting the kernel.

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 3.0.15 (juna@juna-Ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #12

[ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d

[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache

[ 0.000000] Machine: ODROIDA

[ 0.000000] Memory policy: ECC disabled, Data cache writealloc

[ 0.000000] CPU EXYNOS4210 (id 0x43210211)

[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics

[ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set

[ 0.000000] audiocdclk: no parent clock specified

[ 0.000000] s3c_register_clksrc: clock armclk has no registers set

[ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000

[ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000

[ 0.000000] ACLK160=160000000, ACLK133=133333333, ACLK100=100000000

[ 0.000000] uclk1: source is mout_mpll (6), rate is 100000000

[ 0.000000] uclk1: source is mout_mpll (6), rate is 100000000

[ 0.000000] uclk1: source is mout_mpll (6), rate is 100000000

[ 0.000000] uclk1: source is mout_mpll (6), rate is 100000000

[ 0.000000] sclk_csis: source is xusbxti (1), rate is 24000000

[ 0.000000] sclk_csis: source is xusbxti (1), rate is 24000000

[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 24000000

[ 0.000000] sclk_cam1: source is xusbxti (1), rate is 24000000

[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000

[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000

[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000

[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 24000000

[ 0.000000] sclk_fimd: source is xusbxti (1), rate is 24000000

[ 0.000000] sclk_fimd: source is xusbxti (1), rate is 24000000

[ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 200000000

[ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 41666666

[ 0.000000] sclk_pwi: source is xusbxti (1), rate is 12000000

[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1854000 s7232 r8192 d13248 u32768

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096

[ 0.000000] Kernel command line: console=ttySAC1,115200n8 androidboot.console=ttySAC1

[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Memory: 1024MB = 1024MB total

[ 0.000000] Memory: 771836k/771836k available, 276740k reserved, 294912K highmem

[ 0.000000] Virtual kernel memory layout:

[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

[ 0.000000] DMA : 0xfea00000 - 0xffe00000 ( 20 MB)

[ 0.000000] vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xee000000 ( 736 MB)

[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

[ 0.000000] .init : 0xc0008000 - 0xc003e000 ( 216 kB)

[ 0.000000] .text : 0xc003e000 - 0xc071f000 (7044 kB)

[ 0.000000] .data : 0xc0720000 - 0xc07a91f0 ( 549 kB)

[ 0.000000] .bss : 0xc07a9214 - 0xc090e6b8 (1430 kB)

[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[ 0.000000] Preemptible hierarchical RCU implementation.

[ 0.000000] NR_IRQS:456

[ 0.000000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)

[ 0.045000] pid_max: default: 32768 minimum: 301

[ 0.045000] Mount-cache hash table entries: 512

[ 0.045000] Initializing cgroup subsys debug

[ 0.045000] Initializing cgroup subsys cpuacct

[ 0.045000] Initializing cgroup subsys freezer

[ 0.045000] CPU: Testing write buffer coherency: ok

[ 0.045000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available

[ 0.045000] L310 cache controller enabled

[ 0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B

[ 0.075000] CPU1: Booted secondary processor

[ 0.075000] Brought up 2 CPUs

[ 0.075000] SMP: Total of 2 processors activated (3984.58 BogoMIPS).

[ 0.080000] print_constraints: dummy:

[ 0.080000] NET: Registered protocol family 16

[ 0.090000] failed to get resource VDD_LDO15

[ 0.090000] failed to get resource VDD_LDO15

[ 0.095000] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

[ 0.095000] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.

[ 0.100000] hw-breakpoint: maximum watchpoint size is 4 bytes.

[ 0.100000] exynos4_pmu_init: PMU supports 4210(72)

[ 0.100000] S3C Power Management, Copyright 2004 Simtec Electronics

[ 0.100000] EXYNOS4: Initializing architecture

[ 0.100000] s3c-adc s5pv210-adc: attached adc driver

[ 0.100000] samsung-pd samsung-pd.0: power domain registered

[ 0.100000] samsung-pd samsung-pd.1: power domain registered

[ 0.100000] samsung-pd samsung-pd.2: power domain registered

[ 0.100000] samsung-pd samsung-pd.3: power domain registered

[ 0.100000] samsung-pd samsung-pd.5: power domain registered

[ 0.100000] samsung-pd samsung-pd.4: power domain registered

[ 0.100000] samsung-pd samsung-pd.6: power domain registered

[ 0.100000] s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0

[ 0.100000] UMP: UMP device driver loaded

[ 0.100000] s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.

[ 0.100000] s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.

[ 0.100000] s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.

[ 0.100000] s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.

[ 0.100000] s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.

[ 0.100000] s5p-sysmmu s5p-sysmmu.9: Initialized for s5p-fimg2d.

[ 0.100000] s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.

[ 0.100000] s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.

[ 0.100000] s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.

[ 0.115000] bio: create slab at 0

[ 0.115000] SCSI subsystem initialized

[ 0.115000] usbcore: registered new interface driver usbfs

[ 0.115000] usbcore: registered new interface driver hub

[ 0.115000] usbcore: registered new device driver usb

[ 0.120000] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)

[ 0.120000] i2c-gpio i2c-gpio.1: using pins 44 (SDA) and 45 (SCL)

[ 0.120000] i2c-gpio i2c-gpio.4: using pins 18 (SDA) and 19 (SCL)

[ 0.120000] max8997 0-0066: No interrupt specified.

[ 0.130000] print_constraints: VDD_ADC_3.3V: 3300 mV

[ 0.135000] print_constraints: VALIVE_1.1V: 1100 mV

[ 0.135000] print_constraints: VUSB_D_1.1V: 1100 mV

[ 0.135000] print_constraints: V_MIPI_1.8V: 1800 mV

[ 0.135000] print_constraints: VDD_MIF_1.8V: 1800 mV

[ 0.135000] print_constraints: VDD_CAM_1.8V: 1800 mV

[ 0.135000] print_constraints: VDD_GPS_1.8V: 1800 mV

[ 0.135000] print_constraints: VUSB_A_3.3V: 3300 mV

[ 0.140000] print_constraints: VDD_LCD_2.8V: 3000 mV

[ 0.140000] print_constraints: VDD_PLL_1.1V: 1100 mV

[ 0.140000] print_constraints: VDD_LDO13: 2800 mV

[ 0.140000] print_constraints: VDD_LDO14: 1800 mV

[ 0.140000] print_constraints: VDD_LDO15: 2800 mV

[ 0.140000] print_constraints: VDD_LDO21: 1500 mV

[ 0.140000] print_constraints: vdd_arm range: 775 <--> 1400 mV at 1250 mV

[ 0.145000] print_constraints: vdd_int range: 750 <--> 1375 mV at 1100 mV

[ 0.145000] print_constraints: vdd_g3d range: 900 <--> 1200 mV at 1100 mV

[ 0.145000] print_constraints: VDD_MEM: 1200 mV

[ 0.145000] print_constraints: VDD_IO_1.8V: 1800 <--> 1950 mV at 2000 mV

[ 0.145000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter

[ 0.145000] Advanced Linux Sound Architecture Driver Version 1.0.24.

[ 0.145000] Bluetooth: Core ver 2.16

[ 0.145000] NET: Registered protocol family 31

[ 0.145000] Bluetooth: HCI device and connection manager initialized

[ 0.145000] Bluetooth: HCI socket layer initialized

[ 0.145000] Bluetooth: L2CAP socket layer initialized

[ 0.145000] Bluetooth: SCO socket layer initialized

[ 0.145000] Switching to clocksource mct-frc

[ 0.145629] Switched to NOHz mode on CPU #0

[ 0.145738] Switched to NOHz mode on CPU #1

[ 0.153944] NET: Registered protocol family 2

[ 0.154118] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.154751] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.156293] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

[ 0.157139] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.157149] TCP reno registered

[ 0.157159] UDP hash table entries: 512 (order: 2, 16384 bytes)

[ 0.157189] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[ 0.157469] NET: Registered protocol family 1

[ 0.157626] Trying to unpack rootfs image as initramfs...

[ 0.175372] Freeing initrd memory: 296K

[ 0.175474] PMU: registered new PMU device of type 0

[ 0.176373] --------------------------------------------------------

[ 0.176383] odroid_sysfs_init(397) : Sleep Disable Flag SET!!(Wake_lock_init)

[ 0.176390] --------------------------------------------------------

[ 0.176466] Registered chained gpio int handler for interrupt 110.

[ 0.176490] Registered interrupt support for gpio group 17.

[ 0.176498] Register Irq Gpio : wifi oob irq gpio = 93, irq num = 388

[ 0.176949] input: wakeup_assist as /devices/platform/wakeup_assist.0/input/input0

[ 0.177558] Loaded driver for PL330 DMAC-0 s3c-pl330

[ 0.177567] DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32

[ 0.177929] Loaded driver for PL330 DMAC-1 s3c-pl330

[ 0.177939] DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32

[ 0.178035] Loaded driver for PL330 DMAC-2 s3c-pl330

[ 0.178044] DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32

[ 0.185984] highmem bounce pool size: 64 pages

[ 0.186224] ashmem: initialized

[ 0.195794] NTFS driver 2.1.30 [Flags: R/W].

[ 0.196180] fuse init (API version 7.16)

[ 0.196780] msgmni has been set to 932

[ 0.197761] io scheduler noop registered

[ 0.197770] io scheduler deadline registered

[ 0.197828] io scheduler cfq registered (default)

[ 0.198608] registerd lp101wh1 LCD Driver.

[ 0.199146] s3cfb s3cfb.0: [fb2] dma: 0x6b2f4000, cpu: 0xee859000, size: 0x007f8000

[ 0.268167] s3cfb s3cfb.0: registered successfully

[ 0.268487] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[ 0.340265] s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10

[ 0.355069] s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10

[ 1.317741] console [ttySAC1] enabled

[ 1.335060] s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10

[ 1.350059] s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10

[ 1.371908] brd: module loaded

[ 1.375293] loop: module loaded

[ 1.375376] i2c i2c-2: mpu3050: +bma150

[ 1.376605] i2c i2c-2: WARNING: Accel irq not assigned

[ 1.381743] i2c i2c-2: mpu3050: +ams0303

[ 1.385646] i2c i2c-2: WARNING: Compass irq not assigned

[ 1.390939] i2c i2c-2: mpu3050: No Pressure Present

[ 1.396300] mldl_cfg:Reset MPU3050

[ 1.435205] i2c i2c-2: Installing irq using 219

[ 1.435256] i2c i2c-2: Module Param interface = mpuirq

[ 1.439697] input: mpu-accel as /devices/virtual/input/input1

[ 1.445123] i2c-core: driver [mpu3050] using legacy suspend method

[ 1.451119] i2c-core: driver [mpu3050] using legacy resume method

[ 1.457759] PPP generic driver version 2.4.2

[ 1.461698] PPP Deflate Compression module registered

[ 1.466487] PPP BSD Compression module registered

[ 1.471568] PPP MPPE Compression module registered

[ 1.475945] NET: Registered protocol family 24

[ 1.480541] usbcore: registered new interface driver asix

[ 1.485870] usbcore: registered new interface driver cdc_ether

[ 1.491676] usbcore: registered new interface driver net1080

[ 1.497324] usbcore: registered new interface driver cdc_subset

[ 1.503225] usbcore: registered new interface driver zaurus

[ 1.508679] cdc_ncm: 01-June-2011-mbm-1

[ 1.512605] usbcore: registered new interface driver cdc_ncm

[ 1.518140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.524888] s5p-ehci s5p-ehci: S5P EHCI Host Controller

[ 1.529925] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1

[ 1.536983] s5p-ehci s5p-ehci: irq 134, io mem 0x12580000

[ 1.550032] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00

[ 1.550603] hub 1-0:1.0: USB hub found

[ 1.553519] hub 1-0:1.0: 3 ports detected

[ 1.557941] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 1.563759] s5p-ohci s5p-ohci: Already power on PHY

[ 1.568560] s5p-ohci s5p-ohci: s5p OHCI

[ 1.572384] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2

[ 1.579411] s5p-ohci s5p-ohci: irq 134, io mem 0x12590000

[ 1.639527] hub 2-0:1.0: USB hub found

[ 1.639578] hub 2-0:1.0: 3 ports detected

[ 1.642220] usbcore: registered new interface driver cdc_acm

[ 1.647282] cdc_acm: v0.26-mbm_2:USB Abstract Control Model driver for USB modems and ISDN adapters

[ 1.656471] usbcore: registered new interface driver cdc_wdm

[ 1.661949] Initializing USB Mass Storage driver...

[ 1.666976] usbcore: registered new interface driver usb-storage

[ 1.672799] USB Mass Storage support registered.

[ 1.677681] usbcore: registered new interface driver usbserial

[ 1.683217] usbserial: USB Serial Driver core

[ 1.687670] USB Serial support registered for cp210x

[ 1.692665] usbcore: registered new interface driver cp210x

[ 1.698060] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver

[ 1.704941] USB Serial support registered for FTDI USB Serial Device

[ 1.711356] usbcore: registered new interface driver ftdi_sio

[ 1.716940] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver

[ 1.722943] s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics

[ 1.722949] s3c-udc : version 15 March 2009

[ 1.736779] android_usb gadget: Mass Storage Function, version: 2009/09/11

[ 1.741500] android_usb gadget: Number of LUNs=1

[ 1.746061] lun0: LUN: removable file: (no medium)

[ 1.751222] android_usb gadget: android_usb ready

[ 1.755666] Registered gadget driver 'android_usb'

[ 1.761925] odroid_keypad_init

[ 1.763810] input: odroid-keypad as /devices/virtual/input/input2

[ 1.769666] --------------------------------------------------------

[ 1.775839] odroid-keypad driver initialized!! Ver 1.0

[ 1.780949] --------------------------------------------------------

[ 1.787289] platform_driver_register 0

[ 1.865049] usb 1-1: new high speed USB device number 2 using s5p-ehci

[ 1.995952] hub 1-1:1.0: USB hub found

[ 1.996155] hub 1-1:1.0: 3 ports detected

[ 2.280162] usb 1-1.3: new high speed USB device number 3 using s5p-ehci

[ 2.323792] input: odroida-ts as /devices/platform/i2c-gpio.4/i2c-4/4-0050/input/input3

[ 2.335218] --------------------------------------------------------

[ 2.335924] TOUCH SCREEN INFORMATION

[ 2.340454] --------------------------------------------------------

[ 2.346790] TOUCH INPUT Name = odroida-ts

[ 2.350782] TOUCH IRQ Mode = IRQ_MODE_NORMAL

[ 2.355209] TOUCH F/W Version = 2.09

[ 2.358752] TOUCH FINGRES MAX = 2

[ 2.362066] TOUCH ABS X MAX = 1366, TOUCH ABS X MIN = 0

[ 2.367339] TOUCH ABS Y MAX = 768, TOUCH ABS Y MIN = 0

[ 2.372415] Mulit-Touch Protocol-A Used.

[ 2.376314] GPIO early-init function implemented

[ 2.380916] H/W Reset function implemented

[ 2.384971] Early-suspend function implemented

[ 2.389408] Calibration function implemented

[ 2.393691] --------------------------------------------------------

[ 2.400147] i2c-core: driver [odroid-ts] using legacy suspend method

[ 2.406366] i2c-core: driver [odroid-ts] using legacy resume method

[ 2.412940] ish1000_setup: 1466

[ 2.453239] cdc_acm 1-1.3:1.1: ttyACM0: USB ACM device

[ 2.460864] cdc_acm 1-1.3:1.3: ttyACM1: USB ACM device

[ 2.471831] cdc_wdm 1-1.3:1.5: cdc-wdm0: USB WDM device

[ 2.491036] usb 1-1.3: MAC-Address: 0x02:0x80:0x37:0xec:0x02:0x00

[ 2.491483] usb 1-1.3: wakeup: enabled

[ 2.496080] cdc_ncm 1-1.3:1.6: rmnet0: register 'cdc_ncm' at usb-s5p-ehci-1.3, CDC NCM, 02:80:37:ec:02:00

[ 2.505969] cdc_wdm 1-1.3:1.8: cdc-wdm1: USB WDM device

[ 2.511875] cdc_acm 1-1.3:1.9: ttyACM2: USB ACM device

[ 2.666206] S3C24XX RTC, (c) 2004,2006 Simtec Electronics

[ 2.666327] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

[ 2.671862] using rtc device, s3c, for alarms

[ 2.675641] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0

[ 2.682020] i2c /dev entries driver

[ 2.686081] Linux video capture interface: v2.00

[ 2.690415] Initialize JPEG driver

[ 2.693710] i2c i2c-1: attached s5p_ddc into i2c adapter successfully

[ 2.699854] i2c-core: driver [s5p_ddc] using legacy suspend method

[ 2.705902] i2c-core: driver [s5p_ddc] using legacy resume method

[ 2.712016] S5P HPD Driver, (c) 2009 Samsung Electronics

[ 2.717691] S5P CEC Driver, (c) 2009 Samsung Electronics

[ 2.723399] MFC(Multi Function Codec - FIMV v5.x) registered successfully

[ 2.729731] Samsung Graphics 2D driver, (c) 2011 Samsung Electronics

[ 2.736200] Mali: init_mali_clock mali_clock c073a350

[ 2.743368] Mali: Mali device driver loaded

[ 2.745262] max17040 1-0036: power supply max17040-battery registerd.

[ 2.752231] max17040 1-0036: MAX17040 Fuel-Gauge Ver 0002

[ 2.756973] i2c-core: driver [max17040] using legacy suspend method

[ 2.763129] i2c-core: driver [max17040] using legacy resume method

[ 2.769306] max8903-charger max8903-charger: Can't control Current-Limit-Mode. DCM Always High!

[ 2.778144] max8903-charger max8903-charger: power supply max8903-ac registerd.

[ 2.785474] max8903-charger max8903-charger: power supply max8903-usb registerd.

[ 2.793075] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics

[ 2.798745] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled

[ 2.806916] device-mapper: uevent: version 1.0.3

[ 2.811107] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com

[ 2.819235] Bluetooth: Virtual HCI driver ver 1.3

[ 2.824021] Bluetooth: HCI UART driver ver 2.2

[ 2.828292] Bluetooth: HCI H4 protocol initialized

[ 2.833075] Bluetooth: HCI BCSP protocol initialized

[ 2.838009] Bluetooth: HCILL protocol initialized

[ 2.842697] Bluetooth: HCIATH3K protocol initialized

[ 2.848090] cpuidle: using governor ladder

[ 2.852381] cpuidle: using governor menu

[ 2.855750] sdhci: Secure Digital Host Controller Interface driver

[ 2.861814] sdhci: Copyright(c) Pierre Ossman

[ 2.866210] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (100000000 Hz)

[ 2.873031] mmc0: no vmmc regulator found

[ 2.877179] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA

[ 2.884069] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (100000000 Hz)

[ 2.891035] mmc1: no vmmc regulator found

[ 2.895183] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA

[ 2.901943] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (100000000 Hz)

[ 2.908780] mmc2: no vmmc regulator found

[ 2.912921] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA

[ 2.921547] usbcore: registered new interface driver usbhid

[ 2.925344] usbhid: USB HID core driver

[ 2.929546] logger: created 256K log 'log_main'

[ 2.933826] logger: created 256K log 'log_events'

[ 2.938497] logger: created 256K log 'log_radio'

[ 2.943105] logger: created 256K log 'log_system'

[ 2.949091] Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics

[ 2.954396] audss_init: RCLK SRC[busclk]

[ 2.958909] max98089 0-0010: revision 0x81

[ 2.973215] [MAX98089] max98089_set_record_main_mic(267)

[ 2.974532] asoc: max98089-aif1 <-> samsung-i2s.0 mapping ok

[ 2.979793] asoc: max98089-aif1 <-> samsung-i2s.0 mapping ok

[ 2.985319] ODROID JACK: Registering audio-jack driver

[ 2.989642] odroid_jack_probe tvout_state = 0

[ 2.994232] Samsung SRP driver, (c)2011 Samsung Electronics

[ 2.999712] ALSA device list:

[ 3.002247] #0: Ooroid-MAX98089

[ 3.005627] GACT probability NOT on

[ 3.009003] Mirror/redirect action on

[ 3.012663] u32 classifier

[ 3.015349] Actions configured

[ 3.018723] Netfilter messages via NETLINK v0.30.

[ 3.023472] nf_conntrack version 0.5.0 (12064 buckets, 48256 max)

[ 3.029573] mmc1: new high speed SDHC card at address b368

[ 3.035370] mmcblk0: mmc1:b368 USD 7.46 GiB

[ 3.039903] ctnetlink v0.93: registering with nfnetlink.

[ 3.044728] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[ 3.051898] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

[ 3.057468] mmcblk0: p1 p2 p3 p4

[ 3.060755] mmcblk0: p1 size 13153920 extends beyond EOD, truncated

[ 3.067016] xt_time: kernel timezone is -0000

[ 3.072619] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 3.077285] arp_tables: (C) 2002 David S. Miller

[ 3.081317] TCP cubic registered

[ 3.085535] NET: Registered protocol family 10

[ 3.091712] Mobile IPv6

[ 3.091769] ip6_tables: (C) 2000-2006 Netfilter Core Team

[ 3.097931] IPv6 over IPv4 tunneling driver

[ 3.104768] NET: Registered protocol family 17

[ 3.105295] NET: Registered protocol family 15

[ 3.109759] Bluetooth: RFCOMM TTY layer initialized

[ 3.117771] Bluetooth: RFCOMM socket layer initialized

[ 3.119660] Bluetooth: RFCOMM ver 1.11

[ 3.123443] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 3.128704] Bluetooth: BNEP filters: protocol multicast

[ 3.133987] NET: Registered protocol family 33

[ 3.138778] RxRPC: Registered security type 2 'rxkad'

[ 3.143410] NET: Registered protocol family 35

[ 3.148080] lib80211: common routines for IEEE802.11 drivers

[ 3.153453] EXYNOS4210: Adaptive Support Voltage init

[ 3.158687] exynos4210_check_vdd_arm: current vdd_arm(1250000uV), set vdd_arm (1.2V)

[ 3.166777] <6>Support 1.0GHz

[ 3.169135] <6>ASV Group for This Exynos4210 is 0x20000000

[ 3.174620] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2

[ 3.182272] Registering SWP/SWPB emulation handler

[ 3.187047] DVFS : VDD_ARM Voltage table set with 0 Group

[ 3.192829] DVFS : VDD_INT Voltage table set with 0 Group

[ 3.197816] exynos4_integrated_dvfs_hotplug_init, max(1000000),min(200000)

[ 3.205437] regulator_init_complete: VDD_LDO21: incomplete constraints, leaving on

[ 3.212286] s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-04 19:41:13 UTC (947014873)

[ 3.221604] FIMC0 registered successfully

[ 3.225043] FIMC1 registered successfully

[ 3.228977] FIMC2 registered successfully

[ 3.233038] FIMC3 registered successfully

[ 3.236864] S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics

[ 3.245433] Freeing init memory: 216K

[ 3.292739] MFC F/W loaded successfully (size: 353404)

[ 3.868571] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[ 3.875238] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[ 4.797327] IRQ112 no longer affine to CPU1

[ 4.798182] CPU1: shutdown

[ 5.234058] EXT4-fs (mmcblk0p3): recovery complete

[ 5.237733] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)

[ 6.166410] EXT4-fs (mmcblk0p4): recovery complete

[ 6.170118] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)

[ 6.224818] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.

[ 6.316863] adb_open

# [ 6.728587] warning: `rild' uses 32-bit capabilities (legacy support in use)

[ 6.786739] ttyACM0: Entering acm_tty_open.

[ 6.792475] usb 1-1.3: disconnected from network [MAX98089] max98089_set_playback_speaker(90)

[ 11.521285] CPU1: Booted secondary processor

[ 11.525042] Switched to NOHz mode on CPU #1

[ 14.242463] request_suspend_state: wakeup (3->0) at 14242437093 (2000-01-04 19:41:24.522686216 UTC)

[ 14.251236] init: untracked pid 1117 exited

[ 14.251370] init: untracked pid 1121 exited

[ 17.649760] request_suspend_state: wakeup (0->0) at 17649733969 (2000-01-04 19:41:27.929981717 UTC)

[ 17.657013] init: untracked pid 1188 exited

[ 17.657883] init: untracked pid 1187 exited

[ 18.692229] IRQ112 no longer affine to CPU1

[ 18.692937] CPU1: shutdown

[ 20.613066] CPU1: Booted secondary processor

[ 20.615048] Switched to NOHz mode on CPU #1

[ 23.338391] request_suspend_state: wakeup (0->0) at 23338364846 (2000-01-04 19:41:33.618613136 UTC)

[ 23.346760] init: untracked pid 1208 exited

[ 23.346883] init: untracked pid 1209 exited

[ 24.192264] IRQ112 no longer affine to CPU1

[ 24.192982] CPU1: shutdown

[ 25.125949] CPU1: Booted secondary processor

[ 25.130048] Switched to NOHz mode on CPU #1

[ 27.847472] request_suspend_state: wakeup (0->0) at 27847446432 (2000-01-04 19:41:38.127694722 UTC)

[ 27.855751] init: untracked pid 1237 exited

[ 27.855876] init: untracked pid 1238 exited

[ 28.792276] IRQ112 no longer affine to CPU1

[ 28.792993] CPU1: shutdown

[ 30.612913] CPU1: Booted secondary processor

[ 30.615065] Switched to NOHz mode on CPU #1

[ 33.340391] request_suspend_state: wakeup (0->0) at 33340367100 (2000-01-04 19:41:43.620616057 UTC)

[ 33.347632] init: untracked pid 1265 exited

[ 33.348071] init: untracked pid 1266 exited

[ 34.292254] IRQ112 no longer affine to CPU1

[ 34.292959] CPU1: shutdown

[ 35.120964] CPU1: Booted secondary processor

[ 35.125064] Switched to NOHz mode on CPU #1

[ 37.868621] request_suspend_state: wakeup (0->0) at 37868595937 (2000-01-04 19:41:48.148844352 UTC)

[ 37.876919] init: untracked pid 1293 exited

[ 37.877039] init: untracked pid 1294 exited

[ 38.792241] IRQ112 no longer affine to CPU1

[ 38.792952] CPU1: shutdown

[ 40.621443] CPU1: Booted secondary processor

[ 40.625068] Switched to NOHz mode on CPU #1

[ 43.606948] request_suspend_state: wakeup (0->0) at 43606921856 (2000-01-04 19:41:53.887170480 UTC)

[ 43.615254] init: untracked pid 1320 exited

[ 43.615379] init: untracked pid 1321 exited

[ 49.192237] IRQ112 no longer affine to CPU1

[ 49.193062] CPU1: shutdown

[ 50.026393] CPU1: Booted secondary processor

[ 50.030041] Switched to NOHz mode on CPU #1

[ 52.762900] request_suspend_state: wakeup (0->0) at 52762871610 (2000-01-04 19:42:03.043120942 UTC)

[ 52.770444] init: untracked pid 1376 exited

[ 52.770732] init: untracked pid 1377 exited

[ 53.692271] IRQ112 no longer affine to CPU1

[ 53.692981] CPU1: shutdown

[ 54.110186] PRESS KEY : KEY_POWER

[ 55.517395] CPU1: Booted secondary processor

[ 55.520062] Switched to NOHz mode on CPU #1

[ 58.246400] request_suspend_state: wakeup (0->0) at 58246373197 (2000-01-04 19:42:08.526622320 UTC)

[ 58.254494] init: untracked pid 1402 exited

[ 58.254616] init: untracked pid 1403 exited

[ 59.110242] odroid_poweroff_timer : setting GPIO_PDA_PS_HOLD low.

[ 59.192133] IRQ112 no longer affine to CPU1