Pirate ship Large bag 1 3-05)



Download 152.25 Kb.
Page1/3
Date13.07.2017
Size152.25 Kb.
#23261
  1   2   3
Pirate ship

Large bag 1 (0.3-05)

Bag 0.3

1. Make assorted men with weapons.

2. Put a 2x2 circle on top of the barrel and put two bottles with plugs on it.

Bag 0.4

1. Make a table. Put a flat 6x2 on top of a flat 6x1.

2. Put two flat lipped 2x1 under the 6x2, in the opposite corners (two buttons in the middle remain free)

3. Put four cylinders in the four corners under the table to make legs.

4. Put a flat smooth 2x2 on the table (it's a map), two jars with covers and a chess piece (it that's what it is!). The chess piece fits between the buttons.

Bag 0.5

1. Put a handle in the bucket.

2. Put three cannons into the cannon carriers.

3. Put six cylinders into the box to make cannonballs. Just throw them in.

Large bag 2 (1-28)

Bag 1-3.

1. Insert two sticks into the two holes on both sides of the large rectangular boat base piece. Connect it with the second and with the third such pieces.

2. Insert two sticks into two holes on both sides. Put it horizontally in front of you.

3. Put a flat smooth 2x2 next to the back wall, skipping the first column from the left.

4. Skip four columns to the right and put another flat smooth 2x2.

5. Skip six columns to the right and put another flat smooth 2x2.

6. Skip four columns to the right and put another flat smooth 2x2.

7. Put four flat 2x2 pieces in front of the previous four pieces.

8. Put four flat smooth 2x2 pieces next to the front wall, symmetrically to the previous four smooth flat pieces (on the same columns).

9. Put four flat 2x2 pieces to the back of the previous four flat smooth pieces.
There is no separate bag 4. Use the large pieces from the large bag.

Put the large end bracket piece on top of the large end piece. Repeat. Connect these parts to the opposite ends of your structure to make the foundations of the ship.

Bag 5-6.

1. Put a 1x1 button on top of a 1x1 piece. Repeat three times to make four such parts. Put two of these parts on the first row of the front wall, in the leftmost and rightmost ends.

2. Put the other two parts on the back row of the back wall, also in the opposite ends.

3. Put three 10x2 flat pieces on the front wall and three on the back wall.

Bag 7-8.

1. Put a 4x2 piece horizontally on the leftmost buttons of the front wall (to the right of the 1x1 with the button on top).

2. Put a flat smooth 2x1 horizontally to the right of it, on the first row.

3. Put a 4x2 horizontally to the right of it.

4. Put a flat smooth 2x1horizontally to the right of it, on the first row.

5. Put a 2x2 to the right.

6. Skip two buttons to the right and put a 2x2.

7. Put a flat smooth 2x1 horizontally to the right on the first row.

8. Put a 4x2 horizontally to the right of it.

9. Put a flat smooth 2x1 horizontally to the right of it, on the first row.

10. Put a 4x2 horizontally to the right of it.

11. Repeat the sequence symmetrically on the back wall, with the flat smooth pieces on the back row.

12. Put a ten-button circle in the very center of the floor, one column to the right from the second pair of the 2x2/smooth 2x2 pieces from the left, and one row to the front from the back four pairs.

13. Put one 2x1 horizontally in front of the circle, and one at the back.

Bag 9-10.

1. Put a 2x1 piece with the toe on the front two buttons of the circle, with the toe on the 2x1 piece in front of it.

2. Put another 2x1 piece with the toe on the back two buttons of the circle, with the toe on the 2x1 piece at the back of it.

3. Put a flat 2x1 in between two flat 2x1 pieces with a handle. Repeat.

4. Put one such part in the middle of the front wall, in between the two 2x2 pieces, on the front row, handles to the front.

5. Put the other part symmetrically on the back wall, handles to the back.

6. Go to the right end. Put a 2x1 vertically on the first column on the right (on the floor, not on the steps), in the middle (skipping two rows from the front).

7. Put a flat 4x2 horizontally to the left of it, also in the middle.

8. Put a flat 2x1 vertically to the front of the leftmost column of the previous piece (on the 5th column of the floor).

9. Put a flat 2x1 vertically to the back of the 4x2 flat piece, on the 5th column of the floor.

10. Put a 1x1 piece with the toe vertically to the back of the previous piece, toe to the back, on the same 5th column.

11. Put a 1x1 piece with the toe vertically to the front of the other flat 2x1 piece, toe to the front, on the same column.

Bag 11-12

1. Put an 8x1 arch vertically on top of the two 1x1 pieces with the toes.

2. Put a 10-button circle to the left of the 4x2 flat piece and the arch, in the middle of the floor.

3. Put two 2x1 pieces vertically on the ends of the arch.

4. Put a flat 2x1 vertically in the middle of the arch.

5. Put a 4-button flat circle in the middle of the top step of the right end of the ship.

Bag 13-14

1. Flip a flat 12x2 piece over. Put a smooth flat circle on one end of it.

2. Flip the part over. Put a flat 4x2 horizontally on the same end of the 12x2 piece.

3. Put this part vertically with the empty end on the left, on top of the middle of the arch, on the flat 2x1 piece, and align it on the left, so that the right side is on the 4-button flat circle and protrudes to the right.

4. Make a little tower with the flat circle on the bottom, then the fat circle, then the flat one, then the fat one on top.

5. Put this part on top of the right-side 12-button circle, in the middle.

Bag 15-16

1. Put a flat holey 4x2 piece horizontally on top of the tower to connect it to the 12x2 flat piece on top of the arch by two buttons.

2. Put a flat 2x2 piece on the front wall, on the right, on the first step.

3. Repeat at the back.

4. Put a 2x1 piece horizontally on the right end of the front wall (partly on top of the 1x1 button).

5. Put a flat 2x1 piece to the left of it.

6. Put a 4x1 arch piece to the left, to connect the two 4x2 pieces.

7. Put a flat 2x1 piece to the right of it.

8. Repeat steps 2-5 on the back wall, on the right side.

Bag 17-18

1. Put four 2x1 pieces on top of the four flat 2x1 pieces from the previous bag.

2. Put a 1x1 piece on the second row of the back wall, to the front of the arch, on the leftmost button of the 4x2 piece.

3. Put a 1x1 piece on the second row of the back wall, to the left of the previous piece, on the rightmost button of the next 4x2 piece, to the front of the arch.

4. Put a flat 2x1 vertically on the front wall, on the right, on the first step, on the right two buttons of the flat 2x2 piece.

5. Put a flat 2x1 with the roll horizontally to the left of it, on the first row of the front wall, rolls to the front.

6. Put a 1x1 button to the left of it.

7. Skipping two buttons to the left, put another 1x1 button.

8. Put a flat 2x1 piece with the roll to the left, roll to the front.

9. Put a 1x1 button to the left.

10. Put a flat 4x2 piece horizontally to the back of the previous three pieces.

11. Repeat steps 4-10 on the back wall, with the rolls to the back.

Bag 19-20

1. Put a flat 12x2 horizontally on the right side of the front wall.

2. Do the same on the back wall.

3. Make a rudder. Put a flat 4x2 horizontally in front of you. Put a 3x1 with the holder vertically on the right side of it, holder to the right.

4. Put a 2x2 to the left of it.

5. Put a 2x2 on top, aligned on the right.

6. Put a 2x1 with the holder vertically on top, on the right, holder to the right.

7. Put a stick into the two holders.

8. Flip the ship upside down. Flip your part upside down and insert it in the right end, stick side to the right.

Bag 21-22.

1. Make the movable part of the rudder. Put a 1x1 button on the bottom of a 1x1 piece with the side button. Put another 1x1 button on top of it.

2. Put another 1x1 piece with the side button on top.

3. Put a 1x1 button on top.

4. Make sure that the side buttons are facing right. Put a flat 3x1 on the bottom, so that the two left buttons of it remain free.

5. Put a tall 1-button wedge piece on these two buttons, slide side to the left.

6. Put a flat smooth 2x1 piece on top.

7. Put two clasps on the right side, in the side buttons.

8. Flip your part upside down and connect to the other half of the rudder by putting the clasps on the stick. Put aside.

9. Make the other underneath part of the ship. Put a flat 4x2 horizontally in front of you. Put a 2x2 with the lip on the two rightmost buttons of it, lip to the right.

10. Put a 2x2 piece to the left of it.

11. Put another 2x2 with the lip on the two right buttons of the first lipped piece, lip to the right.

12. Put a 2x2 piece to the left.

13. Make the third level the same way. Put the third lipped piece on the two right buttons of the second. Put a 2x2 to the left.

14. Put a 2x2 on the top, in the middle.

15. Flip your part upside down, steps to the right, and insert it into the left opening of the ship. Flip the ship right side up (the rudder on the right).

Bag 23-25.

1. Put a flat 2x1 on top of a 2x2 piece, vertically, on the right side.

2. Put a 2x1 underneath the 2x2 piece, the same way.

3. Put this part in the middle of the left side of the floor, so that the left side of the 2x2 rests on the first step.

4. Put a 2x2 piece underneath the 6x2 piece, on the right end.

5. Put this part on the left-side steps, the 2x2 piece resting partly on the other 2x2 piece and partly on the second step, and the whole part connecting with the underneath part of the ship.

6. Put one flat 2x1 on top of the other (different colors!). Put two 1x1 pieces with the side buttons on top, side by side, with the side buttons to the right.

7. Put another flat 2x1 piece on top.

8. Put this part to the left of the 6x2 piece, on the very left end of the ship.

9. Put a 12-button circle in the middle of the left side of the floor, to the right of the stepped part you made earlier in this bag.

Bag 26-27.

1. Put a 2x2 circle on top of the flat 2x2 circle.

2. Put another flat 2x2 circle on top.

3. Put a 2x2 circle on top.

4. Put this part on top of the left 12-button circle.

5. Put a flat 2x1 on top of a 2x1.

6. Put a flat holey 4x2 on top, with the leftmost two buttons resting on it and protruding to the right.

7. Put this part partly on top of the left-side tower, partly on the step to the left.

Large bag 3.

Bag 28-29.

1. Insert a double-clasp piece into the side holes of a 3x1 piece with the side holes.

2. Repeat.

3. Put one of this parts horizontally in the middle of the front wall, on top of the two handles, clasps to the front.

4. Put the other part horizontally in the middle of the back wall, clasps to the back.

5. Put one 4x1 arch piece horizontally to the right of the previous piece and one to the left.

6. Do the same at the front.

7. Put a 2x1 flat piece horizontally to the left of the previous piece (left).

8. Put a 4x1 arch piece horizontally to the left of the previous piece.

9. Put a 2x1 flat piece to the left,

10. put a 2x1 piece horizontally to the left..

11. Put a flat 2x1 piece to the left, on the first step.

12. Repeat steps 7-11 at the back.

Bag 30-31

1. Go to the second row of the front wall. Put a 1x1 piece on the rightmost button of the left 4x2 piece, at the back of the left leg of the left 4x1 arch.

2. Skipping two buttons to the right, put a 1x1 piece at the back of the other leg of the same arch.

3. Skipping two buttons to the right, put a 1x1 piece at the back of the left leg of the next arch.

4. Skipping two buttons to the right, put a 6x1 piece horizontally in the middle of the front wall, at the back of the double-clasp piece.

5. Skipping two buttons to the right, put a 1x1 piece at the back of the next arch.

6. Repeat steps 1-5 at the back.

7. Put a flat 2x1 vertically on the left side of the first step on the left side of the front wall, on top of the flat 2x1.

8. Put a flat 2x1 with the handle horizontally to the right of it, on the first row, handle to the front.

9. Put a 1x1 button to the right.

10. Put 1x1 buttons at the ends of the next three arches to the right.

11. Put flat 2x1 pieces with the handles in the middle of the same arches, in between the 1x1 buttons, handles to the front.

12. Repeat steps 7-11 at the back.

Bag 32-33

1. Put a flat 4x2 horizontally in the middle of the front wall, over the double-clasp piece.

2. Skipping four buttons to the left, put a 2x1 piece horizontally on the flat 2x1 piece.

3. Skipping four buttons to the left, put a 2x1 piece horizontally on the flat 2x1 piece.

4. Repeat steps 1-3 on the back wall.

5. Go to the second row of the front wall. Skipping six buttons from the left, put a flat 4x2 piece horizontally on the second row, protruding to the back (and forming the third row of the wall).

6. Skip two buttons to the right and do it again.

7. Skip four buttons to the right and do it again.

8. Repeat steps 5-7 at the back wall.

Bag 34-35.

1. Put three flat 12x2 pieces horizontally on the first and second rows of the front wall.

2. Do the same at the back.

3. Flip the ship upside down. Put a flat 6x2 piece horizontally in the middle of the ship, upside down.

4. Put four 2x2 flat smooth circles in the front wall, at the points where the large pieces of the ship connect.

5. Do the same at the back.

6. Put one 2x2 flat smooth circle at the right, on the right side of the rudder (on the unmovable part).

7. Put one 2x2 flat smooth circle at the left, on the left side of the prow. Flip the ship the right side up.

Bag 36-37.

1. Make an anchor winch. Put a 2x2 flat piece with the holes in it on top of a 2x2 flat piece.

2. Put a 2x2 flat circle on top.

3. Put a chain on one of the buttons on top.

4. Put three 1x1 buttons on the rest of the buttons of the 2x2 flat piece.

5. Put a 2x2 cylinder on top.

6. Insert a short ribbed stick in the cylinder.

7. Put a cross with the ring inside on the stick.

8. Connect the other end of the chain to the anchor on the top ( the bottom of the anchor has two sharp ends).

9. Insert a longer smooth stick in the hole under the chain button.

10. Put the winch in the middle of the floor, on the left side, skipping one column to the left from the left-side 12-button circle. Throw the anchor on the floor.

11. If you want to, put the stickers with the ugly skulls on the twelve flags. Insert the flags - six on each side - at the rolls on the 2x1 flat pieces with the rolls that are built into the sides of the ship.

12. Put the three cannons on the floor, into the three right holes at the back wall.

Bag 38-40

1. Put a flat smooth 2x2 on the rudder, on right end.

2. Put another flat smooth 2x2 to the left of it.

3. Put two 1-button hammer pieces to the left of it, vertically, buttons facing each other.

4. Put two 1x1 buttons on the hummers.

5. Put five 2x1 flat smooth pieces vertically on the curving segment of the front wall, on the right, forming a step pattern.

6. Repeat at the back.

7. Put one flat smooth 2x2 piece at the back and one at the front, to the left of the previous pieces, on the rightmost buttons of the walls.

8. Put a flat smooth 8x1 piece vertically to the left of the previous piece at the front, to make a bridge to the middle and to rest on the forth column to the right of the flat 4x2 holey piece on top of the right tower.

9. Do the same at the back, so that the two pieces meet in the middle to form a continuous bridge.

10. Put a 2x1 tall wedge piece on the front wall, to the left of the flat smooth 8x1 piece, horizontally, slide side to the front.

11. Put a 2x1 short wedge piece to the left of it, the same way.

12. Put a 1x1 piece with the clasp on top of the previous piece, on its right button, clasp to the back.

13. Repeat steps 10-12 at the back, symmetrically.

Bag 41-42

1. Cover the tall wedge in front and the 1x1 piece with the clasp to the left of it by a flat 3x1 piece.

2. Put a stepped curved piece horizontally to the left of it, curve to the left, resting on the free button of the short wedge.

3. Repeat steps 1-2 at the back.

4. Go to the front again. Put a 1x1 cone in the middle of the flat 3x1 on top of the wedge.

5. Put a flat 1x1 with the roll on top of the tall side of the stepped curve, roll to the left.

6. Put a flat smooth 4x1 piece with its right end on the rolled piece, and the middle on the cone.

7. Repeat steps 4-6 at the back.

Bags 43-44

1. Put two clasps on top of a 2x1 piece, vertically.

2. Insert a stick in the clasps.

3. Repeat.

4. Put one such part in the first row of the front wall, skipping one button to the left from the shorter wedge, to the front of the curved stepped piece.

5. Do the same at the back.

6. Put two rifles into the clasps inside the front and the back wall, muzzles up.

7. Insert the stick into the right tower, in the right hole of the flat 4x2 holey piece.



Download 152.25 Kb.

Share with your friends:
  1   2   3




The database is protected by copyright ©ininet.org 2022
send message

    Main page