System Parameters Message

2.6.2.2.1 System Parameters Message

If PAGE_CHAN, REG_PRD, BASE_LAT, BASE_LONG, or PWR_REP_THRESH are not within the valid ranges specified in 3.7.2.3.2.1, then the mobile station shall ignore the System Parameters Message that contains them.

If BAND_CLASS is equal to ‘00001’ and if EXT_SYS_PARAMETERS_r is not equal to ‘1’, the mobile station shall ignore the System Parameters Message containing these fields.

2.6.2.2.1.1 Stored Parameters

• Configuration message sequence number (CONFIG_MSG_SEQ_s = CONFIG_MSG_SEQ_r, SYS_PAR_MSG_SEQ_s = CONFIG_MSG_SEQ_r)

• Base station identification (BASE_ID_s = BASE_ID_r)

• Base station class (BASE_CLASS_s = BASE_CLASS_r)

• Maximum slot cycle index (MAX_SLOT_CYCLE_INDEX_s = MAX_SLOT_CYCLE_INDEX_r)

• Home registration indicator (HOME_REG_s = HOME_REG_r)

• SID roamer registration indicator (FOR_SID_REG_s = FOR_SID_REG_r)

• NID roamer registration indicator (FOR_NID_REG_s = FOR_NID_REG_r)

• Power-up registration indicator (POWER_UP_REG_s = POWER_UP_REG_r)

• Power-down registration indicator (POWER_DOWN_REG_s = POWER_DOWN_REG_r)

• Parameter-change registration indicator (PARAMETER_REG_s = PARAMETER_REG_r)

• Search window size for the Active Set and Candidate Set (SRCH_WIN_A_s = SRCH_WIN_A_r)

• Search window size for the Neighbor Set (SRCH_WIN_N_s = SRCH_WIN_N_r)

• Search window size for the Remaining Set (SRCH_WIN_R_s = SRCH_WIN_R_r)

• Maximum age for retention of Neighbor Set members (NGHBR_MAX_AGE_s = NGHBR_MAX_AGE_r)

• Power control reporting threshold (PWR_REP_THRESH_s = PWR_REP_THRESH_r)

• Power control reporting frame count (PWR_REP_FRAMES_s = PWR_REP_FRAMES_r)

• Threshold report mode indicator

• Periodic report mode indicator (PWR_PERIOD_ENABLE_s = PWR_PERIOD_ENABLE_r).

• Power report delay (PWR_REP_DELAY_s = PWR_REP_DELAY_r)

• Pilot detection threshold (T_ADD_s = T_ADD_r)

• Pilot drop threshold (T_DROP_s = T_DROP_r)

• Active Set versus Candidate Set comparison threshold (T_COMP_s = T_COMP_r)

• Drop timer value (T_TDROP_s = T_TDROP_r)

• Drop timer range value (T_TDROP_RANGE_s = T_TDROP_RANGE_r) if T_TDROP_RANGE_INCL_r is equal to '1'; otherwise, T_TDROP_RANGE_s = '0000'

• Extended System Parameters Message sent (EXT_SYS_PARAMETER_s = EXT_SYS_PARAMETER_r)

• Global Service Redirection Message sent (GLOBAL_REDIRECT_s = GLOBAL_REDIRECT_r)

• Extended Global Service Redirection Message sent (EXT_GLOBAL_REDIRECT_s = EXT_GLOBAL_REDIRECT_r)

• Extended Neighbor List Message sent

• General Neighbor List Message sent

• User Zone Identification Message sent

• Private Neighbor List Message sent

• Extended CDMA Channel List Message sent

• If NEG_SLOT_CYCLE_INDEX_SUP_r is included and equal to ‘1’, the mobile station shall set MIN_SLOT_CYCLE_INDEX to -4; otherwise, the mobile station shall set MIN_SLOT_CYCLE_INDEX to 0.

• Call Recovery Request Message supported indicator (CRRM_MSG_IND_s = CRRM_MSG_IND_r).

The mobile station shall also store the following parameters:

• If the mobile station is not in the Origination Attempt Substate, or Page Response Substate, the mobile station shall store the following prior to storing the remaining parameters:

– Registered system identification (REG_SID_s = SID_s).

– Registered network identification (REG_NID_s = NID_s).

• 
  Registered registration zone (REG_REG_ZONE_s = REG_ZONE_s).
  
• 
  Registered zone timer length (REG_ZONE_TIMER_s = ZONE_TIMER_r).
  

• Network identification (NID_s = NID_r)

• Registration zone (REG_ZONE_s = REG_ZONE_r)

• Number of registration zones to be retained (TOTAL_ZONES_s = TOTAL_ZONES_r)

• Zone timer length (ZONE_TIMER_s = ZONE_TIMER_r)

• Multiple SID storage indicator (MULT_SIDS_s = MULT_SIDS_r)

• Multiple NID storage indicator (MULT_NIDS_s = MULT_NIDS_r)

• Registration period (REG_PRD_s = REG_PRD_r)

• Base station latitude (BASE_LAT_s = BASE_LAT_r)

• Base station longitude (BASE_LONG_s = BASE_LONG_r)

• Registration distance (REG_DIST_s = REG_DIST_r)

• Base station horizontal location uncertainty (LOC_UNC_H_s = LOC_UNC_H_r)

• Base station height (HEIGHT_s = HEIGHT_r)

• Base station verticl location uncertainty (LOC_UNC_ V_s = LOC_UNC_V_r)

If EXT_SYS_PARAMETER_s is equal to ‘0’, then the mobile station shall perform the following:

• Set EXT_SYS_PAR_MSG_SEQ_s to CONFIG_MSG_SEQ_s,

• Set BCAST_INDEX_s to MAX_SLOT_CYCLE_INDEX_s,

• Set IMSI_O to IMSI_M by setting IMSI_O_S_s to IMSI_M_S_p (i.e., setting IMSI_O_S1_s to IMSI_M_S1_p and IMSI_O_S2_s to IMSI_M_S2_p), MCC_O_s to MCC_M_p, IMSI_O_11_12_s to IMSI_M_11_12_p, and IMSI_O_ADDR_NUM_s to IMSI_M_ADDR_NUM_p,

• Set RESELECT_INCLUDED_s to ‘0’,

• For Band Class 0, if the mobile station determines it is operating in Korea, set P_REV_s to ‘00000010’; otherwise, set P_REV_s to ‘00000011’. For Band Class 3, set P_REV_s to ‘00000011’. For Band Class 1 and Band Class 4, set P_REV_s to ‘00000001’, and

• Set P_REV_IN_USE_s to the lesser value of P_REV_s and MOB_P_REV_p of the current band class.

If EXT_CHAN_LST_s is equal to ‘0’, then the mobile station shall set EXT_CHAN_LST_MSG_SEQ_s to CONFIG_MSG_SEQ_s.

If GLOBAL_REDIRECT_s is equal to ‘0’, then the mobile station shall set GLOB_SERV­_REDIR_MSG_SEQ_s to CONFIG_MSG_SEQ_s.

If EXT_GLOBAL_REDIRECT_s is equal to ‘0’, then the mobile station shall set EXT_GLOB_SERV­_REDIR_MSG_SEQ_s to CONFIG_MSG_SEQ_s.

If EXT_NGHBR_LST_s is equal to ‘0’, then the mobile station shall set EXT_NGHBR_LST_MSG_SEQ_s to CONFIG_MSG_SEQ_s.

If GEN_NGHBR_LST_s is equal to ‘0’, then the mobile station shall perform the following:

• Set GEN_NGHBR_LST_MSG_SEQ_s to CONFIG_MSG_SEQ_s.

• Set the SRCH_WIN_NGHBR field of NGHBR_REC to SRCH_WIN_N_s for all entries.

• Set the SRCH_OFFSET_NGHBR field of NGHBR_REC to ‘000’ for all entries.

• Set the TIMING_INCL field of NGHBR_REC to ‘0’ for all entries.

• Set RESQ_ENABLED_s to ‘0’.

• Set the NGHBR_RESQ_CONFIGURED field of NGHBR_REC to ‘0’ for all entries.

• If EXT_NGHBR_LST_s is equal to ‘0’:

– Set the SEARCH_PRIORITY field of the NGHBR_REC to ‘10’ (high) for all entries.

– Set the NGHBR_BAND field of the NGHBR_REC to CDMABAND_s for all entries.

– Set the NGHBR_FREQ field of the NGHBR_REC to CDMACH_s for all entries.

If GEN_NGHBR_LST_s is equal to ‘1’, GEN_NGHBR_LST_MSG_SEQ_s is equal to CONFIG_MSG_SEQ_s, and SETTING_SEARCH_WIN is equal to ‘1’, the mobile station shall perform the following:

• Set the SRCH_WIN_NGHBR field of each NGHBR_REC to SEARCH_WIN_N_s for all NGHBR_SET_SIZE_s entries.

• Set SETTING_SEARCH_WIN to ‘0’.

If USER_ZONE_ID_s is equal to ‘0’, then the mobile station shall perform the following:

• 
  Set USER_ZONE_ID­_MSG_SEQ_s to CONFIG_MSG_SEQ_s.
  
• 
  Set the UZID field of the UZ_REC to ‘0000000000000000’ for all entries.
  
• 
  Set the UZ_REV field of the UZ_REC to ‘0000’ for all entries.
  
• 
  Set the TEMP_SUB field of the UZ_REC to ‘0’ for all entries.
  

If PRI_NGHBR_LST_s is equal to ‘0’, then the mobile station shall set PRI_NGHBR_LST_MSG_SEQ_s to CONFIG_MSG_SEQ_s.

If PRI_NGHBR_LST_s is equal to ‘1’ and the mobile station does not support Tiered Services, then the mobile station shall set PRI_NGHBR_LST_MSG_SEQ_s to CONFIG_MSG_SEQ_s.

The mobile station shall also store the following parameters:

• Access Point Pilot Information Message sent
(AP_PILOT_INFO_s = AP_PILOT_INFO_r) if included; otherwise, AP_PILOT_INFO_s = ‘0’

If the APPIM_PERIOD_INDEX is included in the message APPIM_PERIOD_INDEX_s = APPIM_PERIOD_INDEX_r. Otherwise, APPIM_PERIOD_INDEX_s= 0.

• Access Point Identification Message sent
(AP_IDT_s = AP_IDT_r) if included; otherwise, AP_IDT_s = ‘0’

• Access Point Identification Text Message sent

• General Overhead Information Message sent

If the GEN_OVHD_CYCLE_INDEX is included in the message GEN_OVHD_CYCLE_INDEX_s = GEN_OVHD_CYCLE_INDEX_r. Otherwise, GEN_OVHD_CYCLE_INDEX_s = 0.

• Flex Duplex CDMA Channel List Message sent
(FD_CHAN_LST_IND_s = FD_CHAN_LST_IND_r) if included; otherwise, FD_CHAN_LST_IND_s = ‘0’.

• Alternative Technologies Information Message sent

If the ATIM_CYCLE_INDEX is included in the message ATIM_CYCLE_INDEX_s = ATIM_CYCLE_INDEX_r. Otherwise, ATIM_CYCLE_INDEX_s = 0.

The mobile station shall ignore any fields at the end of the System Parameters Message that are not defined according to the protocol revision level (MOB_P_REV_p of the current band class) being used by the mobile station.