B.Graduate Students-Thesis Advisor/ Committee Chair (71/79)

B.Graduate Students-Thesis Advisor/ Committee Chair (71/79)

Butler, David S. – “Stress Distribution Characteristics of MSME

The Stiller-Smith Mechanism Geartrain” (5/87)
Churchill, Randolph – “A Sinusoidal Low-Heat- MSME

Rejection Engine Model” (5/88)

Resonator and R.F. Power Processing” (8/88)

And Slider-Crank Mechanisms for Eight Cylinder Internal (5/89)

Combustion Engine Use”
Smith, John C. – “Analysis of Plain Bearings in an Eight MSME

Cylinder Internal Combustion Engine Utilizing (12/89)

the Stiller-Smith Mechanism”
Wyatt, Christopher – “Liquid Parameter Study Involved MSME

In the Removal of a Fluid from a Moving Sheet (5/90)

By an Air-Jet Nozzle”
Preece, William – “Analysis of Microscopic Particles MSME

In a Multi-Phase Flow with a Computer-Aided (5/91)

Vision System”
Corley, Mary – “Application of the Stiller-Smith MSME

Mechanism as the Driving Mechanism in a (5/91)

High-Pressure Hydraulic Pump”
Thompson, Greg – “Momentum and Heat Transfer Characteristics MSME

Of a Low-Prandtl-Number Fluid” (5/91)

Pressure Field in a Hydrocyclone” (8/91)

With an Interacting Adjacent Surface” (12/92)

Wright, Marshala M. – “Evaluation of a Solid State MSME

Electrochemical Cell for NOx Reduction” (12/92)

Color Image for Quality Control” (5/93)

Toroidal Helical Antenna” (12/93)

Configuration for the Beta Rand Cam^TM Engine” (12/94)

Vision Colorimeter” (12/94)

(12/94)
Sharma, Pradeep – “Design and Analysis of a Planetary Gear MSME

Continuously Variable Transmission” (12/94)
Braden, Christopher – “Assessment of the Vane Sealing MSME

System within the Rand Cam Engine” (2/95)

Of a Machine Vision Light/Camera System” (12/95)

(8/95)
Orndorf, Raymond – “Geometric Design of a Rand Cam MSME

Automotive Air Conditioning Compressor” (12/95)
Rao, Avinash – “Crash Analysis of a Mid Sized Car MSME

Subjected to Side Impacts” (12/96)

Performance Evaluation” (12/96)

Pin Cam Design Based on the Parameters Used for the (5/97)

Axial Vane Rotary Engine (Beta Version)”
Halder, Tuhin – “Design Analysis of the Vane of an Axial MSME

Vane Rotary Engine” (5/97)

(9/97)
Lu, Zhijian – “Acceleration Simulation of a Vehicle with a MSME

Continuously Variable Power Split Transmission” (8/98)
Guan, Tao – “Impedence Effects of Metallic Ground Plane MSME

on the CTHA Antenna” (12/98)

Instrumentation and Data Acquisition Module for (5/99)

Testing and Analysis of the CTHA”
ElSherbini, Khaled – “Contrawound Toroidal Helical Antenna Ph.D.

Modeling Using the FDTD Method” (5/00)

RF IC Ignition Source” (8/00)

Monitoring Miotic Eye Responses” (5/01)

Continuously Variable Transmission” (5/03)

Reduction on a V-22 Model” (5/03)

Applications to Classical Mechanical Problems” (12/03)

Deployment System Arm Using Finite Element Methods” (5/04)

Of the C-130 Project Oculus Mechanical Arm/Pod Sensor (8/04)

Deployment System Using the Finite Element Method”
Wowczuk, Zenovy – “Design of a Sensor Pallet Platform for a MSME

C-130 Aircraft” (8/04)

For the V-22 Osprey Wing” (12/04)

Aircraft Structures Using a Magnetic Flux Leakage Method” (5/05)

(8/05)
Donatelli, Pete – “Methods for Creating a Multi-Axis Polarizer MSME

for Visible Light Attenuation by Linear Translation” (8/05)

O’Hara, Brian – “Comparison of Numerical Simulation to MSAE

Existing Data Involving Downwash Wake Reduction (12/05)

For the V-22 Osprey”

Investigation of Dielectrics for use in Quarter Wave (8/06)

Coaxial Cavity Resonators”
Williams, Kenneth – “A Rotational Arm Connection Point MSME

Design for a C-130 Aircraft Standardized Sensor Platform” (8/06)

C-130 Aircraft Sensor Platform” (8/06)

Two-Dimensional Inertial Gas Separator” (12/06)

Central Vision Compensation Techniques” (12/06)

Effect for Use as a Design Tool” (8/07)

Development for an Aircraft Sensor Deployment System” (5/08)

Actuated Circulation Control Blowing Slots for (5/08)

Rotorcraft Use”

Pertl, Franz A. – “Prospects of Lean Ignition with the Quarter Ph.D.

Wave Coaxial Cavity Igniter” (5/08)
Harman, John E. – “Feasibility and Optimum Design Study of a MSAE

Low Speed Wind Turbine Rotor System for Underground (5/08)

Communication Power”
Hamrick, Todd – “Characterization of Key Performance MSME

Parameters in Dye Sensitized Solar Cells Using a Designed (8/08)

Experiment”
Panther, Chad C. – “Parasitic Drag Analysis of a High Inertia MSAE

Flywheel Rotating in an Enclosure” (8/08)

For a Slotted Airfoil in Ground Effect” (8/08)

on Stall Angles of a 10:1 Elliptical Airfoil” (8/08)

Composed of Two Separated Surfaces” (12/08)

Tunnel for the Study of a Glider in Ground Effect” (12/08)

Asymmetry Due to Reverse Flow” (5/09)

Ignition Systems Testing” (12/09)

Analysis for a Circulation Control Augmented Vertical (12/09)

Axis Wind Turbine”
Pertl, Emily – “Passive Thermal Management of Solar Heat Flux Ph.D.

Through Building Roof Structures” (8/10)

Matching Scheme for a Circulation Controlled Vertical Axis (8/10)

Wind Turbine”
Hard, Steven L.– “Lift Augmentation Using a NACA 0018 Airfoil MSME

with Circulation Control” (12/10)

Hubbell, Meagan L. – “Planform Characterization of a High Ph.D.

Lift, Low Speed, Ground Effect Glider” (5/12)

Passive Circulation Control Pressurization System” (12/12)

Projectile Location System” (12/12)

(5/15)
Graham, Henry – “Inactive” Ph.D.

(5/15)
Panther, Chad C. – “Untitled Ph.D.

(5/15)
Spencer, Mike – “Untitled Ph.D.

(8/15)
Chambers, Justin – “Untitled” Ph.D.

(5/16)
Maddineni, Yashaznth Chowdary – “Untitled” MSME

(5/15)
Arnold, Allison – “Untitled” MSME

(8/15)
Hunsucker, James – “Untitled” MSME

(8/15)