INFI-NET to Computer Interface (INICI01/03) instructionfor tables listing the function of each dipswitch. Refer to Table for the document number. MODULE INSTALLATION The product instruction explains how to prepare the module mounting unit for these modules and the cable connections between the modules. After preparing the module mounting unit. Completely install the INICT03, INNIS01 and IMMPI01 modules, and the required termination units and cables. 2. Install the pin ribbon cable from the connector on the SCSI module faceplate to the connector on the IMMPI01 face- plate (Figure 3-4 ). SYSTEM START-UP The INOSM01 Open Systems Manager is shipped with the server software installed. No keyboard or monitor is needed for the INESM01 server module to boot. The open systems manager will startup automatically upon power up. After the open systems manager boots, refer to the INFI-NET Ethernet Table 3-4. INICT03 Dipswitch Settings
