Contactless Interface
|
D.1
|
What is the contactless Communication Protocol Specification version supported?
|
|
D.2
|
Contactless Protocol Type supported by the Secure Element (i.e. ISO/IEC 14443 Type A or Type B or both)
|
|
D.3
|
Frame Waiting time Integer (FWI) value
|
(Must be < 14, Recommended Value 7)
|
D.4
|
Is Card IDentifier (CID) Supported?
|
|
D.5
|
Can the device operate with CID disabled?
|
|
D.6
|
Is Node ADdress (NAD) Supported?
|
|
D.7
|
Are Frame Waiting Time (FWT) Extension Requests Used?
|
|
Type A Parameters(See response to D.2)
|
D.8
|
Answer To reQuest, Type A (ATQA) value
|
|
D.9
|
Unique IDentifier (UID) size (single, double or triple)
|
|
D.10
|
Select AcKnowledge (SAK) value
|
|
D.11
|
Last SAK for double and triple UID size
|
|
D.12
|
Answer To Select (ATS) value
|
|
D.13
|
Frame Size for proximity Card Integer (FSCI) value
|
|
D.14
|
Start-up Frame Guard Time Integer (SFGI) value
|
|
D.15
|
Historical Bytes value (if any)
|
|
D.16
|
Is chaining Supported?
|
|
D.16.1
|
If Yes is Block Size Fixed?
|
|
Type B Parameters(See response to D.2)
|
D.17
|
Answer To reQuest, Type B (ATQB) value
|
|
D.18
|
Application Data Field value
|
|
D.19
|
Max Frame Size value
|
|
D.20
|
Application Data Coding (ADC) value (2 bits)
|
|
D.21
|
Is the PICC selection command, Type B (ATTRIB) Response value defined in the UICC?
|
|
D.22
|
ATTRIB Response value (if defined in UICC)
|
|
D.23
|
HaLT command, Type B (HLTB) Response value
|
|
D.24
|
Higher Layer Command/Response Feature
|
(If yes please complete D.24.1 – D.24.2)
|
D.24.1
|
Specify command supported by Card?
|
|
D.24.2
|
Specify response sent by Card?
|
|
D.25
|
Is chaining supported?
|
|
D.25.1
|
If Yes is Block Size Fixed?
|
|
MIFARE parameters
|
D.26
|
Does the chip support MIFARE?
(In case of Emulated please list the MiFare applets in section F)
|
|
D.27
|
List all the configurations of MIFARE supported?
(e.g. MiFare Classic 1K/4K and/or MiFare DESFIRE 4K/8K.)
|
|