Purpose of this form


Architecture Specific Attributes



Download 282.78 Kb.
Page5/5
Date28.01.2017
Size282.78 Kb.
#9201
1   2   3   4   5

Architecture Specific Attributes


SWP Specific Information(If product supports SWP)

E.1

Single-Wire Protocol(SWP) Spec version (of ETSI TS 102.613)

     

E.2

Host Controller Interface(HCI) Spec version (of ETSI TS 102.622)

     

E.3

SWP Data Rates Supported

     

E.4

Supported JSRs

 JSR 118  JSR 177

 JSR 188  JSR 257



E.5

Contactless Protocol Type configurable in SE or Payment Application(s) (i.e. ISO/IEC 14443 Type A or Type B or both):



E.6

SWP/HCI protocol verified with GP SWP/HCI Test Suite



Contactless Technology Information

E.7

NFC controller vendor name

     

E.8

NFC controller name and version number

     

E.9

NFC controller firmware name and version

     

UICC Specific Information

E.10

Target Market/Operator

     

E.11

Is Bearer Independent Protocol (BIP) supported?



E.12

Is Smart Card Webserver supported?



Device Antenna Specific Information

E.13

Antenna location in device



E.14

Antenna Vendor Name if different from Company Legal Name (A.1)

(If different please complete E.15.1 – E.15.4)



     

E.15.1

Antenna Vendor Address

     

E.15.2

Antenna Vendor Contact Name

     

E.15.3

Antenna Vendor Contact Email

     

E.15.4

Antenna Vendor Contact Telephone Number

     

E.16

Antenna Manufacturing Facility City and Country

      -      

E.17

Please complete the measurements (in mm) for the antenna size and location as show in the example diagram below:

a =       b =       c =      

d =       x =       y =      






x

y

c



d

a

b



SE

x

y



c

d

a



b

UICC Type:

x

y

c



d

a

b



microSD Type:


Flex Type:

Handsets selected for FE SE testing


Handsets information (To be filled in after joint decision with MasterCard of selected handsets)

x

y



d

c

b



a
For each handset selected jointly with MasterCard to be used for testing of the Fully Encapsulated Secure Element device, please fill in the information below.

Handset #1 (Primary Handset)

F.1


Handset #1 vendor and commercial name

      -      

F.2

If an additional component is required to enhance the performance of the antenna (booster...) please enter vendor and component technical name and version.



      -      

F.3


Please complete the measurements (in mm) for the antenna size and location as well as the optimum performance zone as show in the example diagram:

a =       b =       c =      

d =       x =       y =      

Handset #2

F.4


Handset #2 vendor and commercial name

      -      

F.5

If an additional component is required to enhance the performance of the antenna (booster...) please enter vendor and component technical name and version.



      -      

F.6


Please complete the measurements (in mm) for the antenna size and location as well as the optimum performance zone as show in the example diagram:

a =       b =       c =      

d =       x =       y =      

Handset #3

F.7


Handset #3 vendor and commercial name

      -      

F.8

If an additional component is required to enhance the performance of the antenna (booster...) please enter vendor and component technical name and version.



      -      

F.9


Please complete the measurements (in mm) for the antenna size and location as well as the optimum performance zone as show in the example diagram:

a =       b =       c =      

d =       x =       y =      

Handset #4

F.10


Handset #4 vendor and commercial name

      -      

F.11

If an additional component is required to enhance the performance of the antenna (booster...) please enter vendor and component technical name and version.



      -      

F.12


Please complete the measurements (in mm) for the antenna size and location as well as the optimum performance zone as show in the example diagram:

a =       b =       c =      

d =       x =       y =      

Handset #5

F.13


Handset #5 vendor and commercial name

      -      

F.14

If an additional component is required to enhance the performance of the antenna (booster...) please enter vendor and component technical name and version.



      -      

F.15


Please complete the measurements (in mm) for the antenna size and location as well as the optimum performance zone as show in the example diagram:

a =       b =       c =      



d =       x =       y =      

Additional Applications


Additional Applications

G.1

Are there applications available on this card other than the payment application under test?



G.2

Can several EMV payment applications (the application that is submitted to the type approval) be personalized on the card (multi-instantiation of Mobile MasterCard PayPass M/Chip applet for instance)?



G.3

Please list all configurations (combination of applications) you would like to market. For each of them complementary tests may be run. The test report will repeat this list

     

If "Yes" please fill the following table taking into account the following instruction:

  • Application Name: The technical name of the application shall be provided here. It could be either a MasterCard application or a non-MasterCard application.

  • AID: The Application Identifier shall be provided here. If the AIDs are not yet defined, the value to be entered is a plausible value that will be used during the approval session.

  • Short Description: A brief description of the application shall be provided here.

  • Does this application share the PIN and/or other Data with M/Chip?

  • Does this application act as a filter? - An application is considered as a filter if it intercepts all incoming or outgoing commands (APDU or R-APDU) even if it just forwards the command or (and) the response without modifying it (them).

  • Is this application a default application? - A default application is an application implicitly selected during the card initialization (power on). Such an application may interfere during the EMV selection mechanism




Application Name

Application Version

AID

Short Description

Selectable over contactless interface

Does this application share the PIN and/or other Data with M/Chip?

Does this application act as a filter?

Is this application a default application?

G.4      

     

     

     









G.5      

     

     

     









G.6      

     

     

     









G.7      

     

     

     









G.8      

     

     

     









G.9      

     

     

     









G.10      

     

     

     









G.11      

     

     

     









G.12      

     

     

     









G.13      

     

     

     









V1.2.0

MOBILE MASTERCARD PAYPASS FULLY ENCAPSULATED SECURE ELEMENT REGISTRATION FORM TEMPLATE v1.6


Download 282.78 Kb.

Share with your friends:
1   2   3   4   5




The database is protected by copyright ©ininet.org 2024
send message

    Main page