Request For Proposals # mt-e911a 2012



Download 297.8 Kb.
Page13/17
Date19.10.2016
Size297.8 Kb.
#3540
TypeRequest
1   ...   9   10   11   12   13   14   15   16   17

9.6Power Requirements


Please indicate the solution's compliance with these standard power requirements.


NENA Standard 04-001

Meets

Partially Meets

Does Not Meet

The solution uses standard 115C or 220V Commercial Power and standard power connectors

 

 

 

The solution offers a reserve power capability that will provide at least 15 minutes of full functionality for all primary solution components

 

 

 

Emergency Power

 

 

 

The solution offers Transient Voltage Surge Suppression (TVSS) for commercial power and trunk line signals

 

 

 

For each response in the table above, please provide a complete explanation of responses that indicate the proposed solution provides only partial standard support, or does not support an identified standard at all.
Response:

9.7Physical Operating Characteristics


Please indicate the solution's compliance with these operating specifications.


NENA Standard 04-001

Meets

Partially Meets

Does Not Meet

The solution is designed to remain fully operational in environments where the temperature ranges between 40°F and 100°F, and the relative humidity is between 20% and 80%.

 

 

 

The solution is designed to operate at altitudes between 200 ft below sea level and 10,000 feet above sea level.

 

 

 

The solution is designed to operate in a standard electrical environment, and can withstand normal levels of inductive interference, electromagnetic interference, and static discharges.

 

 

 

The solution is designed to operate through momentary disruptions in telephone network continuity.

 

 

 

The solution does not present any safety hazards to the operator from voltage leaks, mechanical design flaws, construction hazards, surface temperature, or the emission of audible noise or toxic substances.

 

 

 

The solution is space-efficient.

 

 

 

The solution is prewired and pre-programmed










Interconnecting cabling between components has industry-standard connectors at both ends










Call-taker positions can operate at a wired distance of as much as 150 feet from the system control room.










The solution includes a detailed specification for the provision of electrical grounding requirements










All attendant equipment is electrically isolated from the common equipment to eliminate ground loops and/or ground potential differences.

 

 

 


For each response in the table above, please provide a complete explanation of responses that indicate the proposed solution provides only partial standard support, or does not support an identified standard at all.
Response:



Download 297.8 Kb.

Share with your friends:
1   ...   9   10   11   12   13   14   15   16   17




The database is protected by copyright ©ininet.org 2024
send message

    Main page