Request for Proposals ("erfp")
Normal Bus Operation Controls
Download 0.55 Mb.
|
- Navigate this page:
- Passenger Comfort Controls
- Dash Mounted Telltale Lights
- WINDSHIELD WIPERS AND WASHERS
- USSC - 9100ALX DRIVER’S SEAT
- CENTER DOOR VIEWING CONVEX MIRRORS
Normal Bus Operation ControlsEngine start switch Transmission selector Door control Turn signal Dash heater / defroster Windshield wiper Master run switch Parking brake High beam Hazard lights Kneeling ramp control (optional) Instrument lighting control
ABS diagnostic test Stop engine override Drivers fan (optional) Exterior mirror heater/remote controls (optional) Dash air conditioning (optional) Fire suppression (optional) Engine diagnostic test connectors Stop request chime (optional) Fast Idle P.A. (optional) Diagnostic light panel test Destination Sign control (optional)
Climate control (temperature select) Interior HVAC (blower) Interior lights (passenger compartment)
Accelerator pedal Brake pedal Turn signals High beam
Tachometer Speedometer Fuel gauge Oil pressure gauge Coolant temperature gauge Voltmeter Dual air gauge
Low oil pressure Coolant temperature Lift deployed Alternator fail Engine shutdown Park brake High beam Air conditioning inoperative Low air pressure
Two speed electric wipers shall be provided, one (1) on each side with a single control.
A USSC, model 9100 ALX air suspension driver’s seat shall be provided. The seat shall feature six-way adjustments with air actuated lower lumber support. The driver seat shalll be covered in black transit cloth.
The bus shall accommodate 36 seated passengers, with the flexibility to accommodate two ADA compliant wheelchair positions. A total of six aisle facing passenger seats may be flipped up when both wheelchair tie downs are in use. Freedman Seating - CitiSeats with padded Level 5 cloth inserts shall be provided. The seating plan/floor plan shall incorporate perimeter seating on the forward half of the bus, and forward facing seating on the rear half of the bus . All forward facing double seats are to incorporate seat back mounted grab handles. The bus shall also accommodate 36 standee passengers for a total passenger capacity of 72, plus the driver. A weight calculation confirming that the front and rear GAWR as well as overall GVWR are not exceeded with the aforementioned passenger load is required with the Supplier’s proposal.
Fully adjustable 15" x 8" overall, two (2) part mirrors shall be supplied. The upper section shall utilize a 8-1/2” section of flat glass. The lower section shall be 5-1/2” convex adjustable diminishing glass. The mirrors shall be installed with quick mount disconnects, and shall be supported by rigid adjustable black powder coated arms. The aforementioned exterior mirrors shall include heated and remote controlled features.
Driver's passenger viewing 8" x 15" convex fully adjustable rearview mirror shall be mounted in easy reach.
A 12" diameter convex mirror shall be installed behind and above the doorway. This mirror shall be viewed through a 6” diameter convex mirror mounted in the upper front interior corner of the bus.
All windows shall meet State and Federal Safety Regulations. Windshield shall be AS 1. Driver's side windows shall be AS 2, and passenger windows shall be AS 3 in quality.
Passenger compartment heating and air conditioning systems shall be as specified hereafter:
|