Service equipment battery test software battery protection



Download 2.86 Mb.
Page3/17
Date09.06.2018
Size2.86 Mb.
#54207
1   2   3   4   5   6   7   8   9   ...   17
Figure 1. GUBT25/50A12V, GUBT30/100A12V and PR1500A12V in Battery Plant in Sombor, “Black Horse”

GAUS HIGH RATE DISCHARGE TESTER PR1000A12V/PR1500A12V


The Gaus High Rate Discharge Tester is particularly designed for testing the cranking performance (cold and warm cranking) of automotive batteries. The PR1000A(1500A)12V performs discharge tests with selectable current values in accordance with all national and international test standards.



The PR1000A(1500A)12V contains one discharge circuit with integrated microcomputer interface. Central control by means of a host computer of the AT type with GBTS1.05 Software (Host Computer Type).

Guaranteed operation of the discharge circuit also in case of failure or interruption of the host computer by down-loading the complete test program into the microcomputer interface.

The PR1000A(1500A)12V with GBTS1.05 have been designed as an integrated system, combining power conversion, circuit control, computer control, data recording and data reporting. As a result, this system meets most battery testing needs: high reliability, complete functionality, accuracy, ease of data recording, troubleshooting, numerous data presentation formats, and easy maintenance. In this way it provides increased laboratory efficiency and accuracy.

Additional ratings and options are continually added to the product line. Furthermore, “GAUS StS” is also happy to work with customers to provide special customisation options where needed.

Operating Simplicity

Test initiation and control are via the mouse or keyboard. After a program has been selected and the battery connected, simply depress the START key to initiate the test sequence. While discharging, the GBTS1.05 will display the status of the test and the test results in graphical or columnar form on the real time basis. It will show the mode of operation (ready, connect battery, running, stopped, paused, error…) the program number, the step number and the test parameters (amperes, volts, elapsed time...). The test may be stopped and restarted at any point in the discharge.



Technical Data:





- Cold cranking test 10 – 1000A (1500 A)

  • Digital voltmeter 0 – 19,99 V

  • Digital ampermeter 0 –999A (1999A)

  • Power supply 220V, 50 Hz, 300W




Accuracy:

within the range 1 – 100% Inom

12bit dual slope A/D conversion


0,5 % of set value

Control System:

Transistors with loads

Control Characteristics:

Constant current

Option: constant power, resistance, voltage

(Price on request)


Control Elements:

Main switch, control unit switch, start and

stop taster for controlling the power supply unit (charger for backup battery)



Displays:

LED’s for power (green-charger ON, red-charger OFF), 12 red led’s for active transistor-resistance groups during discharge,

digital instruments for current and voltage (optional)



Programmable Regulating Parameters:

Current, Power and Resistance

Programmable Termination Conditions:

Discharge time, final voltage, discharge current, Ah discharged, kWh discharged

Programmable Functions:

Discharge, Pause, Cycles

Programme Length:

max. 1000 lines

Programme Storage Capacity:

operation with host computer



Limited by host computer storage capacity

Display/Output of Measuring Values:

During test permanently on the video

terminal. Printout of start time and date on the measuring report, comment, parameters, voltage in t=0, 30s, final t...



Analogue Channels:

Two with fixed allocation for voltage and current,

one for temperature (optional) and six for cells voltage (optional)




Price:
PR1000A12V...............................................................................................10500 US$

PR1500A12V...............................................................................................14800 US$


Delivery Time: three months

Warranty Period: 1 (one) year

Options:


1. additional equipment for measuring temperature (3 measuring per second, temperature range from -50 to +150‰C with monitoring)..........................250US$;

2. measuring of voltage in all six cells of battery, during test with adequate software (2 measuring per 1s for each cell)..................................................1650US$.


GAUS HIGH RATE DISCHARGE TESTER PR2000A12V


Continuous duty, single cell operation

The Gaus High Rate Discharge Tester is particularly designed for testing the cranking performance (cold and warm cranking) of automotive batteries. The PR2000A12V performs discharge tests with selectable current values in accordance with all national and international test standards.

The PR2000A12V contains one discharge circuit with integrated microcomputer interface. Central control by means of a host computer of the AT type with GBTS1.06 Software (Host Computer Type).

Guaranteed operation of the discharge circuit also in case of failure or interruption of the host computer by downloading the complete test program into the microcomputer interface, or in the case of mains power supply failure.

The PR2000A12V with GBTS1.06 have been designed as an integrated system, combining power conversion, circuit control, computer control, data recording and data reporting. As a result, this system meets most battery testing needs: high reliability, complete functionality, accuracy, ease of data recording, troubleshooting, numerous data presentation formats, and easy maintenance. In this way it provides increased laboratory efficiency and accuracy.

Additional ratings and options are continually added to the product line. Furthermore, “GAUS StS” is also happy to work with customers to provide special customisation options where needed.

Operating Simplicity

Test initiation and control are via the mouse or keyboard. After a program has been selected and the battery connected, simply depress the START key to initiate the test sequence. While discharging, the GBTS1.06 will display the status of the test and the test results in graphical or columnar form on the real time basis. It will show the mode of operation (ready, connect battery, running, stopped, paused, error…) the program number, the step number and the test parameters (amperes, volts, elapsed time...). The test may be stopped and restarted at any point in the discharge.



Technical Data:





  • Discharge voltage range 0 – 15 V

  • Single cell operation

  • Continuous duty

  • Discharge current range

- Cold cranking test 10 – 2000A

  • Digital voltmeter 0 – 19,99 V

  • Digital ampermeter 0 –1999A

  • Power supply 3x380V, 50 Hz




Accuracy:

within the range 1 – 100% Inom

12bit dual slope A/D conversion


0,5 % of set value

Control System:

IGBT transistors

Control Characteristics:

Constant current

Option: constant power, resistance, voltage

(Price on request)


Control Elements:

Main switch, control unit switch, start and

stop taster for controlling the power supply unit (charger for backup battery)



Displays:

LED’s for power (green-charger ON, red-charger OFF), 12 red led’s for active transistor-resistance groups during discharge,

digital instruments for current and voltage (optional)



Programmable Regulating Parameters:

Current, Power and Resistance

Programmable Termination Conditions:

Discharge time, final voltage, discharge current, Ah discharged, kWh discharged

Programmable Functions:

Discharge, Pause, Cycles

Program Length:

max. 1000 lines

Program Storage Capacity:

operation with host computer



Limited by host computer storage capacity

Display/Output of Measuring Values:

During test permanently on the video

terminal. Printout of start time and date on the measuring report, comment, parameters, voltage in t=0, 30s, final t...



Analogue Channels:

Two with fixed allocation for voltage and current,

one for temperature (optional) and six for cells voltage (optional)




Price:
PR2000A12V (continuous duty, single cell operation).......................................23000 US$
Delivery Time: three months

Warranty Period: 1 (one) year

Options:


1. additional equipment for measuring temperature (3 measuring per second, temperature range from -50 to +150‰C with monitoring)..........................250US$;

2. measuring of voltage in all six cells of battery, during test with adequate software (2 measuring per 1s for each cell)..................................................1650US$.





Download 2.86 Mb.

Share with your friends:
1   2   3   4   5   6   7   8   9   ...   17




The database is protected by copyright ©ininet.org 2024
send message

    Main page