Sip firmware Release 1 for ip phone 1140e administration

34
Configure the provisioning server
IM_NOTIFY
DEF_DISPLAY_IM
DEFAULT_CFWD_NOTIFY
FORCE_CFWD_NOTIFY
QoS and ToS
commands
DSCP_CONTROL
802.1P_CONTROL
DSCP_MEDIA
802.1P_MEDIA
DSCP_DATA
802.1P_DATA
Tone configuration
commands
DIAL_TONE
RINGING_TONE
BUSY_TONE
FASTBUSY_TONE
CONGESTION_TONE
NAT configuration
commands
NAT_SIGNALLING
NAT_MEDIA
NAT_TTL
STUN_SERVER_IP1
STUN_SERVER_IP2
STUN_SERVER_PORT1
STUN_SERVER_PORT2
Voice Quality
Monitoring (VQMon)
configuration
commands
VQMON_PUBLISH
VQMON_PUBLISH_IP
LISTENING_R_ENABLE
LISTENING_R_WARN
LISTENING_R_EXCE
PACKET_LOSS_ENABLE
PACKET_LOSS_WARN
PACKET_LOSS_EXCE
JITTER_ENABLE
JITTER_WARN
JITTER_EXCE
DELAY_ENABLE
DELAY_WARN
DELAY_EXCE
SESSION_RPT_EN
SESSION_RPT_INT
System commands
ADMIN_PASSWORD
Device configuration commands
CAUTION
The syntax of the device configuration file is case sensitive.
Verify that the commands entered follow the case defined in this document.
Server and network configuration commands
•
SIP_DOMAIN[x] [domain_name] preconfigures the proxy domain name for all servers. The same configuration can be done through the domain configuration menu on the IP Phone E x - the number of the SIP domain number from 1 to SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

Create the device configuration file on the provisioning server
35
— domain_name - the proxy domain name for all servers.
Note: SIP_DOMAIN[x] is provisioned after user logout.
•
SERVER_IP[x]_[y]_ip_address] configures the primary and secondary
IP address for each domain, two proxies for each domain x - the domain number from 1 to 5.
— y - the corresponding primary and secondary IP addresses. y=1
indicates the primary address and y indicates the secondary address ip_address - the IP address of the SIP proxy server.
•
SERVER_PORT[x]_[y] [port_number] configures the signaling ports for each proxy x - the domain number y - the corresponding primary and secondary IP addresses. y=1
indicates the primary address and y indicates the secondary address port_number - the SIP proxy signaling port (default is 5060).
•
SERVER_RETRIES[x] [number_of_retries] confirms the number of retries for each domain. The default number of retries is 3.
— x - the domain number from 1 to 5.
— number_of_retries - the number of retry attempts to connect to the proxy server.

Download 1.47 Mb.

Share with your friends: