Sip firmware Release 1 for ip phone 1140e administration

Document Outline

• New in this release
  • Other changes
    • Revision history
• How to Get Help
  • Getting Help from the Nortel Website li
  • Getting Help over the telephone from a Nortel Solutions Center
  • Getting Help from a specialist using an Express Routing Code
  • Getting Help through a Nortel distributor or reseller
• Introduction to this guide
  • Subject
  • Intended audience
  • Acronyms
  • Related publications
• Overview
  • Introduction
    • SIP overview
    • IP Phone E with SIP Firmware
    • Related documentation
    • Installation overview
  • Supported SIP proxy servers
• Before installation
  • Introduction
  • Preinstallation
• Configure the provisioning server
  • How provisioning works
  • Download the SIP Firmware to the provisioning server
  • Create the SIP provisioning file on the provisioning server
  • Create the device configuration file on the provisioning server
    • Device configuration commands
  • Create the Dialing Plan file on the provisioning server
    • Dialing function description
  • Downloadable WAV files
• Configure the DHCP server
  • Partial DHCP mode
  • Full DHCP mode
    • Configure the DHCP server to support Full DHCP mode
    • DHCP VLAN Auto Discovery
• Physically install the IP Phone 1140E
• Upgrade and convert the IP Phone E firmware
  • Introduction
  • Upgrade the SIP Firmware on the IP Phone E
    • Download the SIP Firmware to the provisioning server
    • Modify the SIP provisioning file
  • Upgrade to the minimum UNIStim Firmware
    • Identify the current version of UNIStim Firmware
    • Upgrade UNIStim Firmware to the minimum required UNIStim Firmware
  • Convert UNIStim Firmware to SIP Firmware on the IP Phone 1140E
• Voice Quality Monitoring
  • Feature overview
  • VQMon set-up
  • Server set-up
  • How VQMon works
• Device Settings on the IP Phone E with SIP Firmware
  • Introduction
    • 802.1x (EAP) Port-based network access control
  • Configure the device settings
• Multiple Appearance Directory Number (Single Call Arrangement)
  • Vertical services
    • Privacy
  • Feature dependencies and restrictions
• Emergency 911 - Operator control of disconnect
  • Overview
  • Location information
  • Dialing plan configuration
  • Characteristics of E calls
• IP Phone E restrictions
  • Service package restrictions
  • Distinctive Ringing feature
• NAT firewall traversal
• Three-port switch and VLAN functionality
  • System overview
• SIP messages supported by the IP Phone E
  • SIP methods
  • SIP responses
    • 1xx Response--Information Responses
    • 2xx Response--Successful responses
    • 3xx Response--Redirection responses
    • 4xx Response--Request failure responses
    • 5xx Response--Server failure responses
    • 6xx Response--Global responses
  • Default error handling
  • SIP header fields
  • Session description protocol usage
  • SDP and Call Hold
  • Transport layer protocols
  • SIP security authentication
  • SIP DTMF Digit transport
  • Supported subscriptions
  • Supported instant messaging
• Maintenance and troubleshooting
  • Convert SIP Firmware to UNIStim Firmware
  • IP Phone E diagnostics
• Index
• Figures
  • Figure 1 IP Phone E with SIP Firmware
  • Figure 2 Installation of IP Phone E with SIP Firmware, page 1 of 2
  • Figure 3 Installation of IP Phone E with SIP Firmware, page 2 of 2
  • Figure 4 Sample provisioning file
  • Figure 5 Sample device configuration file
  • Figure 6 Sample dialing plan
  • Figure 7 Sample dialing plan declarations section
  • Figure 8 Sample dialing plan variable definitions
  • Figure 9 Sample dialing plan digit map section
  • Figure 10 DRegex rules
  • Figure 11 IP Phone E connections
  • Figure 12
  • Figure 13
  • Figure 14
  • Figure 15 Voice-VLAN and Data VLAN
• Tables
  • Table 1 Acronyms used
  • Table 2
  • Table 3 IP Phone E box contents
  • Table 4 1100 series phones separably orderable parts
  • Table 5 Provisioning file supported sections
  • Table 6 Device configuration commands
  • Table 7 Timezone offset
  • Table 8 Characteristics of Partial DHCP mode and Full DHCP mode
  • Table 9 DHCP options in Partial DHCP mode
  • Table 10 DHCP options in Full DHCP mode
  • Table 11 Local Tools menu
  • Table 12 Using the Navigation key cluster to navigate in the Local Tools menu
  • Table 13 Sample 1140e.cfg provisioning file
  • Table 14 Local Tools menu
  • Table 15 Sample 1140e.cfg configuration file
  • Table 16
  • Table 17 Parameters in Device Settings menu
  • Table 18 Telephony Port (incoming)
  • Table 19 VLAN Filter
  • Table 20 PC Port (incoming traffic from PC)
  • Table 21 PC Port (outgoing)
  • Table 22 Network menu
  • Table 23 Using the Navigation key cluster to navigate in the Network menu
  • Table 24 Using the Navigation key cluster to navigate in the Device Settings menu
  • Table 25 EAP configuration
  • Table 26 DHCP configuration
  • Table 27 SET IP configuration
  • Table 28 Net Mask and Gateway configuration
  • Table 29 DNS configuration
  • Table 30 VLAN Filter configuration
  • Table 31 Disable PC Port configuration
  • Table 32 Data VLAN Configuration in Device Settings menu
  • Table 33 PC-Port Untag-All Configuration in Device Settings menu
  • Table 34 Ethernet port mode configuration
  • Table 35 Server URL configuration
  • Table 36 Protocol configuration
  • Table 37 Device ID configuration
  • Table 38 Password configuration
  • Table 39 PVQMon IP configuration
  • Table 40 NAT Signal configuration
  • Table 41 NAT media configuration
  • Table 42 NAT TTL configuration
  • Table 43 STUNS IP configuration
  • Table 44 STUNS IP configuration
  • Table 45 Port functions on the three-port switch when VLAN is enabled
  • Table 46
  • Table 47
  • Table 48
  • Table 49
  • Table 50
  • Table 51
  • Table 52
  • Table 53
  • Table 54
  • Table 55
  • Table 56
  • Table 57
  • Table 58
  • Table 59
• Procedures
  • Procedure 1 Installation overview
  • Procedure 2 Preinstallation checklist
  • Procedure 3 Downloading SIP Firmware for IP Phone E from the Nortel Website li
  • Procedure 4 Installing the IP Phone 1140E
  • Procedure 5 Downloading SIP Firmware for the IP Phone E from the Nortel Website li
  • Procedure 6 Modifying the SIP provisioning file
  • Procedure 7 Checking the UNIStim Firmware version on anew IP Phone 1140E
  • Procedure 8 Checking the UNIStim Firmware version on an IP Phone E already in use
  • Procedure 9 Configuring the TFTP server
  • Procedure 10 Downloading UNIStim Firmware automatically through TFTP on bootup
  • Procedure 11 Downloading SIP Firmware for the IP Phone E from the Nortel Website li
  • Procedure 12 Converting UNIStim Firmware to SIP Firmware using TFTP
  • Procedure 13 Provisioning the Device Settings parameters
  • Procedure 14 Reloading UNIStim Firmware