Sip firmware Release 1 for ip phone 1140e administration

116
SIP messages supported by the IP Phone 1140E
Alert-Info
Yes
Allow
Yes
Allow-Events
Yes
Authentication-Info
Yes
Authorization
Yes
Call-Id
Yes
Call-Info
Yes
Contact
Yes
Content-Disposition
Yes
Content-Encoding
Yes
Content-Length
Yes
Content-Type
Yes
Cseq
Yes
Date
Yes
Expires
Yes
Error-Info
Yes
Max-Forwards
Yes
Mime-Version
Yes
Organization
Yes
P-Access-Network-Info
Yes
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

SIP header fields
117
P-Asserted-Identity
Yes
P-Associated-URI
Yes
P-Called-Party-ID
Yes
P-Charging-Function-Addresses
Yes
P-Charging-Vector
Yes
P-Media-Authorization
Yes
P-Preferred-Identity
Yes
P-Visited-Network-ID
Yes
Path
Yes
Priority
Yes
Privacy
Yes
Proxy-Authenticate
Yes
Proxy-Require
Yes
RAck
Yes
Reason
Yes
Record-Route
Yes
Refer-To
Yes
Referred-By
Yes
Remote-Party-ID
Yes
Replaces
Yes
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

118
SIP messages supported by the IP Phone 1140E
Reply-To
Yes
Require
Yes
Resource-Priority
Yes
Retry-After
Yes
Route
Yes
RSeq
Yes
Server
Yes
Service-Route
Yes
Subject
Yes
Supported
Yes
Timestamp
Yes
To
Yes
Unsupported
Yes
User-Agent
Yes
Via
Yes
Warning
Yes
WWW-Authenticate
Yes
Session description protocol usage
SDP Headers
Supported?
v--Protocol version
Yes
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

SIP security authentication
119
o--Owner or creator and session identifier
Yes s--Session name
Yes t--Time description
Yes c--Connection information
Yes m--Media name and transport address
Yes a--Media attribute lines
Yes
SDP and Call Hold
The IP Phone E can support sending and receiving of hold using the method specified by RFC and RFC3261/3264.
Transport layer protocols
Protocol
Supported?
Unicast UDP
Yes
Multicast UDP
No
TCP
No
SIP security authentication
Authentication
Supported?
Comments
Digest Authentication
Yes
Proxy-to-User Authentication
Yes
User-to-User Authentication
No
The IP Phone E responds to abut never challenges incoming requests with a 401
response.
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

120
SIP messages supported by the IP Phone 1140E
S/MIME
No
AKA
No
SIP DTMF Digit transport
Transport type
Supported?
RFC 2833
Yes
In-band tones
Yes
Out-of-band tones
Yes (vnd.nortelnetworks.digits)
Supported subscriptions
Subscription type
Supported
Nortel Call Server specific
address-book
Yes
Yes call-park
Yes
Yes dialog
Yes
Yes presence
Yes
Yes message-summary
Yes
No ua-profile
Partial
Yes service-package
Yes
Yes network-redirection-reminder
Yes
Yes
Supported instant messaging
Message type
Supported?
plain text
Yes
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

Supported instant messaging
121
Nortel unencrypted
Yes
Nortel encrypted
Yes
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

122
SIP messages supported by the IP Phone 1140E
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

123
Maintenance and troubleshooting
Convert SIP Firmware to UNIStim Firmware
The IP Phone E can be ordered with UNIStim Firmware installed or with SIP Firmware installed. If you have an IP Phone E with UNIStim
Firmware, and you convert the firmware from UNIStim to SIP, the UNIStim
Firmware is overwritten. To convert an IP Phone E from SIP Firmware to UNIStim Firmware, a firmware reload is required.
Procedure 14
Reloading UNIStim Firmware
Step
Action
1
Determine the appropriate UNIStim version to match the hardware release number of your IP Phone 1140E.
There are different versions of UNIStim Firmware available for download. Which version you choose depends on the hardware release number of your particular IP Phone 1140E.
If the hardware release number of your IP Phone E is among the following hardware release numbers, download UNIStim
Firmware version release Cor higher (the hardware release number is the Product Engineering Code [PEC] followed by the release number):

Download 1.47 Mb.

Share with your friends: