Sip firmware Release 1 for ip phone 1140e administration

Note: The SIP URI is used to subscribe for MADN support for CS2000.•

Download 1.47 Mb.

View original pdf

Page	27/76
Date	14.08.2023
Size	1.47 Mb.
	#61855

1 ... 23 24 25 26 27 28 29 30 ... 76

NN43113-300 02.05 1140E Adm

Note: The SIP URI is used to subscribe for MADN support for CS
2000.
•
DEFAULT_CFWD_NOTIFY YES | NO is used to configure the "ring splash" which occurs when either local call forwarding (MCS 5100) or network-based call forwarding have been enabled (CS 2000, CS If this configuration value is enabled, the IP Phone E plays an abbreviated ringtone to remind the user that a call has been forwarded.
This configuration value only effects users when their user profile is first created, unless the FORCE_CFWD_NOTIFY flag is also used.
The default setting is NO YES - a brief ring splash plays when a call is forwarded NO - the ring splash is not be played.
•
FORCE_CFWD_NOTIFY YES | NO ] allows the administrator to force the behavior of the DEFAULT_CFWD_NOTIFY value on all users who login to the IP Phone E. The default setting is NO YES - the DEFAULT_CFWD_NOTIFY configuration value is forced into effect for the user NO - the configuration value is not be forced into effect for the user.
QoS and ToS commands
•
DSCP_CONTROL x is a value entered in decimal format between -and 63. If the value is -1, the DSCP value is picked up by the Service
Package. The default value is 40.
— x - a value from -1 to 63 indicating the DSCP value.
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

Create the device configuration file on the provisioning server
45
•
802.1P_CONTROL x is a value entered in decimal format between -and 7 representing the P value in the SIP signaling packets. If the value is -1, the P value is retrieved from the Service Package.
The default value is 6.
— x - the value from -1 to 7 indicating the P value.
•
DSCP_MEDIA x is a value entered in decimal format between -1 and representing the DSCP value in the Real-time Transfer Protocol packets. If the value is -1, the DSCP value is retrieved from the Service
Package. The default value is 44.
— x - a value from -1 to 63 indicating the DSCP value.

Download 1.47 Mb.

Share with your friends:

1 ... 23 24 25 26 27 28 29 30 ... 76