Sip firmware Release 1 for ip phone 1140e administration

•FORCE_OCT_ENDDIAL YES | NO

Download 1.47 Mb.

View original pdf

Page	26/76
Date	14.08.2023
Size	1.47 Mb.
	#61855

1 ... 22 23 24 25 26 27 28 29 ... 76

NN43113-300 02.05 1140E Adm

SNTP_ENABLE YES | NO

•
FORCE_OCT_ENDDIAL YES | NO is a flag used to override attempts to change the function of the pound (#) key on the Graphical User
Interface (GUI. The default setting is NO YES - overrides attempts to change the function of the pound (key on the GUI NO - does not override a change of the function of the pound (key on the GUI.
•
SNTP_ENABLE YES | NO allows the IP Phone E to obtain the time and date from an NTP server. The default is NO.
The IP Phone E updates the time once every 24 hours from the
NTP server. If the IP Phone E cannot contact the server, the IP
Phone E tries every 15 minutes up to a maximum of 6 attempts,
and then hourly attempts are made. If SNTP_ENABLE is set to NO
the IP Phone E tries to retrieve the time and date from the SIP
proxy server. However, not all SIP proxy servers support this method of retrieving the time and date YES - enables NTP.
— NO - disables NTP.
•
SNTP_SERVER [ip_address] is the IP address or FQDN of the NTP
server that provides the time and date to the IP Phone E. If this is not specified, the IP Phone does not generate any NTP requests.
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

44
Configure the provisioning server ip_address - the IP address of the NTP server in either Fully
Qualified Domain Name (FQDN) or non-FQDN format.
•
MADN_TIMER x is used to set the MADN polling timer interval (the interval at which the IP Phone E attempts to determine the MADN
group of the logged-in user. The minimum value for the polling interval is 900 seconds (15 minutes. The default value is 1800.
— x - the time delay (in seconds) between queries to find the MADN
group DN of a user. The minimum value 900.
•
MADN_DIALOG YES NO is used to set the SIP URI or the GROUP
DN for the subscription to the dialog event. The default value is NO YES - subscribes to the dialog event using the SIP URI of the user NO - subscribes to the dialog event using the group of the user.

Download 1.47 Mb.

Share with your friends:

1 ... 22 23 24 25 26 27 28 29 ... 76